Skip to content

Open for responses

PIPE FITTINGS - FITTING ASSY

DEPT OF DEFENSE

Notice type
Combined Synopsis/Solicitation
Solicitation #
SPMYM127Q0003
NAICS
332912
PSC
4730
Set-aside
Small Business Set Aside - Total
Posted
November 12, 2026
Response due
November 19, 2026
Place of performance
Portsmouth, VA

What this opportunity is

The Department of Defense is seeking to procure various pipe fittings and assemblies, specifically bronze fitting assemblies, dog legs, and support coils, under a total small business set-aside. The solicitation is a Combined Synopsis/Solicitation, indicating that interested small businesses should track the notice closely for updates and may submit bids by the extended due date of November 19, 2026. The procurement falls under NAICS code 332912 and requires all items to be new, with no grey market products accepted.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

DLA MARITIME NORFOLK – CONTRACTING DIVISON PORTSMOUTH, VA 23709-5000 AMENDMENT SPMYM127Q0003P0001: This solicitation has been amended to add additional ordering data. This doesn’t change the scope of the requirement. All other terms remain the same. This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Part 13 using Simplified Acquisition Procedures (SAP). This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation WILL be posted to SAM at https://sam.gov. RFQ NUMBER: SPMYM127Q0003 BUYER: LATASHA PEARSON EMAIL ADDRESS: LATASHA.PEARSON@DLA.MIL This solicitation documents and incorporates provisions and clauses in effect though FAC 2026-01 and the DFARS Change notice 5/7/2026. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this website: https://www.acquisition.gov/. NNSY - Norfolk Naval Shipyard (DoDAAC: N42158) requests responses from qualified sources capable of providing the material that is referenced below. All items shall be new. No refurbished or used items will be accepted. This solicitation is set-aside for a small business. REQUIREMENT DESCRIPTION TABLE CLIN NUMBER DESCRIPTION QUANTITY U/I UNIT PRICE TOTAL CLIN 0001-6307Y094 FITTING ASSY 2 EA CLIN 0002-6307Y095 3" DOG LEG 1 EA CLIN 0003-6307Y096 3" SUPPORT COIL 4 FT CLIN 0004-6307Y110 FITTING ASSY 2 EA CLIN 0005-6307Y111 3" DOG LEG 1 EA CLIN 0006-6307Y112 3" SUPPORT COIL 4 FT CLIN 0007-6307Y113 FITTING ASSY 2 EA CLIN 0008-6307Y114 3" DOG LEG 1 EA CLIN 0009-6307Y115 3" SUPPORT COIL 4 FT ORDERING DATA: CLIN 0001-6307Y094 - QTY 2 EA - FITTING ASSY Part Number: EF-449A4-3-48(MOD) 1. Functional & Physical Design • Component Type: Straight Flange-to-Hose Adapter / End Fitting. • Connection Profile: Connects a segmented split-flange interface straight to a flexible marine hose line. • Size Designation ("3-48"): The "3" signifies compatibility with a 3-inch Iron Pipe Size (IPS) / nominal diameter hose. The "48" corresponds to the size in sixteenths of an inch (48/16 = 3 inches). 2. High-Grade Material Composition -- 1 of 81 -- To withstand highly corrosive marine and seawater environments, the HS449 fitting series utilizes a robust multi-metal design: • Body / Flange: High-strength Stainless Steel (indicated by the "-SS" designation). • Grip Segments: Typically constructed from Aluminum Bronze for superior wear and corrosion resistance. • Material: Bronze is the only acceptable material. • Hardware: The securing bolts, locknuts, and washers are manufactured from Monel, providing specialized resistance against harsh marine environments and galvanic corrosion. 3. Application & System Compatibility • Hose Compatibility: Designed for use with specialized military and industrial marine hose lines, including part numbers such as HS4265, HS4224, 2562, and 150901. • Interchangeability: This part serves as an exact functional equivalent to the Eaton Aeroquip part number 412-190767-3-48. • Compliance Standards: Built to comply with stringent military specifications governing shipboard fluid systems, including MIL-F-24787 guidelines. 4. MOD • The specific mod for this application is to upgrade the flange to a 250# Navy Flange CLIN 0002-6307Y095 - QTY 1 EA - 3" DOG LEG • Part Number / Equivalency: 90ELB-449E-48 (equal to Aeroquip P/N 412-190717) • Drawing Number: Hydrasearch Drawing D17859 (or D18475 for the SS variant) • Nominal IPS Size: 3 inches • Military / Standard Specification: MIL-DTL-24787/5 (Type D, Group IV) • Dimensions: o A: 5.96 inches o D: 3.04 inches (or ~3.09 in variant catalog) o R (Bend Radius): 2.09 inches o T: 5.58 inches • Estimated Weight: 14.00 lbs • Compatible Hoses: MIL-H-24135/4-48 • Material: Bronze is the only acceptable material CLIN 0003-6307Y096 - QTY: FT - 3" SUPPORT COIL • Manufacturer Part Number: ISC-48M • Equal To / Equivalent Aeroquip Part Number: FF090505-3266-501 • Material: Monel is the only acceptable material. • NAVSEA Approval: Approved for use per NAVSEA LTR. OPR. 3Y231 Serial No. 03Y23/252 DTD 02 AUG. 93. • Dimensions (Inches): o Dimension A: 3.27" o Dimension B: 0.500" o Dimension C: 0.048" o Dimension D: 0.375" • Primary Function: Inserted into flexible marine hose assemblies to provide internal structural support, prevent hose collapse under vacuum applications, resist kinking from tight installations, and protect the hose interior from mishandling or high-viscosity/extreme flow rate pressures (typically used alongside an internal support sleeve). • ONE CONTINUOUS LENGTH REQUIRED • 3” Internal Support Coil for use with MIL-H-24135/4-48 Hose -- 2 of 81 -- CLIN 0004-6307Y110 - QTY 2 EA - FITTING ASSY Part Number: EF-449A4-3-48(MOD) 1. Functional & Physical Design • Component Type: Straight Flange-to-Hose Adapter / End Fitting. • Connection Profile: Connects a segmented split-flange interface straight to a flexible marine hose line. • Size Designation ("3-48"): The "3" signifies compatibility with a 3-inch Iron Pipe Size (IPS) / nominal diameter hose. The "48" corresponds to the size in sixteenths of an inch (48/16 = 3 inches). 2. High-Grade Material Composition To withstand highly corrosive marine and seawater environments, the HS449 fitting series utilizes a robust multi-metal design: • Body / Flange: High-strength Stainless Steel (indicated by the "-SS" designation). • Grip Segments: Typically constructed from Aluminum Bronze for superior wear and corrosion resistance. • Material: Bronze is the only acceptable material. • Hardware: The securing bolts, locknuts, and washers are manufactured from Monel, providing specialized resistance against harsh marine environments and galvanic corrosion. CLIN 0005-6307Y111 - …

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 332912