USCGC SAWFISH (WPB-87357) DRYDOCK

USCGC SAWFISH (WPB-87357) DRYDOCK AVAILABILITY FY2027 1 (Rev-0) SOURCES SOUGHT NOTICE USCGC SAWFISH (WPB-87357) DRYDOCK 70Z08026PBPLSAWFISHDD This is a SOURCES SOUGHT NOTICE not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Class Deviation 25-06 Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Class Deviation 25-11 Part 6 and FAR Class Deviation 26-03 (Rev. 1) Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, Norfolk, VA to identify sources capable of providing the following: SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform drydock repairs to the U.S. Coast Guard Cutter (USCGC) SAWFISH (WPB-87357). The vessel is home ported in Gulfport, MS. All work will be performed at the contractor’s facility. There is no geographical restriction for this cutter. SCOPE OF WORK: The scope of the acquisition is for the drydock repairs of the USCGC SAWFISH (WPB-87357). This work will include, but is not limited to the following Work Items: WORK ITEM 1: Structural Analysis, 3D Laser Scan, Perform WORK ITEM 2: Hull Plating (Side Scan), Ultrasonic Testing WORK ITEM 3: Ultrasonic Thickness Measurements, Perform WORK ITEM 4: U/W Body, Preserve, 100 percent WORK ITEM 5: Hull Plating Freeboard, Preserve, 100 Percent WORK ITEM 6: Tank, Dirty Oil, Clean and Inspect WORK ITEM 7: Tank, Oily Water, Clean and Inspect WORK ITEM 8: Tanks, MP Fuel Service, Clean and Inspect WORK ITEM 9: Decks, Exterior (Main Deck), Preserve WORK ITEM 10: Capastic Fairing, Depth Sounder, Renew WORK ITEM 11: Watertight Closures, Assess WORK ITEM 12: Main Engine/Reduction Gear, Realign WORK ITEM 13: Intermediate Water-Lubricated Propulsion Shaft Bearings, Renew WORK ITEM 14: Aft Water-Lubricated Propulsion Shaft Bearings, Renew WORK ITEM 15: Intermediate Bearing Carriers, Renew WORK ITEM 16: Aft Bearing Carriers, Renew WORK ITEM 17: Propulsion Shafts, Renew WORK ITEM 18: Stern Tube Interior Surfaces, Preserve, 100 Percent -- 1 of 4 -- USCGC SAWFISH (WPB-87357) DRYDOCK AVAILABILITY FY2027 2 (Rev-0) WORK ITEM 19: Propellers, Renew WORK ITEM 20: Electrical Power Distribution System, Thermographic Inspection, 450 VAC And Below WORK ITEM 21: Fathometer Transducer, Renew WORK ITEM 22: Speed Log, Skin Valve, Renew WORK ITEM 23: Ventilation System, Engine Room Supply and Exhaust Fan Assemblies, Clean and Inspect WORK ITEM 24: Ducting, HVAC System, Clean WORK ITEM 25: Sea Water System, Perform Maintenance WORK ITEM 26: Rudder Assemblies, Renew WORK ITEM 27: Stern Launch Door, Remove, Inspect and Reinstall WORK ITEM 28: Grey Water Holding Tanks, Clean and Inspect WORK ITEM 29: Sewage Holding Tanks, Clean and Inspect WORK ITEM 30: Grey Water Piping, Clean and Flush WORK ITEM 31: Sewage Piping, Clean and Flush WORK ITEM 32: Cathodic Protection/Zinc Anodes, Renew WORK ITEM 33: Drydock WORK ITEM 34: Temporary Services, Provide - Cutter WORK ITEM 35: Sea Trial Performance, Support, Provide WORK ITEM 36: Seawater Cooling Piping/Valves, Renew WORK ITEM 37: Exhaust Concentric Rings, Inspect/Repair Renew WORK ITEM 39: Critical Coated Surface(s), Preserve WORK ITEM 40: Carpeting, Renew WORK ITEM 41: Flood Lights, Modify WORK ITEM 42: Intrusion Detection System, Replace ANTICIPATED PERIOD OF PERFORMANCE: The period of performance is anticipated to be for 63 calendar days with a start date of 02/02/2027 and end date 04/06/2027 (subject to change at the discretion of the Government). ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e- mail Kurt Hoyer Kurt.E.Hoyer@uscg.mil and LaToya Sorrell Latoya.N.Sorrell@uscg.mil no later than 4:00 pm on 07/03/2026, 1. Name of Company, Address and Unique Identifier Number. 2. Point of Contact and Phone Number. -- 2 of 4 -- USCGC SAWFISH (WPB-87357) DRYDOCK AVAILABILITY FY2027 3 (Rev-0) 3. Business Size applicable to the NAICS Code: a. 8(a) Small Business Concern; b. HubZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming …