TWIST LOCK AND CASTERS

DLA MARITIME NORFOLK – CONTRACTING DIVISON PORTSMOUTH, VA 23709-5000 This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Part 13 using Simplified Acquisition Procedures (SAP). This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. RFQ NUMBER: SPMYM126Q4100 BUYER: SHEREE MCDONNELL EMAIL ADDRESS: SHEREE.MCDONNELL@DLA.ML This solicitation documents and incorporates provisions and clauses in effect though FAC 2024-02 and the DFARS Change notice 01/22/2024. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this website: https://www.acquisition.gov/. NNSY - Norfolk Naval Shipyard requests responses from qualified sources capable of providing the material that is referenced below. All items shall be new. No refurbished or used items will be accepted. This solicitation is OTHER THAN FULL AND OPEN COMPETITION. REQUIREMENT DESCRIPTION TABLE CLIN NUMBER DESCRIPTION QUANTITY UNIT PRICE TOTAL 0001-61530201 MYTEE SHIPPING CONTAINER MANUAL TWIST LOCK (LEFT/RIGHT HAND LOCKING) LOCKING 500 EA $ $ 0002-61530202 MYTEE SHIPPING CONTAINER DUAL CASTER WHEELS - 11000 LBS WL 4 EA 0003-61530203 MYTEE 21.3" RUGGED DUAL CASTER WHEELS W/TWIST LOCK FOR SHIPPING CONTAINERS· RUBBER, 4000 LBS WLL 4 EA TECHNICAL ORDERING DATA Document: 61530201 - MYTEE Shipping Container Manual Twist Lock (Left/Right Hand Locking) Locking Product: Shipping Container Manual Twist Lock Applicable Standard: Designed for Standard ISO 1161 Corner Castings Material: High-Quality Cast Steel Housing (typically ZG45 or Cr40) with a Forged Steel Core Surface Treatment: Hot-Dip Galvanized / Shot Blasted (for weather and seawater resistance) Unit Weight: Approximately 9.2 lbs to 13.5 lbs (4.2 kg to 6.1 kg) depending on design/seat size Minimum Breaking Load (MBL) - Tension: 500 kN (􀁏 50 Tons) Minimum Breaking Load (MBL) - Shear: 420 kN (􀁏 42 Tons) Minimum Breaking Load (MBL) - Compression: 2000 kN (􀁏 200 Tons) MYTEE Shipping Container Manual Twist Lock (Left/Right Hand Locking) Locking or equivalent TECHNICAL ORDERING DATA Document: 61530202 - MYTEE Shipping Container Dual Caster Wheels - 11000 lbs WLL Product: Shipping Container Dual Caster Wheels Frame and Swivel Plate: Heavy-gauge, structural cast steel housing with industrial-grade Gray protective powder coating. Wheel Core Construction: Solid Forged Steel Core to eliminate deformation under continuous static loads. Tread Outer Layer: High-density, heavy-duty Nylon tread designed to reduce rolling resistance and eliminate "flatspotting"when parked. Swivel Bearings: Dual-ball race design equipped with integrated grease zerk fittings to allow field-level lubrication. Safety Brakes: Integrated foot-pedal Lock brakes on the dual-wheel configuration to prevent rolling or shifting when parked. Coupling Mechanism: Built-in standard twist-Lock assembly that inserts and twists directly into standard ISO 1161 container corner castings. Working Load Limit (WLL) - Single Unit: 11,000 lbs (5 Tons) Working Load Limit (WLL) - System (Set of 4): 44,000 lbs (20 Tons) Rotation Capacity: 360-Degree Swivel Radius Overall Assembly Height: 15-3/4 Inches (approx. 400 mm) Wheel Diameter: 7-17 /20 Inches ( approx. 200 mm) Individual Wheel Tread Width: 3 Inches (approx. 75 mm) Unit Weight (per caster): 137.00 lbs (approx. 62 kg) Bundle Standard Weight (4-Pack): 548.00 lbs (approx. 248.5 kg) MYTEE Shipping Container Dual Caster Wheels - 11000 lbs WLL or equivalent TECHNICAL ORDERING DATA Document: 61530203 - MYTEE 21.3" Rugged Dual Caster Wheels w/Twist Lock for Shipping Containers - Rubber, 4000 Lbs WLL Product: Shipping Container Dual Caster Wheels Frame & Housing: Heavy-gauge structural plate steel finished in a high-visibility, corrosion-resistant Safety Yellow powder coat. Tire Material: Solid Rubber Tires molded onto steel rims. Maneuverability Optimization: Dual-Wheel Configuration paired with one (1) extra small central support wheel to stabilize the assembly, reduce friction, and simplify manual steering or low-speed towing. Swivel Bearings: Sealed, heavy-duty industrial swivel bearing with integrated grease fittings to allow field-level maintenance. Working Load Limit (WLL) - Single Unit: 4,000 lbs (1.8 Tons). Working Load Limit (WLL) - System (Set of 4): 11,000 lbs (5 Tons) Rotation Capacity: 360-Degree Swivel Radius for multi-directional yard positioning. Overall Frame Height: 30 Inches (approx. 762 mm) Main Wheel Diameter: 21-3/10 Inches (21.3" / 541 mm) Combined Wheel Width: 6-3/10 lnches (6.3" / 160 mm) Overall Unit Weight: 285.00 lbs (approx. 129 kg) Coupling Type: Integrated standard twist-Iock assembly (locks directly into bottom apertures of ISO 1161 container corner castings) Ground Clearance: Outstanding ground clearance to roll over curbs, tracks, and site debris MYTEE 21.3" Rugged Dual Caster Wheels w/Twist Lock for Shipping Containers - Rubber, 4000 Lbs WLL or equivalent Name and address of Quoter Signature of person Date of quotation Title CAGE Code: SAM UIED# PHONE #: EMAIL ADDRESS: Important Information: Required Deliver Date (RDD): ASAP NAICS 332999. PSC 5340. Shipping term shall be FOB Destination System for Award Management (SAM). Quoting vendors must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://sam.gov/. Evaluation Factors and Required Documents: An award will be made based on BEST VALUE. All quotes will be evaluated for both technical acceptability and price reasonableness. Technical Acceptability: Each quote must clearly indicate the capability of the vender to meet all specifications and …