METALLIC PIPE

1 MATERIAL ORDERING DATA MIL-T-16420 Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award. IDN: N4523A 6166-1203 ICN: 38WAI25605 KO: S02 KOI: 011 Paragraph 6.1 Ordering Data A. MIL-T-16420K, TUBE COPPER-NICKEL ALLOY, SEAMLESS AND WELDED (COPPER ALLOY NUMBERS 715 AND 706), 14 APRIL 1978 INCLUDING AMENDMENT 1, 16 SEPTEMBER 1988. B. Composition: 70/30 Temper: Annealed Type: II Class: 50 Grade: 2 C. Whether hydrostatic testing is required for tube subject to ultrasonic inspection: N/A D. Whether an alternate nondestructive test method is proposed: N/A E. Whether ultrasonic test is required for class 50 and 200 tube: N/A F. When ultrasonic test of flat product is required: N/A G. Whether magnetic permeability testing is required for alloy 706 tube: N/A H. Dimensions of standard tube required: 16" OD x 0.165" WALL I. Dimensions of nonstandard tube and class required: N/A J. Length of tube or schedule of lengths required and whether exact or mill lengths: 20 FT LONG K. Whether tube marking is required: REQUIRED L. Quality assurance requirements: not required M. Hydrostatic test pressure required (minimum and maximum) for special class tube: N/A N. Level of packaging and packing required, if other than specified: N/A O. Maximum gross weight of container: N/A Additional Data Requirements: All unit, intermediate and shipping containers must be marked in accordance with MIL-STD- 129. Refer to DLA Procurement Note C20 for further instructions Prepared By: Jonathan Jazo Code: 260.9 -- 1 of 1 --