Dust Collector with Installation
DEPT OF DEFENSE
Notice type
Solicitation
Solicitation #
FA488726Q0054
NAICS
333413
PSC
4460
Set-aside
Small Business Set Aside - Total
Posted
August 21, 2026
Response due
August 31, 2026
Place of performance
Luke Air Force Base, AZ
What this opportunity is
The Department of Defense is soliciting a Firm-Fixed Price contract for the provision and installation of a wood dust collection system at Luke Air Force Base, Arizona. This opportunity is set aside for small businesses, making it suitable for those in the relevant NAICS code 333413. Interested vendors should note that funds are not currently available, and no awards will be made until funding is secured; therefore, tracking this solicitation is crucial for potential bidders.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
STATEMENT OF WORK
Wood Dust Collection System for Bldg 948
Luke Air Force Base, Arizona
1. OVERVIEW:
This purpose of this project is to provide and install a new wood dust collection system for the Packing
and Crating function of the Cargo Movement Section located at 6504 N. 142nd Ave Bldg 948. The wood
dust collection system will serve the following machines: Miter saw (2 of 4", 1 of 1-3/4") Table saw (1 of
4") Bandsaw (2 of 4") Panel saw (1 of 8", 1 of 1-3/4") Two floor sweeps (4").
2. DESCRIPTION OF WORK:
2.1 Provide and install one (1) Dust Collector, 7.5HP, 208V/60/3, with auto starter, for duct velocities
between 3500-4500 CFM. (Manual filter shaker included. Mechanical and automatic shakers are NOT
NFPA compliant. 230-gal. dump bin included)
2.2 Collector to be located inside on the south side at the west end of the working space.
2.3 Collector will be anchored to the existing concrete floor via wedge-style concrete anchors.
2.4 Provide and install Nordfab, smooth bore, clamp-together, galvanized-steel dust collection duct and
fittings.
2.5 Ducting to be supported from existing structure via 1/8", 7X7, stranded steel cable and Unistrut
framing channel, as required.
2.6 New ducting to serve a total of ten (10) drops. Eight (8) active ports and two (2) floor sweeps.
2.7 Fabricate and install one (1) new capture plenum at panel saw.
2.8 Provide and install manual balancing gates at eight (8) drops serving active ports.
2.9 Provide and install Black, Thermoplastic Rubber, dust collection duct hose at eight (8) active ports.
2.10 Provide and install two (2) new 120V, 3-Speed Remote-Controlled (750/950/1270 CFM)
ambient-air filtration units.
2.11 Ambient collector to be supported from existing structure via 1/8", 7X7, stranded steel cable and
Unistrut framing channel, as required.
2.12 Provide one (1) set of two (2) extra inner air filters and one set of four (4) extra prefilters.
2.13 Provide professional electrical services as listed below:
- Install conduit, boxes, wire, from existing electrical panel to new 208V disconnect, continuing
to new S-750 dust collector controls.
- Install push button star/stop on or near new dust collector.
- Install one (1) new 120V outlet to serve air compressor auto-drain.
- Install two (2) new 120V outlets to serve ambient air cleaners.
2.14 Bump collector fan motor to check rotation.
2.15 Install must include the cost of any equipment and rental vehicles needed to complete the
installation.
2.16 Install must include the cost to ship the product to the installation site.
-- 1 of 2 --
2.17 Install must include the removal of the old system and components and removal of all packaging for
the new system.
2.18 Install must include a minimum of 12 months warranty for all parts and labor.
END STATEMENT OF WORK
-- 2 of 2 --
Source: SAM.gov, as posted. Verify the current solicitation before responding.
Pursue this opportunity with Mindy
See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.
View the original notice on SAM.gov ↗