Air Compressor

CONTINUATION SHEET SCBA Fill Station/Air Compressor FY 26 (IMCOM) REFERENCE NO. of DOCUMENT Being continued PAGE 1 of 8 NAME OF OFFER OR CONTRACTOR CLIN SUPPLIES/SERVICES QUANT. UNIT UNIT PRICE AMOUNT 001 Breathing air filling system, consisting of: PE 700-VE compressor – PN 330 bar oF silent Soundproofed breathing air compressor for a safe supply of breathing air for the fire department Delivery volume: 700 liters/min. 4 filling stages Drive: Three-phase current 400//50 Hz Weight: approx. 420–490 kg Dimensions in cm: LxWxH: 148 x 83 x 152 Sound pressure level: max. 73 dB(A)* +/- 2 db(A) *In silent version COMPRESSOR BLOCK: - Micronic intake filter. - Low-pressure lubrication. - Intercooler. - Aftercooler after the last stage with stainless steel cooling fins for effective cooling. - Intermediate pressure safety valves after each stage. - 4 cylinders, 4 stages, X design. - With oil pressure lubrication including oil filter. - Compressor block, air filter, and oil filler neck must be freely accessible for easy maintenance. - The compressor block must be equipped with a load cycle counter. The display must be via the operating display. - The system must be completely installed in a stable body. All components rigidly connected to the block must be delivered mounted on a vibration frame. - Compressor block with oil sight glass for visual inspection of the oil level CONTROL: An automatic control system must be supplied in the breathing air compressor with the following parameters: - 3.5" TFT color display with plain text display. - Semi-automatic or fully automatic operation, manually switchable. - Temperature monitoring of the last stage. - Temperature monitoring of the permissible ambient temperature (+5 to +45°C). - Oil pressure monitoring. - Operating hours counter. - Display of service intervals and error history for easy maintenance and error analysis. 1 EA -- 1 of 8 -- CONTINUATION SHEET REFERENCE NO. of DOCUMENT BEING CONTINUED PAGE 2 of 8 - Compressor control settings in local language. - Load cycle counter. - Password protection for various menu levels. - Logbook; exportable via SD card and analyzable in Microsoft Excel. - Automatic start-stop. - Independent switching on and off must be ensured. - The remaining filling time of the current filling process must be displayed. - Operation and menu navigation must be possible via an additional, parallel display with identical display and function as on the compressor, located in a separate room, mounted for remote control. - It must be possible to display operating data using symbols, maintenance information, and error messages. - Simple software updates must be possible using an SD card. TREATMENT SYSTEM: - A filter system with integrated oil and water separator and long filter service life must be installed. Air quality in accordance with DIN EN 12021:2014-07 must be guaranteed. Automatic filter monitoring must continuously check the moisture content of the air inside the filter container and switch off automatically when the filter is saturated. - The saturation level of the filter cartridge must be displayed directly on the home page of the control system. - Measurement of filter saturation directly in the filter cartridge, thus no sensor calibration necessary. - Advance warning of impending saturation. - Automatic shutdown when saturation is exceeded. - Restart only possible after inserting a new cartridge. - An automatic condensate drain must be provided, which automatically drains condensate from all separators during operation and when switching on and off. - It must be possible to control the frequency and duration of the drainage processes via a menu, individually for each stage/container. - Treatment container made of anodized aluminum to prevent corrosion. - Shelf life of the vacuum-packed filter cartridge of at least 2 years. Acceptance test certificate according to EN 10204-3.2 -- 2 of 8 -- CONTINUATION SHEET REFERENCE NO. of DOCUMENT BEING CONTINUED PAGE 3 of 8 TUEV-tested safety valve 220 or 330 bar, including documentation in accordance with the above compressor. Declaration of conformity according to Pressure Equipment Directive 2014/68/EU Declaration of conformity of the pressure test in accordance with the requirements of the DGRL External suction device Compressor pre-equipped for connection to the intake air provided on site Including following options: Compressor mounting kit Compressor preparation for transport to the place of use Connection kit for connection to the intake air pipe laid on site (approx. 1 m). Transport of the compressor to the place of use by the client For cooling and intake air, please refer to the manufacturer's guidelines. Installation and connection of a compensation elbow to reduce vibrations on the pipe and the building. Installation of a premium stainless steel shut-off valve with Peek. Switching strip, consisting of: Switching strip with START/STOP button START/STOP button with compressor operating light, fault indicator light, EMERGENCY STOP switch. Halogen-free control cable from breathing air compressor to switch strip including installation Billing according to measurements (assumption approx. 10 m) Cable duct provided on site, existing cable tray used. Breathing Gas Monitoring (CO, CO2, O2, humidity, and oil) Continuous monitoring of breathing air quality in accordance with EN12021:2014 with regard to CO, CO2, O2, humidity, and VOC (oil). The breathing air monitoring unit is housed in a single enclosure. Simultaneous and clear display of all current measured values on the screen. Display of the time history of each individually measured gas, humidity, or oil concentration. -- 3 of 8 -- CONTINUATION SHEET REFERENCE NO. of DOCUMENT BEING CONTINUED PAGE 4 of 8 - Display of measured values and their progression over time via a web interface on mobile and stationary output devices. - Option to save measured values to a USB mass storage device. - Email notification to 5 diff…