Open for responses
Large Component Blast Booth, 309 Aerospace Maintenance and Regeneration Group (AMARG), Davis-Monthan AFB, AZ 85707
DEPT OF DEFENSE
Notice type
Sources Sought
Solicitation #
FA8227-27-SS-AMARGLCBB
NAICS
332311
PSC
5450
Posted
November 17, 2026
Response due
December 19, 2026
Place of performance
Tucson, AZ
Description
Page 1 of 37
STATEMENT OF WORK (SOW)
LARGE COMPONENT BEAD BLAST BOOTH WITH
PRE-ENGINEERED METAL BUILDING
UNITED STATES AIR FORCE
OGDEN AIR LOGISTICS COMPLEX (OO-ALC)
09 November 2026
-- 1 of 37 --
Page 2 of 37
1. DESCRIPTION OF REQUIREMENT
1.1. Provide a complete and Turn-Key design, construction, and installation of a new corrosion control
facility at the 309th Aerospace Maintenance and Regeneration Group (AMARG), located within a
controlled area of Davis-Monthan Air Force Base (DMAFB), Arizona. The primary function is the
corrosion control of Aerospace Ground Equipment (AGE) and other ferrous related items. The media
blast booth will be housed within a fully enclosed Pre-Engineered Metal Building (PEMB) that also
provides a separated maintenance support operations area (MX Ops Area). The entire facility shall be
constructed on a currently unimproved site located North of Building 7213 (the Small Paint Booth), see
Appendix A.
1.2. The performing contractor is responsible for providing all management, professional services, labor,
materials, and equipment to deliver a fully functional and operational facility. The scope includes, but is
not limited to, the following key tasks:
1.2.1. The Contractor shall be responsible for developing a complete design package, which shall be
stamped and certified by licensed Professional Engineer(s) and Fire Protection Engineer(s)
registered in any of the 50 United States.
1.2.2. Plastic Media Blast Booth: Furnish, install, and commission a complete, stand-alone system. The
system must be appropriately sized for various AGE (Section 4.10.), include media recovery and
dust collection systems, associated controls, safety features, IAW hazardous location requirements.
1.2.3. PEMB (~60’ x 100’): Design, furnish, and erect a new, permanent, weather-tight metal building to
fully enclose the blast booth, and provide a separate maintenance operations area. The structure
must be fully compliant with all, but not limited to, architectural and engineering standards outlined
in the DMAFB Design Compatibility Guidelines.
1.2.4. Utilities and Site Work: Identify, design, and construct all supporting utility infrastructure;
electrical, water, sanitary sewer, etc. This includes all site work, foundations, grading, drainage, and
paving necessary to support the new facility.
1.3. Applicable guidance, regulations, & standards.
1.3.1. As the Designer of Record, the Contractor is solely responsible for research, identification, and
compliance with all federal, state, local, and Department of Defense and/or War guidance,
regulations, and standards. This includes, but is not limited to, all Unified Facilities Criteria (UFC),
Air Force Instructions (AFI), National Fire Protection Association (NFPA) codes, and DMAFB
Design Guidelines. The list provided in Appendix C is a baseline and is not exhaustive; the
Contractor is responsible for adherence to all applicable regulations regardless of whether they are
listed. In case of conflicting requirements, the most stringent regulation shall govern. The
Contractor’s licensed Professional Engineer of Record shall assume full professional liability for the
final constructed facility's compliance with all such governing criteria.
1.4. COTS Preference and Justification
1.4.1. The design shall prioritize and implement Commercial Off-The-Shelf (COTS) or modified-COTS
solutions for all components and assemblies.
1.4.2. Non-COTS Justification and Analysis: Proposing a Non-COTS (custom fabricated) component or
assembly is permissible only when it can be definitively proven that a COTS or Modified-COTS
solution is incapable of meeting mandatory performance specifications. In such cases, the
Contractor shall submit a formal Non-COTS Justification Report for each proposed item,
demonstrating the following:
1.4.2.1. Analysis of Alternatives (AoA): Documented market research and analysis proving that
no fewer than three (3) viable COTS or Modified-COTS alternatives can meet the
government's minimum performance requirements as stated in this SOW. The AoA must
detail why each alternative considered is technically insufficient.
1.4.2.2. Life Cycle Cost Analysis (LCCA): A comprehensive LCCA comparing the proposed
Non-COTS item against the closest COTS alternative (even if deemed insufficient). The
LCCA must be calculated over the 40-year engineered lifespan of the PEMB (as stated in
3.1.3) and shall include, at a minimum: initial acquisition and fabrication costs, installation,
projected energy consumption, and scheduled preventative maintenance costs.
1.4.3. The Contractor shall maintain a COTS Determination and Justification Log. This log must be
submitted with each design stage (30%, 60%, 90%) and must accompany each Non-COTS
Justification Report (CDRL A008) provided to the Contracting Officer (CO), Contracting Officer
-- 2 of 37 --
Page 3 of 37
Representative (COR), and Project Manager(s) (PMs) for review and written approval prior to any
procurement. The log shall include the minimum following fields:
1.4.3.1. Component Name
1.4.3.2. Required Performance Specification(s)
1.4.3.3. COTS Alternative(s) Considered (if any)
1.4.3.4. Justification for Non-COTS Selection (including specific reasons why COTS alternatives
were unsuitable)
1.4.3.5. Cost Comparison
1.4.3.6. Approval: All Non-COTS selections require prior written approval from the CO.
1.5. CONTROL SYSTEM, INTERFACE, AND CYBERSECURITY REQUIREMENTS
1.5.1. If applicable: All digital control systems are considered Facility-Related Control Systems and shall
be designed, installed, and documented to achieve a formal Authority to Operate (ATO) from the
cognizant Davis-Monthan AFB authorizing official. The Contractor shall be responsible for
developing the full Risk Management Framework (RMF) package in accordance with UFC 4-010-
06, Cybersecurity of Facility-Related Control Systems, and DoDI 8510.01. The system must meet,
at a minimum, the security controls for Impact Level 2 (IL2), unle…
Source: SAM.gov, as posted. Verify the current solicitation before responding.
Pursue this opportunity with Mindy
See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.
View the original notice on SAM.gov ↗Open opportunities in NAICS 332311
81--SHIPPING AND STORAGE C
DEPT OF DEFENSE · Combined Synopsis/Solicitation · due November 24, 2026
75150PR270000011 - MODIFIED CONEX CONTAINERS - USCG STATION POINT LOMA
HOMELAND SECURITY, DEPARTMENT OF · Combined Synopsis/Solicitation · due December 1, 2026
Equipment Shed
DEPT OF DEFENSE · Combined Synopsis/Solicitation · due November 18, 2026
54--FLOOR,PORTABLE SHELTER
DEPT OF DEFENSE · Combined Synopsis/Solicitation · due November 23, 2026
Large Component Blast Booth, 309 Aerospace Maintenance and Regeneration Group (AMARG), Davis-Monthan AFB, AZ 85707
DEPT OF DEFENSE · Sources Sought · due December 19, 2026
Market Survey: Manufacturing and Delivery of modular, transportable building units or shipping containers to Key West, Florida.
TRANSPORTATION, DEPARTMENT OF · Sources Sought · due November 19, 2026