Second Harmonic Generation Microscope

Requirements / Specification Document Requirements / Specifications: Second Harmonic Generation MicroscopeNB688000-26- 01634 1 Version 1.0 (2019) Double-click on  for further assistance. Use this document to detail specifications/requirements for an item and/or ancillary services.  TITLE: Second Harmonic Generation Microscope NB688000-26-01634  Requesting Lab/Division/Group: Physical Measurements Laboratory / Time and Frequency Division / Quantum & Nonlinear Nanophotonics Group General Statement of Need  We require a scanning confocal microscope configured with a pulsed laser source and second harmonic detector. All components may be used/refurbished condition (preferred). The laser should be order of <200 fs pulse duration, with a center wavelength ~800 nm and tunable ~200 nm, avg power >1 W. Typically, these are commercial titanium-sapphire pulsed laser sources. The microscope must support imaging of electrically poled domains in thin-film lithium niobate. Imaging is achieved by focusing the pulsed laser onto the thin film and detecting the reflected (reflection mode uses e.g., a dichroic to direct only the SH light to a detector) second harmonic light generated in the sample on a high sensitivity detector (e.g. visible PMT). By scanning the sample stage or beam, the second harmonic light vs. position enables constructing a map/image of the device, sensitive to crystal domain orientation since the detected signal is dependent on second harmonic generation. Items and/or Ancillary Services  Item 1: Scanning laser confocal microscope, reflection mode, SHG mode, with near-IR fs-pulsed source and high sensitivity visible wavelength detectors (e.g. Zeiss 510/780 or comparable) (used/refurbished is ok/preferred) Quantity: 1 Specifications: 1.1: Scanning laser microscope system with 2 photon/SHG detection / visible wavelength detection capability. 1.2: Reflection mode operation suited to imaging hard, nonlinear optical thin films (lithium niobate) on oxidized silicon wafers (detected light is reflected from wafer and directed to detectors via e.g. inline dichroic). 1.3: High sensitivity detectors (PMTs) suited to visible wavelength operation, sufficiently sensitive for collecting visible SHG light as driven by puled laser source. 1.4 Suitable optical filters for pump light rejection as required to enable high-sensitivity detection of SHG light. 1.5: Probe beam polarization control. 1.6: High magnification microscope objective for image resolution (>50x, 100x preferred). 1.7: Control PC or software Separately Priced Options and Services: Item 2: FS-pulsed-class excitation laser center wavelength ~800 nm and auxiliary components for operation (e.g. commercially available Coherent Chameleon Ti:Sapp, Spectra Mai Tai, or comparable) (used/refurb is ok/preferred) -- 1 of 4 -- Requirements / Specification Document Requirements / Specifications: Second Harmonic Generation MicroscopeNB688000-26- 01634 2 Version 1.0 (2019) Double-click on  for further assistance. Quantity: 1 Specifications: 2.1: Pulse width <200 fs. 2.2: center wavelength ~ 800 nm, tuning ~ 200 nm range). 2.3: Avg Power >1W. 2.4: Includes all components required for operation, e.g. chiller if needed. Item 3: Warranty 1 year full service Item 4: Installation / Training onsite Service Requirements / Item Specifications Section  Requirements/Specifications  Planning Considerations ☒ N/A ☐ List any visits required to allow potential vendors to see site specific constraints. [Explain requirement here] ☐ US citizen required on-site (foreign nationals require preregistration 30 days prior) ☐ Vendor rep on-site more than three days ☐ Other considerations: [List other considerations to ensure an accurate quote] Shipping & Delivery ☐ N/A [Enter shipping and delivery information by item here.] Shipping criteria: ☐ Partial delivery acceptable ☒ Direct delivery to building required Delivery to NIST Boulder shipping/receiving is ok - Building has: ☒ Loading dock ☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here] Delivery date criteria: ☐ Delivery of goods, installation, and training shall be completed no later than: 12 weeks ARO ☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements] Electronic Media ☐ N/A Microscope control software (optionally, PC with software installed) ☒ Software ☒ Electronic manuals ☐ License Key ☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here] Installation ☐ N/A [Enter installation requirements by item here.] ☒ Vendor technician on site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of packaging material ☒ Equipment set up ☒ Start-up services ☐ Turn key installation -- 2 of 4 -- Requirements / Specification Document Requirements / Specifications: Second Harmonic Generation MicroscopeNB688000-26- 01634 3 Version 1.0 (2019) Double-click on  for further assistance. ☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point. Facility / Utility Considerations ☒ N/A [List site specific utility considerations by item here.] ☐ OFPM Work Order Number(s) [List any Work Order Number(s) here] ☐ Power available Voltage: [Enter voltage here] (V) Max Current: [Enter max current draw here] (A) Phase: [Choose phase] Frequency: [Typically 60Hz] (Hz) NEMA Plug Type: [Enter plug type here] (i.e.: NEMA L5-20P) Environment: [Choose environment] Other power consideration: [List any other power considerations here] ☐ Utility connections: [List relevant available utilities, pressure(s), and flowrate(s)] ☐ Other considerations: [List other considerations to ensure an accurate quote] Warranty  ☐ N/A Base Manufacturer Warranty is acceptable One year full service What is included? ☒ Labor ☒ Parts ☒ Travel ☒ Cost and liability for returns ☐ Other: [Enter other requirements here] ☒ Warranty length: 1 year Period Length…