Bldg 210 Generator Protection System

SOLICITATION # W50S9A26QA013 ATTACHMENT 1 – STATEMENT OF OBJECTIVES BLDG 210 GENERATOR PROTECTION SYSTEM FOR ROLAND R. WRIGHT ANG BASE SALT LAKE CITY, UTAH DATE: 6 JULY 2026 -- 1 of 5 -- 1. Purpose The purpose of this Statement of Objectives (SOO) is to obtain contractor support to design, deliver, and install a physical and visual safeguarding system to protect Building 210’s backup generator. The mission is to protect these assets from emerging localized aerial threats, specifically denying visual reconnaissance and preventing kinetic damage from off-the-shelf unmanned aerial systems (UAS), ensuring uninterrupted power generation for mission-critical base operations. The objective is to acquire a Generator Protection System (GPS) that maximizes operational readiness through modular design, rapid deployment, and a low lifecycle maintenance footprint. 2. Minimum Requirements 2.1. Able to survive or limit damage on protected/covered asset/infrastructure from UAS with gross takeoff weight up to 20 lbs (DoD UAS Group 1 Category) and/or with a kinetic explosive payload up to 50 lbs 2.2. Will not impede generator airflow, exhaust, or cooling, allowing the generator to operate at full capacity without thermal degradation. 2.3. Shall provide personnel access (i.e., door, flap, curtain, etc.) to the generator for routine servicing, refueling, and emergency repairs. 2.4. Netting material shall be UV-resistant, moisture-resistant, rust-resistant, fire-retardant, and it shall have a minimum expected lifespan of no less than 5 years + extended warranty up to 5 yrs. 2.5. The netting system shall withstand wind gusts up to 110 miles per hour. 2.6. The deployed system must fit within the existing spatial footprint/easement surrounding the generator pad or infrastructure equipment, avoiding functional interference of adjacent structures or thoroughfares. See attached drawing/dimensions. 3. Innovative solutions 3.1. Rapid deployment capability: Maximize operational flexibility with a system designed for rapid transport, assembly, and deployment by base personnel with minimal reliance on heavy equipment (e.g., under 4 hours by 4 personnel), discuss attachment solution (i.e., leverage existing structure, stand-alone) 3.2. Camouflage: Line of Sight (LOS) and/or sensor denial/disruption capabilities. 3.3. Low Lifecycle Maintenance: Minimize the logistical footprint by utilizing materials and finishes that withstand extreme environmental conditions with minimal routine maintenance over the system's lifespan. 3.4. Modularity/Repairability: Utilize a modular physical design that allows for the rapid replacement of damaged components in the field and the seamless integration of future security upgrades. 4. Appendices: 4.1. Appendix A: Bldg 210 Generator Site Map and Dimensions -- 2 of 5 -- APPENDIX A: BLDG 210 GENERATOR SITE MAP AND DIMENSIONS PPENDIX A: BLDG 210 GENERATOR SITE MAP AND DIMENSIONS (Cont.) -- 3 of 5 -- APPENDIX A: BLDG 210 GENERATOR SITE MAP AND DIMENSIONS (Cont.) -- 4 of 5 -- APPENDIX A: BLDG 210 GENERATOR SITE MAP AND DIMENSIONS (Cont.) -- 5 of 5 --