Full and Open Competition for SDV MK11 Pillar Stern Planes and Mount Stability Fins per attachments. Request Access to the drawings through SAM. Provide your Cage Code when requesting access in SAM.

Page 1 of 9 STATEMENT OF WORK FOR SDV MK11 PILLAR STERN PLANES AND MOUNT STABILITY FINS 1.0 SCOPE The Naval Surface Warfare Center Panama City Division, (NSWC PCD) requires contractor support to fabricate four Pillar Stern Planes and four Mount Stability Fins. The contractor shall provide all facilities, materials, and labor to accomplish Statement of Work tasking specified below. 1.1 Acronym List Following is a list of acronyms used in this Statement of Work. CDRL Contract Data Requirements List CFR Code of Federal Regulations COR Contracting Officer’s Representative CUI Controlled Unclassified Information DoW Department of War FAR Federal Acquisition Regulation FOUO For Official Use Only FOIA Freedom of Information Act GFE Government Furnished Equipment GFI Government Furnished Information GFM Government Furnished Material GFP Government Furnished Property HAZMAT Hazardous Material HM/HW Hazardous Materials/Hazardous Waste IT Information Technology NATO North American Treaty Organization NDA Non-Disclosure Agreement(s) NSA PC Naval Support Activity Panama City ODC Other Direct Cost OEM Original Equipment Manufacturer OPSEC Operations Security PCO Procuring Contracting Officer PII Personally Identifiable Information PM Program Manager PSC Product Service Code SDS Safety Data Sheet(s) USN United States Navy 2.0 APPLICABLE DOCUMENTS The following documents, of the exact issue shown, form a part of this SOW to the extent specified herein. In the event of conflict between the documents referenced and the contents of this SOW, the SOW shall take precedence. Second tier and lower references, (i.e., those referenced in the primary references) shall be used for guidance only. 2.1 Military Specifications: None 2.2 Military Standards: None 2.3 Other Documents -- 1 of 9 -- Page 2 of 9 (a) Teledyne Brown Engineering Drawing 8600006, Rev A – Pillar, Stern Plane – MK 11 SDV System (Attachment 1) (b) Teledyne Brown Engineering Drawing 8600016 – Mount, Stability Fin – MK 11 SDV System (Attachment 2) 3.0 REQUIREMENTS The Contractor shall provide all labor, equipment, parts, and consumables required to fabricate four Pillar Stern Planes and four Mount Stability Fins in accordance with all the Notes and requirements on Teledyne Brown Engineering Drawings 8600006 and 8600016. Any deviation without prior approval will result in rejection. Each assembly shall be individually wrapped, boxed, labeled, and shipped to NSWC PCD. For all shipments, the Shipping customer service hours in Building 399 are: Mon-Thurs: 0715-1430 (General Cargo) Mon-Thurs: 0715-1200 (Classified) Fri: 0715-1200 (General Cargo ONLY) To make special arrangements in order to drop off outside the hours listed above, please contact the Property Management Transportation Officer. 3.1 Monthly Status Report The contractor shall prepare a monthly status report that documents the status of contractor effort towards achieving contract objectives. The report shall identify accomplishments to date and difficulties encountered, and compare the status achieved to planned goals and the resources expended. (CDRL A001) 4.0 GOVERNMENT FURNISHED PROPERTY 4.1 Government Furnished Equipment (GFE): None 4.2 Government Furnished Information (GFI): Drawings will be provided for fabrication purposes. 5.0 DATA DELIVERABLES Data shall be provided in accordance with the Contract Data Requirements List (CDRL) DD Form 1423. 6.0 PERIOD OF PERFORMANCE Base Period of Performance: The items shall be delivered no later than 30 days after receipt of award. -- 2 of 9 -- Page 3 of 9 7.0 SECURITY This task involves access to Controlled Unclassified Information (CUI). Performance under this contract shall NOT require access to nor generate CLASSIFIED information. 7.1 Release of Information (a) Release of information shall be in accordance with Section I, DFARS Clause 252.204-7000, Disclosure of Information. (b) All technical data provided to the contractor by the Government shall be protected from public disclosure in accordance with the markings contained thereon. All other information relating to the items to be delivered or services to be performed under this task order may not be disclosed by any means without prior approval of the appropriate NSWC PCD authority. Dissemination or public disclosure includes, but is not limited to, permitting access to such information by foreign nationals or by any other person or entity; publication of technical or scientific papers; advertising; or any other proposed public release. The contractor shall provide adequate physical protection to such information to preclude access by any person or entity not authorized such access by the Government. 7.2 Controlled Unclassified Information (CUI) Controlled unclassified information (CUI) is official information that requires the application of controls and protective measures for a variety of reasons and has not been approved for public release, to include technical information, proprietary data, information requiring protection under the Privacy Act of 1974, and Government-developed privileged information involving the award of contracts. CUI is a categorical designation that refers to unclassified information that does not meet the standards for National Security Classification under Executive Order 13526, but is (a) pertinent to the national interest of the United States or to the important interests of entities outside the Federal Government, and (b) under law or policy requires protection from unauthorized disclosure, special handling safeguards, or prescribed limits on exchange or dissemination. 7.3 Minimum Requirements for Access to Controlled Unclassified Information (CUI) Access to CUI, user level access to DON or DoW networks and information systems, system security and network defense systems, and to system resources providing visual access and/or ability to input, delete or otherwise manipulate sensitive information without controls to iden…