Request for Information/Sources Sought Antilock Brake System/Electronic Stability Control (ABS/ESC) Retrofit Kits for the High Mobility Multipurpose Wheeled Vehicle (HMMWV)

Comments, suggestions, or questions on this document should be addressed to U.S. Army Tank- automotive and Armaments Command, ATTN: AMSRD-TAR-E/CM/DM/STND MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000 or emailed to dami_standardization@conus.army.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at http://assist.daps.dla.mil. DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND ATPD-2099E 21 January 2009 PURCHASE DESCRIPTION HIGH MOBILITY MULTIPURPOSE WHEELED VECHICLE (HMMWV) This specification is approved for use by the U.S. Army Tank-automotive and Armaments Command and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This system specification identifies the physical, performance and inspection requirements for the A2 series and Expanded Capacity Vehicle (ECV) series of the High Mobility Multi-Purpose Wheeled Vehicles (HMMWV). Unless otherwise noted in this specification, the M1123 variant shall be included as part of the A2 series of vehicles. Also the M1151/M1152/M1165/M1167 shall be included as part of the ECV series of vehicles. In simple terms, the M1151 has the body of the M1025A2 and placed onto the chassis of the ECV; the M1152 has the body of the M1097A2 (2-man version) placed onto the chassis of the ECV; the M1165 has the body of the M1097A2 (4-man version) placed onto the chassis of the ECV; and the M1167 is the TOW/ITAS variant based off of the M1151. (See Addendum in rear.) The system specification establishes these requirements by identifying the following: a. Technical data requirements from which the vehicle is to be produced. b. Physical characteristics and performance requirements for the vehicles produced. c. Identification of the performance and quality test requirements used to verify the vehicles meet the specified performance standards. The technical data package provided as part of this system specification identifies specifications and installations at a component level. The TDP does not identify the performance requirements of the final assemblage of these components at the system level. The physical characteristics and performance requirements are identified by this specification. Therefore, this specification shall form the basis for establishing and evaluating the vehicle's physical characteristics and performance. 1.2 General Description. The A2 vehicles represent the third stage of HMMWV evolution. The ECV vehicles represent the fourth stage of HMMWV evolution. Like the basic HMMWV and A1 series, the A2 and ECV vehicles are comprised of many common components. The various models are defined by different body configurations designed to meet -- 1 of 43 -- ATPD 2099E particular mission roles. These roles include transport of materials, weapon systems, equipment, and personnel. While operating in these roles the vehicles are operated on primary and secondary roads, trails and off road terrain. The vehicles are also capable of fording water and operation in temperatures ranging from Basic Cold to Basic Hot conditions. With application of kits, the vehicles are also capable of arctic operation and deep water fording. Some major changes for the A2 and ECV vehicles include: 1. 6.5 Liter Engine (Turbo for ECV) 2. 4L80 Electronic Transmission 3. New Radiator 4. New Exhaust w/Catalytic Converter 5. Central Tire Inflation System Ready 6. Improved Air Cleaner 7. Dual Voltage Electrical System 8. Improved Collapsible Steering Column 9. Relocated Driver's Mirror 10. Higher Capacity Cargo Bed Tiedowns 11. Sun Visors 12. Improved Heater System 13. 3-1/2 Ton Jack 14. Improved Rear Seats 15. 10,500 Pound Hydraulic Winch Kit 16. Swing away oil cooler 17. Improved corrosion resistance 18. Reliability Enhancements 1.3 Vehicle Variants. The A2 and ECV vehicle variants are described as follows: Model Number Nomenclature M997 A2 Truck, Ambulance, 4 Litters, Basic Armor M1025 A2 Truck, Utility, Armament Carrier, Basic Armor M1035 A2 Truck, Ambulance, 2 Litters, Soft Top M1043 A2 Truck, Utility, Armament Carrier, Supplemental Armor M1045 A2 Truck, Utility, TOW Carrier, Supplemental Armor M1097 A2 Truck, Utility, Heavy Variant M1123 Truck, Utility, Heavy Variant M1113 Truck, Utility, Expanded Capacity M1114 Truck, Utility, Expanded Capacity, Up-Armored, Armament Carrier M1151 Truck, Utility, Expanded Capacity, Armament Carrier, 11,500 GVW, Base with AC M1151A1 Truck, Utility, Expanded Capacity, Armament Carrier, IAP/Armor Ready, 12,100 GVW 2 -- 2 of 43 -- ATPD 2099E M1151A1 w/B1 Kit Truck, Utility, Interim Armored, Armament Carrier, 12,100 GVW, IAP W/B1 Armor Kit M1152 Truck, Utility, Expanded Capacity, Enhanced, 11,500 GVW, Base with AC M1152A1 Truck, Utility, Expanded Capacity, Enhanced, IAP/Armor Ready, 12,100 GVW M1152A1 w/B2 Kit Truck, Utility, Interim Armored, Enhanced, 12,100 GVW, IAP W/B2 Armor Kit M1165 Truck, Utility, Command and Control / General Purpose Vehicle, 11,500 GVW, Base with AC M1165A1 Truck, Utility, Command and Control / General Purpose Vehicle, IAP/Armor Ready, 12,100 GVW M1165A1 w/B3 Kit Truck, Utility, Interim Armored, Command and Control / General Purpose Vehicle, 12,100 GVW, IAP W/B3 Armor Kit M1167 Truck, Utility, TOW Carrier, Armored, 13,100 GVW, IAP W/B1 Armor Kit 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed. 2.2 Government Documents. 2.2.1 Specifications, sta…