Skip to content

Open for responses

TS-405 Vessel

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION

Notice type
Special Notice
Solicitation #
80NSSC27949127Q
NAICS
332420
PSC
5430
Posted
November 17, 2026
Response due
November 19, 2026
Place of performance
Stennis Space Center, MS

What this opportunity is

NASA is seeking to acquire two 200-gallon, 2,000 psig pressure vessels compatible with Monomethyl Hydrazine and Nitrogen Tetroxide services, with the intention to issue a sole source contract to Prentex Alloy Fabricators, Inc., the only provider of the TS-405 Vessel. This procurement falls under NAICS code 332420 and is classified as a Special Notice, meaning interested small businesses should submit capability statements rather than bids. The performance will take place at NASA's Stennis Space Center in Mississippi, and responses are due by 4:00 p.m. CST on November 19, 2026.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

NASA | WHITE SANDS TEST FACILITY Pre-Decisional Draft | Acquisition Planning STATEMENT OF WORK Fabrication and Delivery of Two 200-Gallon, 2,000 psig Pressure Vessels Delivery Location NASA White Sands Test Facility (WSTF) 12600 NASA Road Las Cruces, NM 88012 Fluid Service Compatible with Monomethyl Hydrazine (MMH), Nitrogen Tetroxide (N₂O₄) service Quantity Two - identical pressure vessels Acquisition Basis Exact configuration of vessels built for TS403 (reference data plates on following pages) Target Lead Time Approximately 20 to 30 weeks after award, subject to confirmed production schedule Vendor Prentex Alloy Fabricators, Sunnyvale Texas 1. Background NASA is reactivating TS405 to support mission critical propulsion test capability at WSTF. The project requires two pressure vessels for the TS405 propellant skid. The required vessels are to duplicate the proven vessel configuration already in service at TS403. 2. Objective Provide two complete, ASME code stamped pressure vessels that match the TS403 vessel configuration (S/N, E- 250, E-251). The vendor shall fabricate, test, document, preserve, and ship the vessels to WSTF. 3. Technical Requirements  Quantity: Two identical pressure vessels  Nominal capacity: 200 gallons each  Maximum allowable working pressure/design pressure: 2,000 psig (minimum).  Design temperature range: -20 °F to +150 °F.  Material: Stainless steel 304/304L.  Fluid Service: Monomethyl hydrazine (MMH), Nitrogen Tetroxide (N₂O₄). All wetted materials, fabrication processes, cleanliness provisions, etc. shall be suitable for the specified hypergolic propellant service.  Configuration: Match the NASA approved TS403 vessel configuration (S/N – E-250, 251), vendor to provide submittal drawing to be approved by NASA prior to fabrication.  Code: Design, manufacture, inspect, test, and stamp in accordance with the applicable edition of ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. Register each vessel with the National Board.  Interchangeability: Critical dimensions, nozzle locations, interfaces, materials, and mounting features shall be compatible with the existing NASA configuration unless NASA approves a deviation in writing.  No substitution or design deviation is permitted without prior written NASA approval. -- 1 of 2 -- NASA | WHITE SANDS TEST FACILITY Pre-Decisional Draft | Acquisition Planning 4. Scope of Work 1. Review the NASA furnished Statement of Work information and identify any conflicts before fabrication. 2. Prepare and submit fabrication drawings and code calculations for NASA review. 3. Procure materials with traceability appropriate to the governing code. 4. Fabricate, inspect, nondestructively examine as required, hydrostatically test, stamp, and register each vessel. 5. Provide protective preparation for shipment and transport the completed vessels to WSTF. 5. Deliverables Deliverable Content Due Fabrication submittal Drawings, design calculations, material list, and planned code compliance approach Prior to fabrication Status updates Schedule and risk updates Monthly or upon material change Test package Hydrostatic test results, required NDE records, and code documentation Before shipment Final data package As-built drawings, material certifications, ASME data report, National Board registration, certificates, and shipping records With shipment Hardware Two completed vessels, preserved and protected for transit At delivery 6. Inspection and Acceptance NASA acceptance will be based on review of the final data package, verification that each vessel conforms to the approved configuration and code requirements, satisfactory completion of required testing, and receipt at WSTF without unresolved damage or nonconformance. NASA reserves the right to witness the hydrostatic test with reasonable notice. 7. Schedule and Shipping The vendor shall provide its earliest achievable delivery schedule. The planning target is approximately 20 to 30 weeks after award. The completed vessels shall be shipped to: NASA White Sands Test Facility (WSTF), 12600 NASA Road, Las Cruces, NM 88012, Attention: Erin Woods. Shipping method, lifting points, supports, blocking, and protective measures shall prevent damage and preserve cleanliness and configuration for MMH/N₂O₄ service. -- 2 of 2 --

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 332420