Zeiss Contura machine (CMM) Hardware and Retrofit Services

STATEMENT OF WORK 1. Objective/Requirements The Marshall Space Flight Center (MSFC) requires the procurement of ES23 Zeiss Contura 12/18/8 coordinate measuring machine (CMM) Hardware and Retrofit Services. 2. Characteristics, Scope, and Specs Part Number Description Quantity SN: 732301560593 CONTURA 12/18/8 system with a RDS-D8-CAA with DotScan 3mm sensor to enhance measurement capability and long-term performance 1 Scope of work:  Installation of the RDS-D8-CAA with DotScan 3mm sensor and associated components  Verify installation and operation of DotScan  Perform and Accredited Basic Service Sensors: Part Number Description Quantity 620670-9181-000 Articulating-Probe-Holder RDS-D8 CAA -se RDS-D8 CAA Articulating Sensor Holder - articulates in 2.5 degree increments in X, Y or Z - 20,732 possible measurement positions - supports VAST XXT, LineScan, ViScan & DotScan sensors - minimum calibration time using CAA technique 1 600332-8476-000 Reference sphere, RS-DK30-C CFS Reference sphere with shaft RS-DK30-C for RSH-Systems 1 600781-9421-000 Option white light sensor DotScan 3mm 600781-9421-000 DotScan sensor with 3mm measuring range. 1 600781-9431-000 Option white light sensor DotScan 1mm 600781-9431-000 DotScan sensor with 1mm measuring range. 1 600781-9411-000 Option white light sensor DotScan 10mm 600781-9411-000 DotScan sensor with 10mm measuring range. 1 Accessories: Part Number Description Quantity 620675-8060-000 Holder with LWL centerpiece Holder with LWL centerpiece 1 000000-0580-337 One-Click Cleaner SC-CLK-B /FUJIKURA One-click cleaner SC-CLK-B Fujikura Cleans dust from the optical coupling of the fiber optic cable 1 -- 1 of 3 -- 621770-8050-000 probe socket RDS CFS DotScan compatible RDS probe socket includes automatic cable disconnect for disconnecting from RDS under CNC control. 1 600781-0113-000 auxiliary tool, DotScan 600781-0113-000 Tool for manual exchange of DotScan, enables release of optical interface during manual exchange of DotScan on RDS. 1 Spare parts and Consumables: Part number Description Quantity 000000-0702-192 Controller IFC2421 with Zeiss Firmware Controller IFC2421 with Zeiss Firmware 1 600781-8423-000 Optical waveguide compl. E2000-F3000 Optical waveguide compl. E2000-F3000 1 600781-8413-000 Optical waveguide compl.E2000-F3000 2,7m Optical waveguide compl.E2000-F3000 2,7m 1 000000-0408-483 ISO 4762-M6x20-8.8-zinced blue kISO 4762-M 6 x20 -8.8 zinc. 2 000000-0214-094 DIN 125-A6,4-A2 DIN 125-A 6,4-A2 2 000000-1755-943 Hardware Retrofit Hardware Retrofit Identifier (not a physical part) 1 000000-2196-804 Accrdtd 10360 Basic - CONTURA Z=800/1000 Accredited ISO 10360 Basic Calibration - CONTURA Z=800, 1000 1 622510-0421-000 DIN rail lenght=200mm DIN rail lenght=200mm 1 620803-8333-001 Cable integration CFS X800, PRISMO Cable integration CFS X800, PRISMO 1 000000-0540-495 Patch Cable UTP RJ45 CAT6 0.5m red Patch cable RJ45 CAT6A 8St/St L=0.5m red 1 000000-0453-301 ISO 4032-M6-A2-70 ISO 4032-M6-A2-70 2 000000-2264-148 INSTALL; SENSOR RETROFIT INSTALL; SENSOR RETROFIT (per day) 3 Installation supervision services shall include the following: • Direction of general labor/trades in the unpacking and delivery of machine to location • Direction of general labor/trades in the assembly of machine • Direction of general labor in hook up of required utilities • Cable and level machine • Perform electronic and mechanical adjustments as required to meet specifications • Run standard Zeiss calibration and accuracy tests in accordance with machine specifications -- 2 of 3 -- 3. Place of Performance Marshall Space Flight Center (MSFC) Building # 4487, Room # W106 HUNTSVILLE AL 35812 4. Period of Performance 12 weeks ARO. -- 3 of 3 --