Thermtest MP-1 Upgrade

STATEMENT OF WORK 1. Objective/Requirements This requirement is for the acquisition of the Thermtest Upgrade for NASA Langley Research Center (LaRC). The information listed below is required to complete this purchase. 2. Characteristics, Scope, and Specs QTY PART # DESCRIPTION 1 30001P001-00 Measurement Platform 1 (MP-1) Next generation instrument, designed for measurement of thermophysical properties, the MP-1 offers multiple sensor and temperature options depending on your sample type. Central design is for the use of primary purpose sensors to maximize accuracy and sample type flexibility. The expandable platform allows auto-switching between sensors and temperature devices for testing multiple samples at the same time. Specifications: High sensitivity controller, with Wheatstone Bridge Touch-screen with testing status Built in 4-channel sensor switch: 1-Room temperature sensor channel 3-Multi-type channels for sensors or temperature devices Windows MP-1 software packages; Testing and Analysis Testing. Full control of testing and temperature. Analysis. Smart results processing and report functions. *Requires Windows 10 computer Online Training and Support from Thermtest Service Engineer 1 year Warranty Methods Available: 1. Transient Plane Source (TPS) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat of solids, -- 1 of 10 -- pastes & powders from 0.005 to 1800 W/mK. ISO 22007-2 2. Transient Hot Wire (THW) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat of liquids, pastes & powders from 0.01 to 2 W/mK. ASTM D7896 3. Transient Line Source (TLS) Method for testing the thermal conductivity of soil, plastics, soft and rigid materials from 0.1 to 8 W/mK. ASTM D5334-22a, ASTM D5930- 17, IEEE 412-2017 4. Transient Hot Strip (THS) testing the absolute thermal conductivity, thermal diffusivity, specific heat of solids from 0.1 to 500 W/mK. Includes: MP-1 Controller - 1 20 VAC (60 Hz) 1 A or 230 VAC (50 Hz, 60 Hz) 1 A - 4 32 mm [17 in] x 610 mm [24 in], 20.34 kg [44.83 lbs] USB Key with DAQ, TA Software Applications, License Information, Manuals Protective Mat USB Cable Power Cable 1 Year Warranty 1 30003P001-00 Transient Plane Source (TPS) Method Transient Plane Source (TPS) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat, thermal effusivity of solids, pastes & powders from 0.005 to 1800 W/mK. ISO 22007-2 Specifications: Materials: Solids, Pastes, Powders and Viscous Liquids Accuracy: 5% Repeatability: 2% Sample Configuration: Symmetric and Asymmetric Temperature: Room Temperature -- 2 of 10 -- Expanded Temperatures with Temperature Platforms: TPS-TP-1: 0 to 300C TPS-TP-2: -20 to 300C TPS-TP-3: -45 to 300C TPS-TP-4: -160 to 300C Expanded (Furnace): up to 750C / 1000C Sensor Contact Resistance: Measured, m^2K/W *Thermal Conductivity : 0.005 to 1800 W/mK Additional properties: Thermal Diffusivity, Volumetric Specific Heat, Thermal Effusivity and Sensor - Sample Contact Resistance Test Time (s): 0.25 to 1280 Seconds Data-Point Collection (points): 400 to 600 *Sample Size: 5 x 5 mm to unlimited *Sample Thickness: 0.001 mm to unlimited Sample Configuration: Symmetric (Double- Sided) and Asymmetric (Single-Sided) Standard: ISO 22007-2 *Based on testing module used. TPS Testing Module Groups Three-Dimensional TPS Module Group: 1. Standard - bulk, three dimensional thermophysical properties (0.01 to 1000 W/mK). Included. 2. Anisotropic, directional (axial and radial) thermophysical properties (0.005 to 500 W/mK). Optional. 3. Slab (avg radial), thermophysical properties of thermally conductive sheets (0.1 to 1800 W/mK) Optional. 4. Specific Heat, direct measurement. Optional. 5. Thin-Film and Coatings (0.01 to 1 mm, 0.01 to 1 W/mK). Optional. One-Dimensional TPS Module Group: 1. Standard - 1D (0.1 to 1800 W/mK). Optional. -- 3 of 10 -- 2. Thermal Resistance Thin-film and coatings (0.001 mm to 1 mm, 0.005 to 5 W/mK). Optional. 3. Transient Thermal Resistance - Contact Resistance (TR-CR), for measuring thermal contact resistance between two objects. Optional Includes: TPS Standard - Bulk Module for measurement of low to high thermal conductivity materials. Thermal Conductivity: 0.01 to 1000 W/mK Additional properties: Thermal Diffusivity, Volumetric Specific Heat, Thermal Effusivity and Sensor - Sample Contact Resistance Accuracy: 5% Repeatability: 2% Smallest Sample: 5 x 5 x 1 mm Largest Sample: unlimited Stainless Steel 304 Verification Material One (x1) TPS Sensor (6.4 mm radius) -Several radii available based on sample size (0.5 to 30 mm). XPS Insulation for Asymmetric Testing Room Temperature Sensor Adaptor -Can be upgraded to TPS High Temperature Sensor Adaptor (300C) for use in standard furnace. TPS Sample Holder with Cover: sample size up to 100 x 100 x 50 mm 1 30003P002-00 TPS 3D Anisotropy The Anisotropy Module allows you to measure axial and radial thermal conductivity - thermal diffusivity of anisotropic materials. Specifications TC: 0.005 - 500 W/mK in both axial and radial direction to the sensor plane Additional properties: Thermal Diffusivity- Sample Contact Resistance Cp: Specific Heat Required (it is easily found with the Specific Heat Capacity Module) -- 4 of 10 -- Accuracy: 5% Repeatability: 2% Smallest Sample: 10 x 10 x 1 mm Largest Sample: unlimited 1 30003P003-00 TPS 3D Slab The Slab Module is suitable for measurements on low to extremely high conducting materials such as stainless steel, carbon steel, aluminum, copper, silicon wafers, etc. Specifications TC: 0.1 - 1800 W/mK Additional Properties: Thermal Diffusivity and Volumetric Specific Heat Accuracy: 5% Repeatability: 2% Smallest Sample: 15 x 15 x 0.06 mm Largest Sample: unlimited 1 30003P015-00-DNU MP-1 with TPS: Slab Anisotropic Module The Slab - Anisotropic Module allows measurement of axial and radial thermal conductivity - thermal diffusivity and volumetric specific heat of shee…