SVO-10-T Turbo Vacuum Oven (qty 1)

STATEMENT OF WORK 1. Objective/Requirements The information listed below is required to complete the procurement of a Cascade Tek SVO-10-T Vacuum Oven for Kennedy Space Center (KSC) 2. Characteristics, Scope, and Specs LINE PART NO. DESCRIPTION QTY. 1 CTVT1022-H SVO-10-T Turbo Vacuum Oven Requirements: • Internal Volume: o 10.5 cubic foot. (297L) • Interior Dimensions: o 28.5” W x 24.5” H x 26” D • Exterior Dimensions: o 36.25” W x 62 H x 45” D • Temperature Range: o 10º C above ambient to 220ºC. • Temperature Uniformity: o +/- 6.0% of set point. • Vacuum Range: o Acceptance tested to <1.0 x 10-6 Torr @ 150ºC or better, outgas load dependent. • Vacuum Valve: o ISO160 VAT™ Gate valve • Backfill Valve: o KF25 Pneumatic VAT™ vent valve to open & close vent/purge/backfill line. (rear) • Vacuum Gauging: o Upgraded Inficon BPG400 digital full range vacuum gauge with Inficon VGC gauge controller. This controller allows the oven to display the vacuum level from 760 Torr to 3.8 x 10-10 Torr. Also includes Inficon PGE500 Foreline vacuum gauge. • Rough Vacuum Pump: o Agilent/Varian IDP-15 oil-free scroll pump. Installed and fully automated into system. • Turbo Pump System: o Pfeiffer HiPace 700 PUMP, ISO160 Turbo pump system is fully integrated and operation automated. • Access Ports: o KF25 blank. For optional feed through (rear). o CF2.75 blank for future expansion. • Temperature Controls: o Watlow F4T Touchscreen Programmable Microprocessor with Ramp & Soak Capabilities. Save up to 40 profiles with 50 steps each in controller memory. Additional profiles can be saved via Ethernet. Integrated over-temp controller. • Communication: o Standard communication is Ethernet Modbus® TCP with a RJ45 Connector. Optional: Modbus® RTU EIA-232/485 or EtherNet/IP™. *Now with Email/Text notifications*. USB for uploading profiles and saving data (optional) from the F4T (front panel). 1 -- 1 of 3 -- • Heaters: • 3872 watts. • Power (oven only): • 220-240V, 1ph, 50/60Hz, 30A, No cord/plug. Must be hardwired. • Shelves: • 3 adjustable (on .5” centers) Stainless Steel shelves on pilaster strips. • Door: • Solid Aluminum (no window) • Door Gasket: • Viton rated to 220C. • Safety: • Pressure Relief Valve in the event of over pressurization of vessel. • Shipping Weight (uncrated): • 1679 lbs. • Warranty: • 2 Year limited warranty. • Safety Certifications: • UL 61010-1, EN 61010-1, CSA 61010-1, CE • System Features: • PLC interlocked staging functions including Integrated VAT Gate Valve, chamber pressure, and Foreline gauge • Pfeiffer turbo monitor allows for the viewing of all critical pump performance information. • Roughing diversion valve, so that the chamber can be roughed thru a separate valve and not thru the Turbo pump. • Data-logging • Paperless Recorder of Time, Temp, Vacuum process • Honeywell EZTrend GR-Series Data logger • 5” touch screen. Electronically chart your drying process temperature and vacuum. USB Thumb drive for easy downloading of data. Includes Trend Manager Pro software. Installed in front control panel.  Channel 1 = Oven Temperature  Channel 2 = Vacuum level (mTorr)  Channel 3 = Foreline Vacuum Gauge  Channels 4-12 = Spare/Open channels. Optional for part temp thermocouples. • Thermal Platen – Rapid heating/cooling of internal platen. INSTALLED o Thermal Platen (Heat and “Cooling Ready”). Temp Range: - 100C to +260C. Uniformity across platen <+/-2.0°C @150C. Overtemp and undertemp monitoring with independent digital limit control. Cooling source not included, cooled with customer supplied LN2. Two Platens max. o Includes:  Process thermocouple for each shelf.  Swagelok fittings for fluid lines.  Independent PID temperature control of each platen.  Removes the shelf standards and standard shelves. 2 9521533 Custom Viewing Window (<2E-6 Torr Ultimate Pressure) Requirements: • This option upgrades the standard solid aluminum door with a viewing window. Adds a 11” x 11” glass viewing window. Reduces the ultimate vacuum attainable to <2.0 X 10-6 Torr. 1 3 910-950-0103 Honeywell Datalogger-12 Channel with 10TC Feedthru Requirements: 1 -- 2 of 3 -- • Honeywell EZTrend GR-Series Data logger – 5” touch screen. Electronically chart your drying process temperature and vacuum. USB Thumb drive for easy downloading of data. Includes Trend Manager Pro software. Installed in front control panel. o Channel 1 = Oven Temperature o Channel 2 = Vacuum level (mTorr) o Channel 3 = Foreline Vacuum Gauge o Channels 4-12 = Spare/Open channels. Optional for part temp thermocouples. 4 910-950-0037 The TQCM with cooling requires a special heat sink with cooling lines that sensor mounts to. The assembly is mounted to a custom 8” feedthrough in the top of the oven. This has the cooling lines & electrical connector mounted to it. You can connect to LN2. Does not include sensor, controller or chiller. Designed for use with CrystalTek Model 56S/T/66TR/46E/T/106CA Contact CrystalTek directly to purchase TQCM. Includes: • Add 8" CF flange with 2ea. 2.75" CF machined into blank. • 2.75" CF with cooling lines for QCM cooling plate. 2x ¼” Male VCR fittings. • 2.75" CF with electric bulkhead for QCM sensor. • Cooling plate for QCM sensor (copper) (does not include control for cooling). • QCM bulkhead electrical cable fitting and cable extension modification for interior of oven to Sensor. (Customer must supply cable to CTEK) • Price for feedthru’s, cooling lines, cooling plate for TCQM or CQCM: 1 3. Place of Performance NASA/ Kennedy Space Center BOSS Warehouse - M6-0744 Attn: Daniel Ciarlariello Mail Stop NE-L7 Kennedy Space Center, FL 32899 4. Period of Performance Need by: 9/30/2026 -- 3 of 3 --