F20641 Open Office Furniture 2025TP202

01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 7APRIL2026 Furniture Statement of Work Date: 04/20/2026 Facility# 20641 Area b 2388 Twelfth Street Wright-Patterson Air Force Base, OH 45433 Open Office Furniture 2025TP202 ID Project #: 2025TP-202 Tina Penick Interior Design Specialist Wright Patterson AFB CEG-Interior Design Specialist 5151 Wright Ave, Building 11 WPAFB, OH 45433-5339 937-656-3452 -- 1 of 20 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 7APRIL2026 Revision History Author Name Date Reason For Changes Version -- 2 of 20 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 7APRIL2026 1.0 Scope This project will be awarded on a competitive basis using total project cost. ALL PROJECTS: • The Contractor shall provide ALL supervision, labor, materials, equipment, including transportation to accomplish this project in accordance with this Statement of Work (SOW), project drawings and when applicable for this project a Certified Electrican to connect systems furniture power to building power.. • The Contractor shall provide 30 days storage, and the requirements contained in the soliciting documents. • The Contractor shall include an itemized quote that includes labor to receive, inspect, deliver to project job site, and install product per approved final design layout. • The Contractor shall provide 3D Renderings of each typical. • The Contractor may include AutoCAD design hours for all phases of design (initial, revisions and final). o No CAD files will be provided with a Baseplan included unless the vendor is NIST SP800-171 Certified Level 1 (until 9-NOV-2026 or after Level 2). Once awarded and after completion of construction if applicable, contractor is responsible for field verifying space. • The Contractor may include design hours for in person meetings to review all phases of design (initial, revisions and final), finish selections, site visits (field measurement), and any other means and methods for the contractor to execute the project. • Reference section 2.2.11 for updated power harness requirements per UFC 3-520-01 (Change 2, 12 April 2021). • For this project repair/replace flooring and ceiling, where applicable if damaged upon furniture installation of project. All patch and repair should be consistent finish level of the existing wall with no paint lines visible from patch. • The Contractor shall provide products from a single manufacturer to achieve uniformity in finish and appearance within office/space. Reference basis of design per product for suggestion or if equal manufacturer is proposed, follow the same on following products of same basis of design finish unless otherwise noted. • The Contractor shall provide final installation autocad dwg file and invoice emailed to CE Interior Designer before CE will do any acceptance in WAWF. FOR THIS PROJECT: • The contractor shall be responsible for supplying all labor and materials when applicable for a Certified Electrician from Master Electrical Contractors Association (MECA) to hook up the Systems Furniture to Building power, to accomplish this project in accordance with this Statement of Work (SOW), project drawings. • The Contractor shall provide power poles for the workstations. A certified electrician shall provide hardwire connection complete from the workstations to building power. Provide break box labeling for new and/or altered circuits. • The Contractor shall provide door handles with door lock cylinders to accept small- format interchangeable-core cylinders with seven-pin tumblers fully compatible with the Stanley Best Access Systems 1E series on all doors for open office, private office, and conference rooms as referenced in section 2.2.15 listed in this package. -- 3 of 20 -- 01-SOW Statement of Work -Furniture Package Wright Patterson AFB, OH DAF version 7APRIL2026 Site Visit Scheduled: To Occur 1 week after Solicitation Posting if Requested For this project we require the following product types: Systems Furniture, Freestanding, Seating, Tables, and Privacy Pods Minimum Technical Requirements PRODUCT –Basis of Design- TAG/TYPICAL DESCRIPTION QTY E TYPICAL E 9x10, 90 SqFt E Boss Box, Modular Systems Furniture Components, Freestanding and Panel Mounted, HPL Surfaces, Center Grommets, Storage Pedestals, Locker,, Height Adjustable Base, Dual Monitor Arm, and Power Module. P-Panels, See Typical for Panel Width, See Elevation for Tile Selection and Panel and Tile Heights; 79"-82"H +/- (32"H, 16"H, 16"H. 16"), Powered (Px-P), Non-Powered (Px-NP), Power Panels to Include 3 Duplex Receptacles and 2 Voice/Data port Per Cubicle (See Furniture Plan for Power Input Locations), Glass Stack, Sliding Frosted Glass Door. See cutsheet 00 for MTR and Panel Elevations. 1 - WS1 - WORKSURFACE, Straight Top, 72x30, Worksurface Top for HAW, Center Grommet, 10" laminate modesty 1 - HAW3 - HEIGHT ADJUSTABLE BASE, 70x28, Electric Height Adjustable T-Leg Base, Electronic Control, 1- WM- Wire Cable Management (min 24"wide, flame retardant mesh basket, velcro ties to secure cables, 1 fixed side with 1 removable side for access, supports min 10lbs, finish offered in black and silver/gray) 1 - CS2- Monitor Arm, Dual Arm (Fellows Evolve or Edge2) or Equal, Grommet and Clamp Mount, Wire Management Down Arm, One Finger Adjustment, 360 degree movement, Capable of Supporting Monitor Size of 35"wide each, Single Slider Adjustment per Monitor Mount, Vesa quick release, 180 degree lock-out feature, 90 degree swivel between portrait and landscape orientation, Lifetime Warranty, Finish-White 1 - PM1 - Power Module, Fellows (FlexCharge FCH4CX) or Equal, Personal Desktop Power, Clamp Mounted, min. 2 AC outlets, 1- USB- A and 1- USB-C quick charge, with attached power strip mounted below surface, UL and cUL listed, 8' power cord, Finish-White 1 - WS2 - WORKSURFACE, Rectangular Top, 36X24 Fixed, Panel Mount, Center Gro…