Enclosed Trailers with modifications

Sources Sought/Request for Information The Drug Enforcement Administration (DEA) is conducting market research to determine sources available for: enclosed trailers. Interested vendors should respond to this source sought with a capabilities statement outlining recent/relevant experience and how they are able to meet the intent of this requirement. The Government is using this market research to determine availability of sources, so please be sure to include Name of Business, Government Points of Contact, Unique Entity ID (UEI), Cage Code (as applicable), business size type/socio-economic status as represented/registered in the System for Award Management (SAM), and (if applicable) GSA Schedule/Contract number. This market research and Sources Sought notice is not a solicitation announcement and will not constitute any commitment by the Government. A market survey is being conducted to gain knowledge of potential qualified sources to determine if they can effectively compete for award of a Blanket Purchase Agreement. All interested vendors must submit their capabilities packages addressing their interest and capability to provide the products stated below. Interested vendor must also detail how they intend to meet the minimum specifications for each trailer. TRAILER SPECIFICATIONS 6 X 10 Foot, Single Axle, Enclosed Trailer • 10’ body length with additional V-Front enclosure with extended tongue clearance not to exceed five (5) feet. • 6’ body width • Max size double rear doors with bolt on steel strap hinges and locking system • Single curbside entry door, right hand hinge with locking system, located at rear of V-Front, door opening 30” W x 69” H CLIN Supplies/Services Unit of Measure 0001 10’ Single Axle Enclosed Trailer - Exterior Color White Each 0002 10’ Dual Axel Enclosed Trailer - Exterior Color White Each 0003 10’ Single Axe Enclosed Trailer - Exterior Color Black Each 0004 10’ Dual Axel Enclosed Trailer - Exterior Color Black Each -- 1 of 5 -- • Two-piece A-Frame, rectangular steel tube main rails with crossmembers on 16” centers • 2000-pound side crank jack ram hoist with foot pad • Heavy duty rear corner post jacks – 3,000 lbs. capacity • 2 5/16” hitch ball top mount coupler, 18” platform height • D.O.T. compliant safety chain with slip hook • 3500-pound, 10 degree up Torflex (or equivalent) single axle, ‘K’ brake flange, E/Z lube • 5 bolt electro distribution coated silver mod wheel • Chassis fully undercoated with corrosion preventative compound (CPC) • 6’ inside ceiling height, 72 ¾” vertical post located on 16” centers • ¾” exterior grade DryMax decking, exterior surface undercoated, interior surface painted gray • Chemical resistant polyurethane spray on liner – applied to floor and lower 6” of sidewalls in front section of trailer, includes partition wall and front wall • Horizontal “E” track, locate 2 rows each on roadside and curbside walls (less side door), centered at 24” and 48” above floor. • Solid partition wall, same construction as interior, no door, located 6’4” from exterior rear • 1 each 6” Interior LED strip light 480 usable lumens (Whelen Strip-Lite™ series Super-LED® model# PSC0CDCR), Voltage: +12v Size: H=1.35”, W=11.50”, D=0.90 Amp Draw: 0.160 Amp Lens Color: Clear, located on the center of the ceiling in front compartment. • 12-volt interior wall switch for 6” Interior LED strip light, located in front compartment near the curbside door • 2 each 6” Interior LED strip light 480 usable lumens (Whelen Strip-Lite™ series Super-LED® model# PSC0CDCR), Voltage: +12v Size: H=1.35”, W=11.50”, D=0.90 Amp Draw: 0.160 Amp Lens Color: Clear, located on the center of the ceiling in rear compartment adequately spaced • 12-volt interior wall switch for 6” Interior LED strip light, located in the rear compartment near the rear door. • 2 each Micro Pioneer Light head with horizontal bail bracket (Whelen Micro Pioneer™ Model # MPBB), 45 watt +12v DC, Voltage: +12v DC Size: H=4.63”, W=4.76”, D=2.88” Amp Draw: Spot Light = 3.50 Amps Lens Color: Clear, located on the top corners of trailer, directly above the brake lights, facing rearward • 12-volt interior wall switch for Micro Pioneer Light head, located in the rear compartment of the trailer near the rear door • Traffic Advisor (Whelen Traffic Advisor™ model # TAM83), Voltage: +12v Size: H=1.74”, W=30.454”, D=2.17”, Amp Draw: 400 mA Peak, 160 mA Average per Light head, Lens Color: Clear, located on the top corners of trailer, directly above the rear doors, facing rearward • Dip Switch Programming for LED Traffic Advisors, located in front compartment near curbside door -- 2 of 5 -- • 4 each exterior Warning Light (Whelen ION Series Super-LED model# WIONSMB), Voltage: +12v Size: H=1.69”, W=5.91”, D=1.10”, Amp Draw: 1.0 Amps Peak, 0.40 Amps Average, Lens Color: Clear, located on the front and rear top corners of the trailer near amber light • 12-volt interior wall switch controller for exterior Warning Light, located in front compartment near the curbside door • The roof assembly shall consist of a one piece 0.030 white prefinished aluminum sheet with support bows on maximum 24-inch centers, with roof reinforcements that are bonded in place and constructed to ensure adequate drainage, • Interior sidewalls shall be ¾ smooth plywood installed vertically with non-corrosive mechanical fasteners • The exterior walls shall be .030 prefinished smooth aluminum white installed vertically with noncorrosive mechanical fasteners. • All roof and body seams shall be sealed and weatherproofed • Smooth aluminum fenders • Exterior spare tire mount, located on curbside wall, directly above the smooth aluminum fender • Spare tire and wheel, • 16” high aluminum tread plate stone guard with wrapped integrated corners, located on front end of trailer • Upper exterior flow thru sidewall vent located on the front compartment on the opposing side of the curbside entry door • Upper exterior flow thru s…