B-2 Test Program Set Interface Test Adapters

STATEMENT OF WORK FOR B-2 TEST PROGRAM SET INTERFACE TEST ADAPTERS Software Directorate, Tinker Air Force Base Prepared by: Cade Guitron 557 SWES/MXDPBA 4 March 2026 -- 1 of 24 -- Statement of Work 4 March 2026 TABLE OF CONTENTS P ARAGRAPH P AGE B-2 TEST PROGRAM SET INTERFACE TEST ADAPTERS PAGE ii 1 SCOPE OF WORK ................................................................................................................. 1 2 GOVERNMENT POINTS OF CONTACT ............................................................................ 1 3 CONTRACTOR POINTS OF CONTACT ............................................................................. 2 4 APPLICABLE GOVERNMENT & INDUSTRY STANDARDS ......................................... 2 5 ITA DESIGN REQUIREMENTS ........................................................................................... 4 6 DESIGN REVIEW.................................................................................................................. 8 7 PRODUCTION ..................................................................................................................... 11 8 QUALIFICATION TESTING .............................................................................................. 12 9 TEMPERATURE TESTING EVENT .................................................................................. 15 10 ACCEPTANCE TESTING ................................................................................................... 16 11 OTHER DELIVERABLES ................................................................................................... 18 12 SUMMARY OF REQUIRED SUBMITTALS ..................................................................... 19 13 LIST OF ACRONYMS & INITIALISMS............................................................................ 20 -- 2 of 24 -- Statement of Work 4 March 2026 TABLE OF TABLES TABLE P AGE B-2 TEST PROGRAM SET INTERFACE TEST ADAPTERS PAGE iii Table 1. Summary of Required Deliverables.................................................................................. 19 -- 3 of 24 -- Statement of Work 4 March 2026 LIST OF APPENDICES B-2 TEST PROGRAM SET INTERFACE TEST ADAPTERS PAGE iv Appendix A: Appendix B: Appendix C: Appendix D: Appendix E: Appendix F: Appendix G: Appendix H: Appendix I: BRU-44 Cable Drawings & Parts List PRIB Electrical Drawing & Parts List SIB Electrical Drawing & Parts List CDRL 001 – Contractor Points of Contact CDRL 002 – Preliminary Technical Data Package CDRL 003 – Design Review Presentation CDRL 004 – Qualification Test Reports CDRL 005 – Final Technical Data Package CDRL 006 – Project Residuals -- 4 of 24 -- Statement of Work 4 March 2026 B-2 TEST PROGRAM SET INTERFACE TEST ADAPTERS PAGE 1 1 S COPE OF WORK 1.1 Scope of Work The following establishes the minimum requirements for the design, testing, purchase, and delivery of Interface Test Adapters (ITAs) for use with the new TITAN receiver on the Common Organizational Level Tester (COLT). The Contractor shall develop and construct a first article to verify satisfactory ITA design and functionality. Full-rate production of the remaining ITAs, quantities described herein, is contingent upon successful Qualification Testing of the first articles by the Contractor and successful Acceptance Testing of the first articles by the Government Points of Contact (GPOCs). The minimum requirements for both types of testing and when they are to be executed are described in this document and its Appendices. When Acceptance Testing is successfully completed on any ITA, it shall be considered as delivered and become Government property. Upon successful acceptance of the final full-rate production ITA, the Contractor shall deliver to the Government all remaining technical data and physical items purchased for/relating to the design and production of the ITAs. 1.2 Background For any and all uses of the phrase “Interface Test Adapter (ITA)” within this Statement of Work (SOW) and its Appendices; an “Interface Test Adapter (ITA)” shall be defined as the individual conglomerate electromechanical items that are named in Appendices A, B, and C, respectively. Within the B-2 Rotary Launcher Assembly (RLA) Test Program Set (TPS), B-2 Smart Bomb Rack Assembly (SBRA) TPS, B-2 Massive Ordnance Penetrator (MOP) Interface Test (MIT) TPS, and B-2 Bomb Rack Unit-44 (BRU-44) TPS there are older fielded versions of the ITAs. Each of the aforementioned TPSs use the COLT as their Automated Test System (ATS). The COLT, at the date of this document, uses proprietary MAC Panel MPX Connectors to interface with each TPS through an ITA. In the future, the COLT will be replacing the MPX Connectors with APEX Connectors and the TITAN Receiver—both of which are also MAC Panel proprietary products. In order to maintain continuity of service for the end user, the existing ITAs are to be replaced with the Contractor’s new ITAs and interface with the APEX Connectors and TITAN Receiver. The new ITAs shall be named, and from here on referred to as, the Powered RLA Interface Box (PRIB), SBRA Interface Box (SIB), and BRU-44 Cable (W1). The PRIB is to be used with the RLA TPS. The SIB is to be used with the SBRA TPS and the MIT TPS. The BRU-44 Cable is to be used with the BRU-44 TPS. 2 G OVERNMENT POINTS OF C ONTACT During the post-award phase, for any technical questions regarding the requirements in this SOW and its Appendices the Contractor shall contact the following Government Point of Contacts (GPOCs) within the Software Directorate. Communications to the GPOCs shall be by e-mail, but Technical Interchange Meetings can be hosted by the GPOCs over Microsoft Teams at the request of the Contractor or the Government. Any meetings hosted over Microsoft Teams by the GPOCs shall be recorded by the GPOCs. Should both of the GPOCs be unavailable for any period of time that exceeds five business days during the post-award phase, then they shall designate alte…