GLEN CANYON LATHE & MIL REPLACEMENT

Attachment: CUSTOMER SPECIFICATION Page 1 of 2 Lathe and Milling Machine & Msc Tooling Glen Canyon Field Division Lathe System (TRAK 1845RX or Equal) One (1) lathe system meeting or exceeding the capabilities of the TRAK 1845RX Lathe with ProtoTRAK RLX CNC, 10HP, 240V. Required Features/Components/Salient Characteristics: • AFO W/Verify RLX – Advanced Features with Verify • AUX OUT PTRLX – Auxiliary Output Module • CC 1845 – Collet Closer • CHUCK 8/D6 – 8" Chuck, D1 6 • CLPMP 1845RX – Coolant Pump • CONV CAM RLX – CAM File Out Converter • COV DXF RLX – DXF Converter • LAMP 1845RX – Work Light • LSO 1845RX – Limit Switch Option • P TRAK RSG – Remote Stop/Go Switch • PTRXOL – Offline Programming (RMX/RLX) • TRAKING – TRAKing Operation • USB MEM TRAK – 4.6GB USB Memory Drive Tooling for Lathe (ISCAR or Equal): Required Features/Components/Salient Characteristics: • 1 ea. Indexable turning toolholder clamp and screw 1 x 1” shank 6” OAL • 6 ea. Lathe tool post holder 14 to 17” lathe swing, 2 ½” OAH 3 ¾” OAL • 1 ea. Lathe tool post holder 71c carbide combination cut off holder 14 to 17” Lathe swing 2 ¼” OAH 3 ¾” OAL • 1 ea. Double end neutral indexable cutoff blade 31.9mm high x 0.1447” wide x 150mm OAL • 1 ea. Indexable boring bar 23.62mm min bore right hand 19.05mm shank Dia -5 deg lead steel 254.00mm OAL screw • 1 ea. Indexable boring bar 19.56mm min bore right hand 15.88mm shank Dia -5 deg lead steel 254.00mm OAL screw • 1 ea. Indexable boring bar 30.48mm min bore right hand 25.40mmshank Dia -5 deg lead steel 304.80mm OAL clamp • 1 ea. Indexable boring bar 12.19mm min bore right hand 9.53mm shank Dia -5 lead steel 152.40mm OAL screw • 1 ea. Indexable boring bar 15.24mm min bore right hand 12.70mm shank Dia -5 deg lead steel 203.20mm OAL screw • 1 ea. Indexable turning toolholder screw ¾” x ¾” shank 4 ½” OAL • 1 ea. Drill chuck 3/64 to ½” capacity integral shank mount 4MT keyless taper shank 1 7/8” sleeve Dia • 10 ea. Turning insert carbide coated finish neutral 0.5079” long 0.5000” inscribed circle 0.0313” corner radius 80deg diamond (Rhombic) 80 deg series CN -- 1 of 2 -- Attachment: CUSTOMER SPECIFICATION Page 2 of 2 • 10 ea. Cutoff insert carbide 4.00mm cutting width 0.1575” cutting width 0 deg neutral lead angle • 10 ea. Turning insert coated finish, neutral 0.2520” long inscribed circle 0.0156” corner radius 80 deg • 10 ea. Turning insert AC 250 carbide Tiain & ALCrN finish neutral 0.3189” long 0.3750” inscribed circle 0.0078” corner radius 80 deg C diamond (Rhombic) 80 deg Milling Machine System (TRAK K3KMX 3 or Equal) One (1) milling machine meeting or exceeding the capabilities of the TRAK K3KMX 3 Knee Mill (32" x 16", 3HP) with ProtoTRAK KMX CNC, configured to operate on 440V. • Required Features/Components/Salient Characteristics: • 440V K3KMX – Voltage Conversion from 220V to 440V • AUX KMX – Auxiliary Functions (3 Axis required) • CBB KMX – Cable Breakout Box • EHW KMX – TRAKing/Electronic Handwheel • LAMP K3KMX – Work Lamp • LSO K3 – Limit Switch Option (requires CBB KMX) • P TRAK RSG – Remote Stop/Go Switch • PTKMXOL – Offline Programming • OL CONV – Converter Package (Parasolid, DXF, Verify) • SPRAY COOL – Fog Buster Coolant System • USB MEM TRAK – 4.6GB USB Memory Drive • VISE 6 – Kurt DX6 Vise with Mounting Hardware Tooling for Mill (ISCAR or Equal): Required Features/Components/Salient Characteristics: • 1 ea. Collet set 25 pc 1/8” to 7/8” capacity increments of 1/32” • 1 ea. Face Mill holder R8 ¾” pilot Dia 4.7” arbor length ¾” pilot Dia arbor length • 1 ea. Coromant 2” cut Dia ¾” arbor hole Dia 15.7mm max depth indexable square shoulder face mill takes 5 inserts 90 deg lead angle 40.005mm high • 1 ea. End mill set ¼” to ½” Dia 4 flute square end solid carbide ALrN finish center cutting single end 4 pc • 10 ea. Coromant milling insert solid carbide TiCN & Tin finish 0.1875” thick 0.3780” wide • 1 ea. Drill chuck 7/64” to 5/8” capacity integral shank mount RB keyless taper shank 2 1/8” sleeve Dia • 2 ea. Machine Vise single station 6.0000” jaw width 9” jaw opening stationary base precision 1.7350” jaw height 18.2580” base length horizontal Functional Capabilities (Both Systems) The lathe and mill must provide: • Conversational programming capability • Manual or CNC operation modes, selectable • All options and accessories factory installed or installed by an authorized technician -- 2 of 2 --