Tunable Lasers and Optical Power Meter

FA875126Q0891 Minimum Specifications FA875126Q0891 Attachment No. 1 Item 1, Qty. 1 each – Tunable Laser meeting or exceeding the following specifications: ● Tuning Range: 1240-1380 nm or wider, ● PM Fiber output with FC-APC compatible connector ● At least 100 nm/s wavelength sweeps ● Wavelength resolution: 0.1 pm or finer ● signal-to-noise ratio: 90 dB/0.1 nm or higher ● Fine tuning scan range: 10 GHz or higher ● Typical wavelength stability: more stable than 5 pm ● Wavelength accuracy: 20 pm or more accurate ● Wavelength repeatability: 6 pm or more repeatable ● Output power at 1310 nm: >10 dBm, ● Output power at 1351 nm: >10 dBm ● Power stability: 0.05 dB or more stable ● Power repeatability: 0.05 dB or more stable ● Relative intensity noise at 100 MHz from carrier: less than -140 dB/Hz. ● Instantaneous linewidth: <10 kHz ● coherence control on: less than 50 MHz Item 2, Qty. 1 each – Tunable Laser meeting or exceeding the following specifications: ● Tuning range: 1480 – 1640 nm or wider ● PM fiber output with FC-APC compatible connector ● At least 100 nm/s wavelength sweeps ● Wavelength resolution: 0.1 pm or finer ● signal-to-noise ratio: 90 dB/0.1 nm or higher ● Fine tuning scan range: 10 GHz or higher ● Typical wavelength stability: more stable than 5 pm ● Wavelength accuracy: 20 pm or more accurate ● Wavelength repeatability: 6 pm or more repeatable ● Output power at 1550 nm: >10 dBm, ● Output power at 1558 nm: >10 dBm ● Power stability: 0.05 dB or more stable ● Power repeatability: 0.05 dB or more stable ● Relative intensity noise at 100 MHz from carrier: less than -140 dB/Hz. ● Instantaneous linewidth: <10 kHz ● coherence control on: less than 50 MHz Item 3, Qty. 1 each – Optical Power Meter meeting or exceeding the following specifications: • Optical Power Meter, 2 Detectors minimum • Adjustable averaging time: 100 microseconds to 1 second or wider -- 1 of 2 -- FA875126Q0891 Minimum Specifications FA875126Q0891 Attachment No. 1 • Analog output: at least 2 volts across output range • Remote interface for computer via USB or ethernet Item 4, Qty. 2 each – Remote Power Meter head meeting or exceeding the following specifications: • 2mm size minimum, InGaAs Remote Head • Must be compatible with power meter above • Wavelength range: 850 – 1700 nm or wider • Power range: -80 to +8 dBm • Power uncertainty across range: less than 4% • Power resolution: less than 0.01 dB • Wavelength resolution: 1 nm or less • Linearity: 5% deviation or less across entire wavelength range • Polarization dependent response: less than 2% difference -- 2 of 2 --