What this opportunity is
NASA is seeking a vendor to recertify and refill anhydrous ammonia cylinders, specifically targeting the sole source provider, Boggs Fire Equipment Inc. This opportunity is set aside for 8(a) businesses under FAR 19.8, making it suitable for small businesses in the 8(a) program. Interested vendors should submit capability statements by the specified deadline, as this notice is for gathering qualifications rather than competitive bidding, meaning tracking the opportunity is essential for future reference.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
STATEMENT OF WORK
1. Objective/Requirements
Recertify CMASS Ammonia cylinders for Artemis III+
DESCRIPTION OF WORK
For each of the ammonia cylinders being sent out, perform the following:
1. Remove surface corrosion per MPCV 70156 TABLE C 1.0-1
2. Touch up areas of paint, as required, with Aqua-Shield and match the current
color of the cylinders as a best effort basis. Area of touch up should be
prepared and coating applied per manufacturer instructions.
2.1. If a full repaint of the cylinders are required: Prepare surface for corrosion
control, and painting touch up paint per manufacturer’s instructions if that
is not possible then, Prepare and paint carbon steel as follows: Degrease
per SSPC-SP 1, mechanically clean per SSPC-SP 2 or SSPC-SP 3 and
abrasive blast per SSPC-SP 10 to an anchor profile of 1.5-3.0 mils. All
rust shall be completely removed from pits and depressions. Remove
abrasive residue. Clean and dry the surfaces. apply a brush coating or
stripe coating with an inorganic zinc coating on all cutouts and sharp
edges. Apply a 4-6 mil dry film thickness inorganic zinc (IOZ) coating
(conforming to paragraph 4.1.2.1 of NASA-STD-5008) from the approved
products list of NASA-STD-5008 appendix a. The application of the
coating to the thickness required shall comply with the manufacturer’s
recommendations. NACE inspection is required for all surface
preparations and coating applications per section 5.2 of NASA-STD-5008.
Paint cylinder surface to match best effort color match
3. Perform required 5-year inspection and requalification per 49 CFR 180.209,
49 CFR 180.215, and per CGA Pamphlet C-6 or C-6.3
4. Mark cylinders with Inspection requalification date, apply hazardous material
sticker
5. Provide certificate of inspection, including RIN, provide an inspection report in
prescribed form of the results of the cylinder retest and/or inspection.
6. Refill with anhydrous ammonia that meets the requirements of MPCV 70156
Table 3.5-4 “Ammonia” Procurement column.
7. Return cylinders to KSC.
For any cylinder that fails recertification perform the following:
-- 1 of 2 --
1. Remove dual valve assembly with attached dip tube, neck rings and caps
from cylinders and return to KSC.
2. Dispose of ammonia cylinder.
SUBMITTAL REQUIREMENTS
Work Schedule
Work must be complete in time to support Artemis III Orion processing.
Technical
The Subcontractor shall submit all quality documentation and certifications for personnel
supporting the machining/fabrication tasks and for any material purchased and provided
for the component(s).
Data Deliverables
The Subcontractor shall provide a quote referencing the SOW, delivery timeframe,
estimated POP, and pricing.
Documentation
The subcontractor shall provide an inspection report in prescribed form of the results of the
cylinder retest and/or inspection.
2. Characteristics, Scope, and Specs
Quantity OEM Part # Product Description
5 79K40456
Serial Numbers:
692720, 692739, AF313682, AF313767, CX54986PS
Applicable specification:
MPCV 70156, 49 CFR 180.209, 49 CFR 180.215
DOT Specification:
4AA480
3. Place of Performance
Boggs Gases
4. Period of Performance
Need returned and in service by 12/28/2026
-- 2 of 2 --
Source: SAM.gov, as posted. Verify the current solicitation before responding.