Sources Sought 759 nm Butterfly-packaged Lasers and Laser Amplifiers

Requirements / Specification Document Requirements / Specifications: 759 nm Butterfly-packaged Lasers and Laser Amplifiers 1 Version 1.0 (2019) Double-click on  for further assistance. Use this document to detail specifications/requirements for an item and/or ancillary services.  TITLE: 759 nm Butterfly-packaged Lasers and Laser Amplifiers  Requesting Lab/Division/Group: Physical Measurements Lab/Time and Frequency Division/Neutral Atom Optical Clocks Group NB688000-26-02448 General Statement of Need  The Neutral Atom Optical Clocks Group at NIST requires a compact, single-mode, butterfly- packaged semiconductor lasers and laser amplifiers operating at 759 nm. Items and/or Ancillary Services  Item 1: Semiconductor Laser Amplifier and Evaluation Board Mount Quantity: Two (2) Specifications: 1.1 - Laser power amplifier at 759.35 nm. 1.2 - Polarization maintaining fiber-coupled input, APC connectorized. 1.3 - Free-space, collimated output. 1.4 - Output power of >=1.5 W for an input power of <= 10 mW. 1.5 - Packaged in standard 14-pin butterfly package. 1.6 - Integrated thermoelectric cooler and thermistor 1.7 - Evaluation board mount with thermal heat sink and electrical connections for Arroyo 6340 laser controller Separately Priced Options and Services: Item 2: Compact Semiconductor External Cavity Diode Laser Quantity: Three (3) Specifications: 1.1 - External Cavity diode laser at 759.35 nm. 1.2 - Total laser system must be packaged in standard 14 pin hermetically-sealed butterfly package. 1.3 - Polarization maintaining fiber-coupled output, APC connector. 1.4 - Mode-hop free tuning range >10 GHz. 1.5 - Coarse tuning range of 1 nm or more. 1.6 - Laser linewidth < 150 kHz. 1.7 - Output power 10 mW or more (fiber-coupled). 1.8 - Laser package includes integrated optical isolators with >50 dB isolation. 1.9 - Integrated thermoelectric cooler and thermistor Item 3: Compact Single-Frequency Distributed Feedback Laser Quantity: One (1) Specifications: 1.1 Distributed feedback (DFB) laser at 759.35 nm. 1.2 Packaged in a standard 14 pin hermetically-sealed butterfly package. 1.3 Polarization maintaining fiber-coupled output, APC connector. 1.4 Output power >=12 mW 1.5 Laser linewidth <= 2 MHz 1.6 Includes integrated thermoelectric cooler and thermistor. -- 1 of 4 -- Requirements / Specification Document Requirements / Specifications: 759 nm Butterfly-packaged Lasers and Laser Amplifiers 2 Version 1.0 (2019) Double-click on  for further assistance. Service Requirements / Item Specifications Section  Requirements/Specifications  Planning Considerations ☒ N/A ☐ List any visits required to allow potential vendors to see site specific constraints. [Explain requirement here] ☐ US citizen required on-site (foreign nationals require preregistration 30 days prior) ☐ Vendor rep on-site more than three days ☐ Other considerations: [List other considerations to ensure an accurate quote] Shipping & Delivery ☒ N/A [Enter shipping and delivery information by item here.] Shipping criteria: ☐ Partial delivery acceptable ☐ Direct delivery to building required [Explain need for requirement here] Building has: ☐ Loading dock ☐ Containerization preference: [Choose container] Other requirements: [List any other requirements here] Delivery date criteria: ☒ Delivery of goods, installation, and training shall be completed no later than: 16-18 weeks ARO ☐ Deliver no earlier than: [Insert date here] ☐ Other: [List other shipping, delivery, or specil requirements] Electronic Media ☒ N/A [Enter electronic media requirements by item here.] ☐ Software ☐ Electronic manuals ☐ License Key ☐ Other: [List any other Electronic Media requirements here] [Enter email address for software delivery here] Installation ☒ N/A [Enter installation requirements by item here.] ☐ Vendor technician on site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of packaging material ☐ Equipment set up ☐ Start-up services ☐ Turn key installation ☐ Other [Enter details here.] Note: When installation is required, TPOC or COR shall be the coordination point. Facility / Utility Considerations ☒ N/A [List site specific utility considerations by item here.] ☐ OFPM Work Order Number(s) [List any Work Order Number(s) here] ☐ Power available Voltage: [Enter voltage here] (V) Max Current: [Enter max current draw here] (A) -- 2 of 4 -- Requirements / Specification Document Requirements / Specifications: 759 nm Butterfly-packaged Lasers and Laser Amplifiers 3 Version 1.0 (2019) Double-click on  for further assistance. Phase: [Choose phase] Frequency: [Typically 60Hz] (Hz) NEMA Plug Type: [Enter plug type here] (i.e.: NEMA L5-20P) Environment: [Choose environment] Other power consideration: [List any other power considerations here] ☐ Utility connections: [List relevant available utilities, pressure(s), and flowrate(s)] ☐ Other considerations: [List other considerations to ensure an accurate quote] Warranty  ☐ N/A Base Manufacturer Warranty is acceptable [If you require an Extended Manufacturer Warranty, describe the warranty requirements per item here.] What is included? ☐ Labor ☐ Parts ☐ Travel ☐ Cost and liability for returns ☐ Other: [Enter other requirements here] ☐ Warranty length: [Enter warranty length here] Period Length:[Ex. month, 6 month, year etc.] Training ☒ N/A [Training requirements (who, when, what, where) here. If on-site, is travel necessary?] ☐ On-site ☐ Off-site location: [Enter location(s) here] ☐ Number of trainees: [Enter number of trainees here] Scope of training: ☐ Operations ☐ Maintenance ☐ Troubleshooting ☐ Safety ☐ Other: [Enter other scope requirements here] ☐ Training materials to be provided: [Describe requirement here] ☐ Other: [Enter other training requirements here] Note: When training is required, TPOC or COR shall be the coordination point. Inspection and Acceptance ☐ N/A [Enter inspection requirements per item here] ☐ Planned government acceptance testing (7 business days) ☒ Gov’t acceptance expected to t…