OBL-WN/SCARS 4th Floor Furniture

01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 03 December 2025 Furniture Statement of Work Date: 03/31/2026 Facility# OBL Springboro Pk 9595 Springboro Pk Dayton, OH 45449 OBL Springboro Furniture 2025TP096 ID Project #: 2025TP096 Tina Penick Interior Design Specialist Wright Patterson AFB CEG-Interior Design Specialist 5151 Wright Ave, Building 11 WPAFB, OH 45433-5339 937-656-3452 -- 1 of 27 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 03 December 2025 Revision History Author Name Date Reason For Changes Version Tina Penick 05/19/2026 Updated F1a and F1b 1 -- 2 of 27 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 03 December 2025 1.0 Scope This project will be awarded on a competitive basis using total project cost. • The Contractor shall provide all supervision, labor, materials, equipment, and when applicable Certified Electrician to hook up the Systems Furniture to Building power, including transportation to accomplish this project in accordance with this Statement of Work (SOW), project drawings. • The Contractor shall provide 30 days storage, and the requirements contained in the soliciting documents. • The Contractor shall provide NO removal of existing furniture as stated in detail in Section 7.2 Removal of Existing Furniture. • The Contractor shall include an itemized quote that includes labor to receive, inspect, deliver to project job site, and install product per approved final design layout. • The Contractor may include AutoCAD design hours for all phases of design (initial, revisions and final). • The Contractor may include design hours for in person meetings to review all phases of design (initial, revisions and final), finish selections, site visits (field measurement), and any other means and methods for the contractor to execute the project. • Reference section 2.2.11 for updated power harness requirements per UFC 3-520-01 (Change 2, 12 April 2021). • For this project provide Power Poles for the workstations. A certified electrician shall provide hardwire connection complete from the workstations to building power. Provide break box labeling for new and/or altered circuit. • For this project repair/replace flooring and ceiling, where applicable if damaged upon furniture installation of project. All patch and repair should be consistent finish level of the existing wall with no paint lines visible from patch. • For this project remove/patch-repair old signage and installation of new signage in accordance with this Statement of Work. All patch and repair should be consistent finish level of the existing wall with no paint lines visible from patch. • The Contractor shall provide overall 2D Floor Plan and 3D Image of each typical. Site Visit Scheduled: To Occur 1 week after Soliciation Posting if requested For this project we require the following product types: Systems Furniture, Casegoods, Seating, Tables, Signage Please note: Each office/space shall be of the same manufacturer to keep finishes consistent within spaces. Minimum Technical Requirements PRODUCT –Basis of Design- TAG/TYPICAL DESCRIPTION QTY -- 3 of 27 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 03 December 2025 PO1 TYPICAL PO1-C U Shape Workstation, Freestanding Casegoods Modular Furniture, Laminate, Freestanding , Storage, Mobile Pedestal, Lateral File, Single Wardrobe, Long Tab Pull Type, Grommets, Locking, Handed per Drawing 1 - DESK - 1- WS1 - WORKSURFACE, Rectangular, Laminate Top, 84X36, grommet per drawing, 3/4 Metal or Laminate Modesty with Knee Space and Suspended, 30" Fixed Height, Open End Panel/End Panel, Grommet (L) 1 - WS2 - WORKSURFACE, Rectangular Laminate Shell Top 72X24, Freestanding, Metal or Laminate Full/Partial End Panels, 30" Fixed Height, 10" Modesty Metal (allowing wall access to power), 3 Grommets (L,R, and Center) 1- WM- Wire Cable Management (min 24"wide, flame retardant mesh basket, velcro ties to secure cables, 1 fixed side with 1 removable side for access, supports min 10lbs, finish offered in black and silver/gray) 1 - PED, Fixed, 24"D, Box, Box, File and Rails, 1 - WS3 - WORKSURFACE, Rectangular Laminate Shell Top 72X18, Freestanding, Metal or Laminate Full/Partial End Panels, 30" Fixed Height, 10" Modesty Metal (allowing wall access to power), 1 Grommets (R) 1 - LF2 - LATERAL FILE, 36", 2H, Under Worksurface, Fixed, 18"D, File, File and Rails Metal or Laminate Case 1 - LF2 Combo - LATERAL FILE, 36", 2H, Under Worksurface, Fixed, 18"D, B/B-F/Lat and Rails, Metal or Laminate Case 1- 72" Hutch Storage - Metal Case, Laminate Door, no center support on worksurface, Long Tab Pull, Locking, Freestanding NO WALL MOUNT 2-HTC36-OVERHEAD DOOR STORAGE, 13"D, Laminate Hinge Door 1-GB60-MAGNETIC WHITEBOARD, 72x24"H (+/-), White -LT- LED Task Light, 11 ft cord 1 - Open Shelving- 24"x13", Same Height as Hutch, Freestanding NO WALL MOUNT 1-Shelf - 24", laminate 1-TCKB-TACKBOARD, 24x24"H(+/-), Upholstered, GrB 1 - LK1 - LOCKER/WARDROBE - Single Door, 18"x18"(9+/-), 5 High, Laminate or Metal Case, Wardrobe Tower, RIGHT or LEFT Handed, Freestanding. Match Height of Hutch, Laminate Wardrobe Door Storage with Clothes Rod and Shelf 1 - LF4 - LATERAL FILE, 36", 4H, Freestanding, 18"D, File, File and Rails Metal or Laminate Case 1 - PSS - POWER SURGE STRIP, 24", 8 outlets per strip, 6ft cord, plug in while installing (request comm lines from customer as well before desk is pushed back in place) 1 -- 4 of 27 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 03 December 2025 FINISHES: Laminate- standard (Smoked Oak), Edge- standard, Panel Upholstery- GR A (Tangle-Spangle),Metal- standard (Sand), Pull - horizontal thin edge top (Sepia Bronze) PO2 TYPICAL PO2-D U Shape Workstation, Freestanding Casegoods Modular Furniture, Laminate, Freestanding , Storage, Mobile Pedestal, Lateral File, Single …