Heat Shielding- Industrial Furnace

Performance: On-site Scope: Contractor shall Provide all labor, materials, tooling and supervision to manufacture, deliver and install Heat Shielding on the ITS Car Bottom Furnace to protect parts from excessive heat when opening the doors of the furnace when it is at temperature. The heat shielding to be provided shall include but is not limited to the following major components. • Door mast heat shield • Lift seal cylinder heat shield • Cart drive heat shield • Cart power reel heat shield Heat Shielding Specifications: Heat shielding shall meet a minimum of the following specifications. Door Mast: Door Mast shall be constructed from insulated stainless steel and shall be designed to protect the following components associated with the door mast. (Door Mast Components): • Door lift cylinder • Door safety lock-out cylinders • Bearings at the top of the door mast • Grease lines to the bearings Cart Bottom Seal: Individual insulated stainless steel heat shields shall be installed to protect the cylinders that raise the cart seal. Cart: An insulated stainless steel heat shield will be supplied to protect the cart drive and power cord reel. Those components are: Cart drive Cart retractable power cord reel Period of Performance: Equipment Specifications: N/A Contractor Responsibilities: "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements; Norfolk Naval Shipyard OSHE Program Manual, NAVSHIPYDNORINST -- 1 of 3 -- P5090.2 requirements; OSHE Control Manual (OSHECM) requirements; or safety requirements for site specific location of the contract." Vendor is responsible for: - Shipping equipment. - Installation service including: o Mechanical ▪ Re-assembly of equipment and components removed for shipping. ▪ Field painting of required fabricated equipment with standard colors as required. ▪ Any necessary touch-up painting. o Electrical ▪ Field wiring between equipment and/or remote-control panels, including all conduit and wire. Shipyard Responsibilities: NNSY Is responsible for: - Unloading of equipment. - Clearing pathways from unloading site to installation site for moving equipment and personnel access. - Clearing the work area around installation site. - Any required site cleaning before equipment arrival. - Notification to the vendor of the requirement for any pre-installation meetings or training necessary for plant access. - Plant PPE requirements for the vendors installation crew. - Customer site manager. Lifting and Handling Requirements: NNSY will be required to assist with the unloading of the parts and equipment delivered by the vendor. Certification of Work Requirements: N/A Testing: Operational testing of the oven will be performed. Safety or Security: Contractor will need CIA access and PPE. "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements and Norfolk Naval Shipyard -- 2 of 3 -- -- 3 of 3 --