C-130 Engine and Propeller Toolboxes

HOMELAND SECURITY, DEPARTMENT OF

Notice type
Combined Synopsis/Solicitation
Solicitation #
20290PR169
NAICS
336412
PSC
1680
Set-aside
Total Small Business Set-Aside (FAR 19.5)
Posted
July 7, 2026
Response due
July 16, 2026
Place of performance
LINDA, CA

What this opportunity is

The Department of Homeland Security is seeking a total small business set-aside for the provision of C-130 Engine and Propeller toolboxes for Air Station Sacramento. The project involves supplying two identical toolboxes, each equipped with specific storage features and a comprehensive list of tools necessary for aircraft maintenance. Small businesses interested in this opportunity should note that it is a combined synopsis/solicitation, indicating they will need to track the notice closely for bidding details and requirements.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

STATEMENT OF WORK FOR AIR STATION SACRAMENTO C-130 Engine and Propeller Toolboxes 1.0 SCOPE 1.1 Scope of work. The purpose of this statement of work (SOW) is to describe the specifications and scope of establishing C-130 Engine and Propeller toolboxes for Air Station Sacramento’s C-130 Shop. 1.2 Point of Contact. The principal point of contact will be the Aviation Engineering Officer or designated representative. The address for the Engine and Propeller toolboxes is: Commanding Officer USCG Air Station Sacramento 6037 Price Ave Sacramento, CA 95652 2.0 REQUIREMENTS 2.1 Provide adequate tool storage and tool control for Engine and Propeller work on C-130 aircraft: 2.1.1 The storage and tool requirements include the following: 2.1.1.1 02 Silver Toolboxes, each 73 inches long, 30 inches deep. 18 drawers in total with 01 drawer banks. Widest drawer to be 50 inches. With non-directional rubber for the work surface. Lasered cut foam inserts for all required tools. Each toolbox will come lockable. 2.1.1.2 See Enclosure (a) for Complete listing of tools. Each toolbox will be identical in nature and will require two times the amount of tools listed. 3.0 USCG REPRESENTATIVE 3.1 Points of Contact. The individuals listed below will be the Government point of contract during the period. Aviation Engineering Watch Captain : (916) 634-2572 OOD: (916) 634-5190 4.0 PAYMENT 4.1 The Government will make payment for this at the completion of the statement of work. -- 1 of 7 -- 4.2 Company representative provides onsite warranty and repair. 