NASA is seeking a mobile tracking system (MTS) for the ACERO Project, which includes specific refurbished components and assembly requirements. This opportunity is a total small business set-aside, making it suitable for small businesses in the manufacturing sector, particularly those classified under NAICS 334511. Interested vendors should note that the notice type is a combined synopsis/solicitation, indicating that they should track the opportunity closely and prepare to submit a bid. The performance location is at the Glenn Research Center in Ohio, with a delivery deadline of September 30, 2026.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
STATEMENT OF WORK
1. Objective/Requirements
This system pertains to the ACERO Project: Advanced Capabilities for Emergency
Response Operations. The information provided below is required to facilitate this
purchase.
2. Characteristics, Scope, and Specs
LINE PART NO. DESCRIPTION QTY.
1 MTS3-GS-11-RFB Refurbished MTS3.0 with Gimbal Stabilized Pan/Tilt Head. 1
2 MTS3-DT-RFB One (1) Parabolic Dish (Refurbished) - Requires 1x Feed
Purchase. All Mounting Hardware Included.
1
3 MTS3-AH-11 Auto-Heading Add On for All MTS3.0 Models 1
4 MTS3-SD One (1) Dual Polarization 2200-2500MHz Antenna Feed for
MTS3-DT
1
5 MTS3-TP Tripod for All MTS3.0 Models 1
6 MTS516 Silvus SC4200 Enhanced Plus Series Wiring Harness and
Mount
1
Requirements:
o Field-portable system component containers must comply with materials handling
standards, specifically for lifting containers off a pickup truck by two personnel in an
outdoor or uneven environment. Lifting loads exceeding approximately 50 pounds
increases the risk of injury. Under optimal conditions—such as the object being
directly in front, without twisting, with a secure grip, and lifting between knuckle and
shoulder height—the National Institute for Occupational Safety and Health (NIOSH)
recommends a maximum weight limit of 51 pounds (23 kg) for a single individual.
o Containers shall not occupy more than three-quarters of the cargo bed of a standard
quarter-ton pickup truck, which is capable of fitting a 4x8-foot sheet of plywood.
o System assembly shall be completed by two individuals within 20 minutes using
minimal tools, which will be provided by the vendor.
o The minimum acceptable antenna system performance shall be 25 dBi, with a target
of 28 dBi. A decrease of 3 dBi from the target represents a 50% reduction in system
performance.
3. Place of Performance
Glenn Research Center
-- 1 of 2 --
4. Period of Performance
Need by 9/30/2026
-- 2 of 2 --
Source: SAM.gov, as posted. Verify the current solicitation before responding.
Pursue this opportunity with Mindy
See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.