PUMPS FOR LIFT STATIONS

United States Department of State General Services Section Nouakchott, Mauritania Public Notice Classification Code: 4320 – PUMPS FOR LIFT STATIONS NAICS Code: 333911 – Pump and Pumping Equipment Manufacturing The US Embassy Nouakchott, Mauritania would like to purchase pumps for lift stations. The related Product description is provided as an attachment to this notice. The U.S. Embassy in Nouakchott has a requirement to purchase pumps for lift stations. Please note that this is a combined synopsis/solicitation for a commercial item, prepared in accordance with the format FAR 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. The solicitation number is 19MR6026Q0006 and is issued as a Request for Quotation. The solicitation/contract includes all applicable provisions and clauses in effect through FAC 2005-55. Offers are due by June 22, at 18:00. Contract Clause, in addendum to FAR 52.212-1, Instructions to Offerors-Commercial Items, applies to this acquisition. Award will be made to the lowest priced, technically acceptable offeror. 52.240-90 Security Prohibitions and Exclusions Representations and Certifications. -- 1 of 11 -- FAR clause 52.212-4, Contract Terms and Conditions-Commercial items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR 52.212-5, Contract Terms and Conditions to Implement Statutes or Executive Orders - Commercial Items (https://www.acquisition.gov/far/current/html/52_212_213.html#wp1179527 – include in full text), will apply to the resultant contract: 52.203-10, Price or Fee Adjustment for Illegal or Improper Activity. The following DOSAR provisions/clauses will also apply: 652.206-70, Competition Advocacy/Ombudsman; 652.214-71, Authorization to Perform; 652.225-70, Arab League Boycott of Israel; 652.225-71, Section 8(a) of the Export Administration Act of 1979, as Amended; 652.242-70, Contracting Officer’s Representative; and, 652.243- 70, Notices. All offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications - Commercial Items with their offer. Offers are due by September 23, at 18:00. All responsible sources may submit an offer that shall be considered. If there are any questions regarding the requirements set in the solicitation, please contact Nouakchott Procurement at +222 45 25 26 60. All contractors must be registered in the SAM (System for Award Management) Database https://www.sam.gov prior to contract award pursuant to FAR provision 52.204- 7. Therefore, prospective offerors are encouraged to register prior to the submittal of quotations/proposals. The guidelines for registration in SAM are also available at: https://www.statebuy.state.gov/pd/Pages/AdditionalVendorReg.aspx Furthermore, with the recent FAR update, it is now a mandatory requirement for the Government to inquire if contractors are using or will be using, in government contracting, covered telecommunications equipment produced by Huawei, ZTE, Hikvision, Dahua, and Hytera, or their subsidiaries or affiliates. Consequently, vendors are required to update their SAM registration with that information. Potential offerors are advised to take special attention to clauses FAR 52.204-24, FAR 52.204-25 and FAR 52.204-26 while completing their registration in SAM. The preferable means of contact for this request for quotation is via electronic mail to the Contracting Officer: NouakchottGSOSolicitations@state.gov . You will need to check this website periodically for updates. Thank you in advance for your interest in cooperation with the US Government. -- 2 of 11 -- Model #1 70 SERIES • MODELS 7012 Discharge size - 1¼" NPT Seals - dual mechanical carbon/ceramic upper carbon/silicon carbide lower Moisture detection system Construction - Cast iron ASTM A-48 Class 30 30,000# tensile strength, protected with a corrosion resistant baked epoxy powder coating Attaching hardware - 304 stainless steel O-ring seals - Viton Impeller - Bronze vortex design High head model • 2.5 KW 2800 RPM • 3 Phase - 380 Volt • Stator - Class F insulation and lead wires Nema B design • Thermal with leads • Housing - Cast iron oil-filled • Ball bearings - Upper and lower high carbon chromium steel IMPELLER TYPE: BRONZE VORT X TANDEM SEALS: S ANDARD CUTTER & PLATE: SS HARDENED TO 55-60 ROCKWELL MOTOR DESIGN LETTER: NEMA B (3 Ph) PUMP NET WEIGHT: 132 bs. (60 Kg) POWER CORD LENGTH: ft (m) (20' STANDARD)  25'  35'  50' (7.6 m) (10.7 m) (15.2 m) O-RINGS: VITON MOTOR SHAFT: 416 SS POWER CORD: 14 AWG SOW / CE PUMP - H07RN- F4G1.5 RPM: 2800 STATOR & LEAD WIRES INSULATION: CLASS F MOTOR TYPE: SUBMERSIBLE MAXIMUM STATOR TEMPERATURE: 311°F (155°C) SHAFT SEAL CONSTRUCTION: STAND ARD CARBON/CERAMIC UPPER CARBON/SILICON CARBIDE LOWER OPTIONAL  CARBON /SILICON CARBIDE  SILICON MODELS: 7012 CONFIGURATION: HIGH HEAD SERVICE FACTOR: 1.2 NEC LOCKED ROTOR CODE: G MAXIMUM KW INPUT: 2.5 STANDARD IMPELLER DIAMETER: 6.125" DISCHARGE SIZE: 1.25" NPT -- 3 of 11 -- UPPER CARBIDE/SILICON CARBIDE OPTIONAL LOWER  SILICON CARBIDE/SILICON CARBIDE STANDARD SENSING DEVICES* MOTOR THERMAL SHUTOFF MOISTURE DETECTION THERMAL CUT-OUT (3 PH) MOISTURE SENSING PROBES IMPELLER TRIM - REVERSING MODELS ONLY:  OPTIONAL DESIGN POINT: GPM @ ' TDH, IMPELLER DIA. " DESIGN POINT: LPM @ M, IMPELLER DIA. mm MAXIMUM WATER TEMPERATURE: 104°F (40°C) MOD EL SER VIC E FAC TOR 380V / 3 PH FL A LR A 7011 1.2 4.4 18 7012 1.2 4.4 18 7013 1.2 4.4 18 Model #2 70 SERIES • MODELS 7012 440 stainless steel cutter and plate hardened to Rockwell C55-60 Discharge size - 1¼" NPT Seals - dual mechanical carbon/ceramic upper carbon/silicon carbide lower Moisture detection system Construction - Cast iron ASTM A-48 Class 30 30,000# tensile strength, protected with a corrosion resistant baked epoxy powder coating Attaching hardware - 304 stainless steel O-ring seals - Viton …