3BK RC PRPL/BRT FOAM - 54855 - 62041 STANDARD ETCH UP TO 12 CHAR FLT .040IN X 1/4IN OFF SD PH 1-2 OFF SD 12IN PRYBR LONG NOSE PLIERS W/CUTTER LONG NOSE PLIERS W/CUTTER FLT .050IN X 5/16IN OFF SD FLT .060IN X 3/8IN OFF SD PH 1-2 OFF SD 11IN LNG RCH 35DEG NEEDLE 90DEG LONG NOSE PLIERS 7IN HEAVY DUTY COMBO PLIERS 8IN DUCK BILL PLIERS 6IN PRYBR 4IN DIAG CUTTER 7IN DIAGONAL CUTTER 11IN LONG NOSE PLIERS PLIERS 9IN LONG NOSE PLIERS RED ADAPTOR 3/8IN X 1/4IN HEXX2IN ADAPTOR 10IN ADJUSTABLE WR 12IN ADJUSTABLE WR 6IN ADJUSTABLE WR 8IN ADJUSTABLE WRNCH 3/8DR 5/8IN FLRNT C/FTWR 3/8DR 11/16IN FLRNT C/FTWR 3/8DR 3/4IN FLRNT C/FTWR 3/8DR 13/16IN FLRNT C/FTWR 3/8DR 7/8IN FLRNT C/FTWR 3/8DR 15/16IN FLRNT C/FTWR 3/8DR 1IN FLRNT 12PT C/FTWR 3/8DR 1 1/16IN FLRNT C/FTWR 1/2DR 1 1/8IN FLRNT C/FTWR 1/2DR 1 3/16IN FLRNT C/FTWR 1/2DR 1 1/4IN FLRNT C/FTWR 1/2DR 1 5/16IN FLRNT C/FTWR 1/2DR 1 3/8IN FLRNT C/FTWR 1/2DR 1 7/16IN FLRNT C/FTWR 1/2DR 1 1/2IN FLRNT C/FTWR 1/2DR 1 9/16IN FLRNT C/FTWR 1/2DR 1 5/8IN FLRNT C/FTWR 1/2DR 1 11/16IN FLRNT C/FTWR 1/2DR 1 3/4IN FLRNT C/FTWR 1/2DR 1 13/16IN FLRNT C/FTWR 1/2DR 1 7/8IN FLRNT C/FTWR 1/4DR 3/8IN FLRNT DP C/FTWR 1/4DR 7/16IN FLRNT DP C/FTWR 1/4DR 1/2IN FLRNT DP C/FTWR 1/4DR 9/16IN FLRNT DP C/FTWR CAMLOC PLIER HI-LOK REMOVAL PLIER SCREW EXTRACT-EL BRUTUS- 1/4CAP STRAP WRENCH 12I ALUM-HDL 17IN 15PC L/SHP HX WRSET 13PC L/SHP BHX SET PLIERS PLIERS RBR HEAD 11IN MAL 5/16IN 15 SHRT RAT COMWR 3/8IN 15 SHRT RAT COMWR 7/16IN 15 SHRT RAT COMWR 1/2IN 15 SHRT RAT COMWR 9/16IN 15 SHRT RAT COMWR 5/8IN 15 SHRT RAT COMWR 11/16IN 15 SHRT RAT COMWR 3/4IN 15 SHRT RAT COMWR BPEEN 12OZ FBRGL HM BPEEN 24OZ FBRGL HM COMPOSITE TAP HAMMER COMPOSITE TAP HAMMER 6IN ELECTRONIC DIGITAL CALIPER 18V 1/2 BLDC DRILL DB MODEL 14.4v & 18v DUAL BAY CHARGER 18V 5AH LI BATTRY W/SIDE LATCH 14.4V 3/8 DRILL KIT - RED WRENCH 11IN FORD 9 INCH FORD WRENCH CRIMP TOOL 60 PC COBALT BIT SET 21PC BIT SET PLASTIC CUTTER-RED 3/8DR 12PT 3/8" SHL SKT 3/8DR LNG 11.6IN BRK BAR 3/8DR 12PT 7/16" SHL SKT 3/8DR 12PT 1/2" SHL SKT 3/8DR 12PT 9/16" SHL SKT 3/8DR 12PT 5/8" SHL SKT 3/8DR 12PT 11/16" SHL SKT 3/8DR 12PT 3/4" SHL SKT 3/8DR 12PT 13/16" SHL SKT 3/8DR 12PT 7/8" SHL SKT 3/8DR 