Z2DA--DESIGN-BUILD CONSTRUCTION FOR UPGRADE PERIMETER SECURITY VA MEDICAL CENTER (VAMC), MARTINSBURG, WV

PROPOSAL SUBMISSION REQUIREMENTS AND INSTRUCTIONS, BASIS OF AWARD, AND EVALUATION CRITERIA (PHASE ONE ONLY) DESCRIPTION OF WORK The Department of Veterans Affairs (VA), Office of Information & Technology (OIT), IT Space and Facilities Management, maintains the Capital Region Readiness Center (CRRC), a Mission-Critical facility, located on the premises of the VA Medical Center (VAMC) campus in Martinsburg, WV. This requirement is for a Design-Build (DB) contract to design and install a perimeter security hardening (fencing, guard gate, bollards, etc.) of the CRRC facility that meets the requirements of the current VA Physical Security and Resiliency Design Manual (PSRDM) and VA Technical Information Library (TIL). The Design-Build Contractor (DBC) shall provide all resources necessary for full design and construction including site verification (surveying, underground utility location, etc.), equipment, labor, material, installation etc., for the deliverables described in this Statement of Work (SOW), except as otherwise specified. GENERAL INSTRUCTIONS This requirement will be advertised as a 100% Service-Disabled Veteran-Owned Small Business set-aside. Offerors submitting as a joint venture must provide the agreement forming the joint venture. All proposals shall be submitted electronically, except for the Bid Bond (required in Phase Two). All submissions shall be in Adobe PDF format. Offerors may use compressions utility software such as WinZip or PKZip to reduce file size and facilitate transmission. Title the file(s) in the following format: 36C10F26R0037_COMPANY NAME_ VOLUME I 36C10F26R0037_COMPANY NAME_ VOLUME II Submit proposals electronically via email to the following: Kelly Hawkins, Contract Specialist, Kelly.Hawkins2@va.gov Andrew Page, Contracting Officer, Andrew.Page@va.gov SUBMITTAL OF OFFERS: Offerors submitting proposals for this project should limit submissions to data essential for evaluation of proposals in preparing information required herein. However, in order to be effectively and equitably evaluated, the proposals must include information sufficiently detailed to clearly describe the Offeror's experience and capability, past performance, and use of small business necessary for successful completion of the project. Requirements stated in this RFP are minimums. The Offeror s conformance with the specified format, submission requirements, and the Offeror s attention to detail will be considered during the technical evaluation and trade-off. Material omission(s) may result in a deficiency, which may cause the technical proposal to be rejected as unacceptable. Technical proposals that do not provide the specified information in the specified location in accordance with the submission instructions may be found to have weaknesses or significant weaknesses. The Government is under no obligation to search for information that is not in the specified location. Responses that are essentially blanket offers of compliance are not adequate substitutes for the detailed and complete technical information necessary to establish that an Offeror can meet Government needs. The proposal submission instructions are written to give prospective contractors, where feasible, an indication of the level of detail desired by the Government. The Offeror s failure to include information that the Government has indicated should be included may result in the proposal being assigned a (significant) weakness and/or being found deficient if inadequate detail is provided. Any prescribed page and formatting limitations will be strictly adhered to and enforced by the Government. The Government will not evaluate any excess information resulting from the Offeror s failure to comply with the submission instructions. Exceptions. Do not include exceptions to the terms and conditions of the solicitation in either the technical or price proposal volumes. Inclusion of any standard company terms and conditions that conflict with the terms and conditions of the solicitation may result in a determination that the offer is unacceptable and thus ineligible for award. Resolve questions about the terms and conditions or technical requirements of the solicitation prior to submission of the offer. Restrictions on Offeror-Provided Information. Confidential projects cannot be submitted to demonstrate capability unless all of the information required for evaluation as specified herein can nonetheless be provided to the Government as part of the Offeror s technical proposal. Confidential Project is defined as projects containing confidential information of which reasonably could be expected to cause damage to the national security with the unauthorized disclosure. Offerors that include in their proposals information that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes, must clearly mark the information in accordance with FAR 52.215-1, Instructions to Offeror Competitive Acquisition , paragraph (e), Restriction on disclosure and use of data. Files shall not contain classified data. PROPOSAL FORMAT General Proposal Format: ALL Volumes shall contain: Title Page. Include the title of the solicitation, solicitation number, Offeror name, and date of the submittal. Table of Contents. Each volume of the proposal shall contain a detailed table of contents. Any materials submitted but not required by this solicitation (such as company brochures) shall be relegated to appendices. Tabs. Proposals shall be organized and tabbed in accordance with the tabbing per Phase and Volume. All Volumes shall be formatted as follows: Electronic Matter Submissions. Written material shall be on single sided 8 ½ x 11 size pages in no less than a 10 pitch or 10 font. Page limitations, where specified in the RFP, shall be considered a maximum. Pages in excess of any specified limitation shall not be evaluated. Number of Copies. Offerors SHALL submit an electronic version (PD…