Skip to content

Open for responses

Solicitation - Sword Belt, buckles, & Frog United States Military Academy West Point, NY

DEPT OF DEFENSE

Notice type
Solicitation
Solicitation #
W911SD27QA006
NAICS
316990
PSC
8305
Set-aside
Small Business Set Aside - Total
Posted
November 6, 2026
Response due
November 30, 2026
Place of performance
West Point, NY

What this opportunity is

The Department of Defense is seeking a supplier for official sword belts, buckles, and frogs for the United States Military Academy at West Point, NY, under NAICS 316990. This solicitation is set aside for small businesses, making it an ideal opportunity for companies that meet the criteria. Interested vendors should review the attached specifications manual carefully, as compliance with detailed requirements is mandatory. Note that this is a solicitation notice, indicating that businesses should prepare to submit bids rather than simply track the opportunity.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

SPECIFICATIONS MANUAL Official Sword Belt, Buckle & Frog Requirements * SEE ATTACHED DOCUMENTS FOR COMPLETE SPECIFICATIONS, DETAILS & INSTRUCTIONS * * MUST MEET OR EXCEED SPECIFICATIONS * 1. Sword Belt Specifications The sword belt shall consist of a 1-11/16 inch wide waist belt with a buckle back flap sewn to the belt. There shall be two belt sizes to encompass most sizes. The belt shall have a metal buckle w/ emblem, a metal buckle clasp receiver, two belt loops (leather keepers) that shall match the belt and a metal post on the buckle emblem end. Leather Quality: The leather for the sword belt shall be flexible and free from any imperfections affecting its appearance or serviceability. The leather shall be 5.5 to 6.0 ounces in thickness, hand bordered cowhide, strap, and vegetable tanned, leather filled body and drum dyed black throughout. The color shall be black and shall show fair fastness to crocking, staining and perspiration. The thickness of the leather shall be determined by a Woburn gauge or similar accepted standard gauge. Belt Size Finished Belt Length Flap Detail Total Length Large Approx. 54 inches Sewn-on 4 inch flap Approx. 57 inches Small Approx. 45 inches Sewn-on 4 inch flap Approx. 48 inches Grooves & Holes: The belt shall have two parallel grooves, approximately 1/32 inch wide, approximately 1/4 inch from each edge of belt, approximately 1-1/8 inch apart from each other running the entire length of the belt. Both the large and small belt shall have 15 holes punched, vertically centered with a horizontal slit pointing away from the buckle end. These holes will accommodate the size adjustment post and still hold the post in place during wear. Adjustment Post: The post shall be brass and shall be permanently and rigidly attached through the belt 3/4 of an inch, vertically centered, from the end of the belt. The post ball (top) shall be approximately 5/16 inch in diameter. Overall height of the post is approximately 1/2 inch. Flap & Keeper: The flap shall be 4 inches long by 2-5/16 inches wide at the widest part and 1-7/16 inches (tapered) on the end that attaches to the belt. The flap shall be laid and sewn on over the belt end that is folded over to secure the buckle receiver. The finished side of the leather flap shall face outward and shall serve as the background for the buckle emblem when the belt is buckled and worn. The Buckle Keeper shall be durable, and shall be attached to the left end of the belt so as when the person is donning the Buckle Keeper will be held with the left hand and the buckle emblem held with the right. -- 1 of 4 -- Loops & Finish: The leather belt loops shall be approximately 1/2 inch wide and match the belt and shall have 2 parallel grooves, 1/2cm apart, running the entire length. The Buckle Emblem belt loop (keeper) and the Buckle keeper shall be die struck brass. The color of the metal components shall be uniform throughout and shall be hand burnished on both sides. A pale, clear synthetic lacquer that shall not affect the color of the components shall be applied. Coating shall be free of air pockets and dust particles. Stitching: The belt flap shall be sewn on over the edge of the belt end that is folded over to secure the buckle clasp receiver. Stitching shall be consistent with standard industry standards and durable to stand up to normal wear and tear over a period of several years. Material shall be resistant to moisture damage and stand up to outside wear and weather. Stitching shall withstand heavy duty, prolonged use. -- 2 of 4 -- 2. Frog, Sword Belt Specifications Material & Dimensions: Leather shall be semi-rigid, 10 to 12 ounces in thickness, high grade cowhide, dyed black. Approximate dimensions shall be 5-1/4 inch tall by 2-7/8 inch wide at the widest point and 2-1/8 inch wide at the top. Opening & Stitching: Frog opening shall accommodate at least a 5.5cm wide belt. Stitching strength shall be sufficient to withstand heavier than normal use and wear. The leather shall be free from imperfections affecting its appearance or serviceability. The leather shall be hand bordered cowhide, vegetable tanned, leather filled body and drum-dyed black throughout. The color shall be black and shall show fair fastness to crocking, staining and perspiration. Sword/Scabbard Slot: The sword/scabbard slot shall be 'T' shaped with approximately a 1-1/2 inch opening at the top and a 1-5/8 inch vertical opening. The bottom of the T opening shall be approximately 3/4 inch above the bottom of the Frog. The bottom opening shall be approximately 2 inches wide. 3. Sword Belt Buckle Emblem & Belt Buckle Keeper Buckle Emblem Dimensions: Overall length shall be 6.5cm across center of Buckle Emblem and belt loop lengthwise and 5.1cm tall measured from the top of the belt loop end to the bottom of the belt loop. The Buckle emblem containing the Athena Helmet and wreath shall be 2 inches in diameter with a belt loop assembly as part of the emblem. The helmet shall face left toward the belt loop. The belt loop (keeper) inner height shall be sufficient to allow the belt to pass through and the opening at the bowed center (widest point) shall be sufficient enough to allow passing the belt and the size adjustment post to pass through. Buckle Keeper Dimensions: The Buckle Keeper piece shall be approximately 5cm tall and approximately 3cm wide at the widest point. The keeper inner area shall be approximately 4.3cm tall and 0.6cm wide, ample enough to allow the belt through and strong enough to withstand heavy wear. The smaller clasp hook receiver inner area shall be sufficient to allow the clasp to easily hook into and secure the belt for wear. Metal Components & Clasp: The Buckle-Emblem assembly and Buckle keeper piece shall be Die Struck Brass. The back of the buckle shall have a clasp durably and permanently attached to hook into the keeper. This clasp must be attached in such a way to withstand heavy usage and more than normal wear stress. The clasp hook …

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 316990