12PT 15/16" SHL SKT 3/8DR 12PT 1" SHL SKT 3/8DR 1/4" SHRT FLT TP SKT DR 3/8DR FIXED SPEEDER 17-27/32IN 3/8DR 5/16" SHRT FLT TP SKT DR 3/8DR 3/8" SHRT FLT TP SKT DR 3/8DR 80T STD FOD RAT 3/8DR 5/16" STD BALL HX SKT DR 3/8DR 3/8" STD BALL HX SKT DR 3/8DR 7/32" STD BALL HX SKT DR 3/8DR 1/4" STD BALL HX SKT DR 3/8DR 10MM STD BALL HX SKT DR 3/8DR 7MM STD BALL HX SKT DR 3/8DR 8MM STD BALL HX SKT DR 3/8DR 9MM STD BALL HX SKT DR 3/8DR 9MM STD HX SKT DR 3/8DR 10MM STBY HX SKT DR 3/8DR 7MM STBY HX SKT DR 3/8DR 8MM STBY HX SKT DR -- 2 of 7 -- 3/8DR 5/16" STBY HX SKT DR 3/8DR 3/8" STBY HX SKT DR 3/8DR 7/32" STBY HX SKT DR 3/8DR 1/4" STBY HX SKT DR 25 US/MT FL GAG (.0015-.040") 3/8DR 1/4" SCRWDR BIT SKT STRAIGHT 38 BLADE SET 3/8DR 1 1/16IN O/END C/FTWR 3/8DR 1 1/8IN O/END C/FTWR 3/8DR 1 3/16IN O/END C/FTWR 3/8DR 1 1/4IN O/END C/FTWR 3/8DR 1 5/16IN O/END C/FTWR 3/8DR 1 3/8IN O/END C/FTWR 3/8DR 1 7/16IN O/END C/FTWR 3/8DR 1 1/2IN O/END C/FTWR 3/8DR 1 9/16IN O/END C/FTWR 3/8DR 1 5/8IN O/END C/FTWR 3/8DR 3/8IN O/END C/FTWR 3/8DR 7/16IN O/END C/FTWR 3/8DR 1/2IN O/END C/FTWR 3/8DR 9/16IN O/END C/FTWR 3/8DR 5/8IN O/END C/FTWR 3/8DR 11/16IN O/END C/FTWR 3/8DR 3/4IN O/END C/FTWR 3/8DR 13/16IN O/END C/FTWR 3/8DR 7/8IN O/END C/FTWR 3/8DR 15/16IN O/END C/FTWR 3/8IN DR 1IN O/END C/FTWR 3/8DR 80T LNG RAT INDUSTRIAL DIGITAL MULTIMETER 3/8DR 2 PHLPS BIT SKT 3/8DR 3 LNG PHLPS SKT DR 3/8DR 3 LNG PHLPS SKT DR TORQ ADAPT TORQ ADAPT TORQ ADAPT TORQ ADAPT TORQ ADTP 3/8IN DR 5/8IN TORQ ADTP 3/8IN DR 11/16IN TORQ ADTP 3/8IN DR 3/4IN 7/8IN TORQUE ADAPTOR 3/8IN DR TORQ ADAPT TORQ ADAPT SPINNER 3/8DR 6PT 3/8" SHL SKT 3/8DR 6PT 7/16" SHL SKT 3/8DR 6PT 1/2" SHL SKT 3/8DR 6PT 9/16" SHL SKT 3/8DR 6PT 5/8" SHL SKT 3/8DR 6PT 11/16" SHL SKT 3/8DR 6PT 3/4" SHL SKT 3/8DR 6PT 13/16" SHL SKT 3/8DR 6PT 7/8" SHL SKT 3/8DR 6PT 15/16" SHL SKT 3/8DR 6PT 1" SHL SKT 3/8DR 6PT 3/8" SEM SKT 3/8DR 6PT 7/16" SEM SKT 3/8DR 6PT 1/2" SEM SKT 3/8DR 6PT 9/16" SEM SKT 3/8DR 6PT 5/8" SEM SKT 3/8DR 6PT 11/16" SEM SKT 3/8DR 6PT 3/4" SEM SKT 3/8DR 6PT 13/16" SEM SKT 3/8DR 6PT 7/8" SEM SKT 3/8DR 3/8IN 6PT DP UNIV SKT 3/8DR 7/16IN 6PT DP UNIV SKT 3/8DR 1/2IN 6PT DP UNIV SKT 3/8DR 9/16IN 6PT DP UNIV SKT 3/8DR 5/8IN 6PT DP UNIV SKT 3/8DR 11/16IN 6PT DP UNIV SKT 3/8DR 3/4IN 6PT DP UNIV SKT 3/…

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