Open for responses
Mounting Pads
ENERGY, DEPARTMENT OF
Notice type
Solicitation
Solicitation #
PR466526
NAICS
332710
PSC
5340
Posted
November 17, 2026
Response due
November 24, 2026
Place of performance
Oak Ridge, TN
Description
REQUEST FOR PROPOSAL (RFP)
RFP No.: PR-466526 – Amendment 3
Page 1 of 9
Request for Proposal
BSD-CS-2282 (Rev.2)
October 1, 2025
REQUEST FOR PROPOSAL (RFP)
1. INTRODUCTION
Date: 11/17/2026
RFP No.: PR-466526
RFP Description: Mounting Pads
Subject: RFP for Mounting Pads to support the Oak Ridge National Laboratory (ORNL) Enrichment Science and
Engineering Division
In Response Refer to: RFP No. – PR-466526
ORNL Procurement Officer: Taylor Hunt
Phone: (865) 341-3520
Email: huntmt@ornl.gov
Oak Ridge National Laboratory (ORNL) is a US Department of Energy (DOE) science and energy laboratory, conducting basic
and applied research to deliver transformative solutions to compelling problems in energy and security. ORNL is managed
and operated by UT-Battelle, LLC (Company). ORNL’s diverse capabilities span a broad range of scientific and engineering
disciplines, enabling the Laboratory to explore fundamental science challenges and to carry out the research needed to
accelerate the delivery of solutions to the marketplace.
The Company is pleased to invite your firm, herein referred to as “Offeror,” to submit a proposal in support of the subject
effort, as outlined in the attached Statement of Work or Specification and/or Technical Direction attached.
The Company reserves the right to update this RFP by amendment prior to date of award.
The Offeror’s proposal shall be prepared in accordance with the information provided in this RFP. Specific responses to the
Company’s requirements are necessary to enable the Company to evaluate Offeror’s understanding of and capability to
accomplish the stated objectives. Throughout the proposal, the Offeror shall provide sufficient detail to substantiate the
validity of all stated claims, comments, or positions. All proposed concepts must be shown to be technically feasible and
achievable within the allotted time limitations, and all performance and schedule requirements must be shown to be
realistic. The response shall correspond to the requirements of this RFP, unless otherwise specified in writing by the
Company. All Offerors are strongly encouraged to maintain an active registration in SAM.gov to facilitate verification of
small business status and eligibility.
2. RFP INFORMATION
Solicitation Number: PR-466526
Offers Due By: 11/24/2026 by 12:00 PM EST
Offer Validity Period: 120 days
NAICS Code: 332710 – Machine Shops – 500 Employees
Subcontract Type Anticipated: Firm Fixed Price
Small Business Set-Aside: No
Description of Supplies/Services Sought: Mounting Pads
Anticipated Subcontract Period of Performance: To be determined
-- 1 of 9 --
REQUEST FOR PROPOSAL (RFP)
RFP No.: PR-466526 – Amendment 3
Page 2 of 9
Request for Proposal
BSD-CS-2282 (Rev.2)
October 1, 2025
3. LIST OF RFP ATTACHMENTS
Attachment
No. Description Document Title (Date/Revision)
Attachment A Drawings
M-00155_Rev5 – CUI//SP-EXPT/NUC-UCNI
M-04014_Rev3 – CUI//SP-EXPT/NUC-UCNI
M-04005_Rev0 – CUI//SP-EXT/NUC
Rev 5
Rev 3
Rev 0
Attachment B Bill of Materials and
Pricing Sheet
RFQ466526 Bill of Materials and Pricing
Sheet – Amendment 3
11.17.2026
Attachment C Terms and Conditions Terms and Conditions – Commercial
Products and Services – BSD-CS-2146
09.30.2026
Attachment D Prime Contract T&C
Flow Downs
UT-Battelle Prime Supplemental
Flowdown Document (BSD-CS-2258)
09.30.2026
Attachment E Representations and
Certifications
Representations & Certifications –
Abbreviated (BSD-CS-2260)
03.09.2026
4. STATEMENT OF WORK/SPECIFICATIONS
Each potential Offeror Point of Contact (POC) will need to reach out to the Procurement Officer for a formal Export
Control Screening Process. Results from the Screening Process will determine if the POC is eligible to receive
Attachment A.
5. PROPOSAL PREPARATION
Preparation of Offers. (a) Offerors are expected to examine the drawings, specifications, descriptions, terms and
conditions, and all instructions. Failure to do so will be at the Offeror's risk. (b) Each Offeror shall furnish the
information required by the solicitation. The Offeror shall sign the offer. Erasures or other changes must be initialed by
the person signing the offer. (c) Unit price for each unit offered shall be shown and such price shall include packing and
shipping materials unless otherwise specified. A total price shall be entered for each item offered. Any tariffs shall be
expressly stated and priced separately. In case of discrepancy between a unit price and total price, the unit price will be
presumed to be correct. (d) Offeror must state a definite time for delivery of supplies or performance of services unless
otherwise specified in the solicitation. Time, if stated as a number of days, will include Saturdays, Sundays, and holidays
unless offeror expressly states offer is in business days. (e) Offers in strict accordance with the solicitation are desired.
Any exceptions should be referenced to related documents by title, page, and paragraph, and should be set forth in
detail. (f) This request does not commit Company to pay for any costs incurred in the preparation and submission of an
offer or for any other costs incurred prior to the execution of an Agreement.
Explanation to Prospective Offerors. Any explanation desired by a prospective Offeror regarding the meaning or
interpretation of the solicitation, drawings, specification, etc., must be requested with sufficient time allowed for a
reply to reach all prospective Offerors before submission of their offers. Any information given to a prospective Offeror
will be furnished to all prospective Offerors if such information is necessary in submitting offers or if the lack of such
information would be prejudicial to any other prospective Offerors.
Proposal Format. Offeror is requested to submit their proposal in MS Excel, MS Word, or PDF formats. Proposals must
be submitted on the forms furnished by the Company. If no form is provided, Offeror may submit their proposal in a
format of their choosing.
-- 2 of 9 --
REQUEST FOR PROPOSAL (RF…
Source: SAM.gov, as posted. Verify the current solicitation before responding.
Pursue this opportunity with Mindy
See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.
View the original notice on SAM.gov ↗Open opportunities in NAICS 332710
I.D. PLATE
DEPT OF DEFENSE · Solicitation · due December 7, 2026
49--ADAPTER,TEST
DEPT OF DEFENSE · Combined Synopsis/Solicitation · due November 23, 2026
53--DISK,SOLID,PLAIN
DEPT OF DEFENSE · Combined Synopsis/Solicitation · due November 27, 2026
53--PACKING ASSEMBLY
DEPT OF DEFENSE · Combined Synopsis/Solicitation · due November 27, 2026
CABLE ASSEMBLY,INTE
DEPT OF DEFENSE · Solicitation · due June 30, 2027
49--CABLE ASSY,AIRCRAFT
DEPT OF DEFENSE · Solicitation · due December 7, 2026