Selective Laser Sintering Three-Dimensional Additive Manufacturing Machine

SOLICITATION NO. N00173-26-R-TJ03 Page 1 of 15 Amendment 0001 (A0001) to N0017326RTJ03 is hereby issued to accomplish the following: 1. Provide responses to questions received 2. All other terms and conditions Combined Synopsis Solicitation N0017326RTJ03 remain unchanged. ____________________________________________________________________________________________ COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation documents and incorporated provisions are those in effect through Federal Acquisition Circular 2025-04, DPN 20250521, and NMCARS 18-22. SECTION 1- GENERAL INFORMATION Solicitation Type Request for Proposal, FAR Subpart 13.5 Solicitation Number N00173-26-R-TJ03 Posted Date 16 June 2026 Response Date / Time 30 days after Posted Date NAICS Code 333248 Size Standard 750 employees Product or Service Code 3695 Set-Aside N/A Contract Type Firm Fixed-Price (FFP) Point(s) of Contact Tamara Jenkins, tamara.n.jenkins.civ@us.navy.mil All changes to this solicitation that occur prior to the closing date will be issued via amendment posted to the announcement on Contract Opportunities (www.sam.gov). It is the responsibility of interested vendors to monitor the announcement for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. Questions must be submitted to the Point(s) of Contact listed above no later than three (3) days after the Posted Date. SECTION 2- REQUIREMENT INFORMATION The Naval Research Lab (NRL) in Washington, DC has a new requirement for the procurement of a commercial Selective Laser Sintering Three-Dimensional Additive Manufacturing Machine. The anticipated line item structure as follows is based on the items outlined in Attachment 1- Requirements for Selective Laser Sintering Three-Dimensional Additive Manufacturing Machine: Item Schedule of Supplies/Services Quantity Unit Unit Price Amount 0001 Selective Laser Sintering Three-Dimensional Additive Manufacturing System Lot $ $ -- 1 of 15 -- SOLICITATION NO. N00173-26-R-TJ03 Page 2 of 15 Item Schedule of Supplies/Services Quantity Unit Unit Price Amount 0002 Installation Lot $ $ 0003 Warranty Lot $ $ TOTAL PRICE $ $ In accordance with FAR 52.204-22, alternative line items structures that best reflect the Offeror’s practices and proposed items may be submitted. SECTION 3- DOCUMENTATION The vendor must supply one complete printed set of the following manuals with the system upon delivery:  System Operations Instruction Manual including basic functions, print settings, material loading,  and maintenance procedures  Processing Software Instruction Manual  Slicing Software Instruction Manual  Spare Parts Manual  Material Compatibility Manual  Maintenance Manual  Troubleshooting Manual SECTION 4- DELIVERY AND PLACE OF PERFORMANCE Required Delivery Date 60 days after award Delivery Location Receiving Officer Contract Number: TBD ATTN: TBD CODE: TBD LOCATION: Naval Research Laboratory, LASR Facility B271 4555 Overlook Ave. SW 20375 Inspection / Acceptance Destination - All items delivered under this action will be inspected/accepted by the Government within thirty (30) days of delivery. FOB Point Destination, Free of expense to the Government, in accordance with FAR 52.247-34 DPAS N/A FAR 52.212-1, Instructions To Offerors— Commercial Products And Commercial Services (SEP 2023) - AND ADDENDA TO FAR 52.212-1 applies to this acquisition. -- 2 of 15 -- SOLICITATION NO. N00173-26-R-TJ03 Page 3 of 15 FAR 52.212-1 has been tailored to include the following additional instructions SECTION 5- SUBMISSION INFORMATION (a) Submission: Quotations shall be submitted electronically via email to the Point(s) of Contact by the Response Date/Time identified in the General Information Section above. A confirmation of receipt will be provided, but it is the sole responsibility of the Offeror to ensure that its response is received in its entirety and in a timely manner. (b) Requirements: Offerors shall provide a quote with their proposed products and pricing, along with product literature for the items being offered so that compliance with the specifications can be evaluated. This procurement is for NEW EQUIPMENT ONLY. No remanufactured or "gray market" items are acceptable. All equipment must be covered by the manufacturer's warranty. The quote shall also include: 1. To support the Government's determination of fair and reasonable pricing, as well as the potential for future advancing of the current technology to meet all requirements, the Government requests a breakdown of costs for equipment, installation, training, testing and warranty that are priced as separate line items. 2. Description of standard commercial warranty and any extended warranty (if not described in the Offeror’s standard terms and conditions). 3. Letter of Authorization – If providing the products/items of another manufacturer as an Authorized Reseller/Partner, the Offeror shall include documentation from the manufacturer illustrating that the Offeror is an Authorized Reseller/Partner. 4. If shipping is not priced as a separate line item, a statement that shipping is included in the overall price of the items. (c) Company Information: The Offeror shall ensure the following information is submitted:  Company Name  Address  CAGE  Unique Entity ID  Website URL  Company point of contact, phone # and email (d) System for Award Management (SAM): Offerors must be registered in SAM (www.sam.gov) in orde…