Skip to content

Open for responses

USMA SS Women's Overblouse

DEPT OF DEFENSE

Notice type
Combined Synopsis/Solicitation
Solicitation #
W911SD27QA004
NAICS
315210
PSC
8410
Set-aside
Small Business Set Aside - Total
Posted
November 3, 2026
Response due
November 19, 2026
Place of performance
West Point, NY

What this opportunity is

The Department of Defense is seeking a vendor to manufacture women's overblouses under a small business set-aside, specifically for total small business concerns. This opportunity falls under NAICS code 315210 for apparel cut and sew contractors, with a size standard of 850 employees. The solicitation is issued in electronic format only, and interested small businesses should monitor SAM.gov for updates and submit quotes and samples via email by the specified deadline.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

PURCHASE SPECIFICATION: OVERBLOUSE, WOMEN'S Document Control Number: UQC S-02-06A | GL-PD-11-07 Revision Date: October 2024 (Supersedes edition dated 14 April 2008) Preparing Activity: Army - GL • GL-Army • S-02-06A-OVERBLOUSE ASU • INCH-POUND 1. SCOPE 1.1 Scope This purchase description covers the requirements for a long and short sleeve women's overblouse to be worn as part of the Army Service Uniform (ASU). 1.2 Classification The overblouse shall be one type in the following classes and sizes: Class 1: Short Sleeve Class 2: Long Sleeve Schedule of Sizes Short Torso (S): 4S, 6S, 8S, 10S, 12S, 14S, 16S, 18S, 20S, 22S Regular Torso (R): 4R, 6R, 8R, 10R, 12R, 14R, 16R, 18R, 20R, 22R Long Torso (L): 4L, 6L, 8L, 10L, 12L, 14L, 16L, 18L, 20L, 22L Extra Large (XL): 8XL, 10XL, 12XL, 14XL Note: The Class 2 (long sleeve) overblouse is available in five sleeve lengths: Short, Regular, Long, X-Long, and XX-Long. 2. APPLICABLE DOCUMENTS 2.1 General The documents listed in this section are specified in sections 3, 4, and 5 of this specification. This section does not include documents cited in other sections of this specification or -- 1 of 7 -- recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in sections 3, 4, and 5 of this specification, whether or not they are listed. 2.2 Government Documents 2.2.1 Specifications, Standards, and Handbooks The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the solicitation or contract. FEDERAL SPECIFICATIONS V-B-871 – Button, Sewing Hole and Button, Staple FEDERAL STANDARDS FED-STD-4 – Glossary of Fabric Imperfections COMMERCIAL ITEM DESCRIPTIONS A-A-50199 – Thread, Polyester Core, Cotton- or Polyester-Covered DEPARTMENT OF DEFENSE SPECIFICATIONS MIL-DTL-32231B – Cloth, Polyester/Cotton (Active Standard - Supersedes GL/PD 08- 01) MIL-DTL-32075 – Label: For Clothing, Equipage, and Tentage (General Use) MIL-T-43624 – Thread, Polyester, Spun MIL-C-44296 – Cloth, Fusibles FEDERAL ACQUISITION REGULATIONS (FAR) 52.209-4 – First Article Approval - Government Testing 2.3 Non-Government Publications The following documents form a part of this document to the extent specified herein. AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC Test Method 88B – Smoothness of Seams in Fabrics after Repeated Home Launderings -- 2 of 7 -- AATCC Test Method 143 – Appearance of Apparel and Other Textile End Products after Repeated Home Launderings AATCC Three Dimensional Smoothness Appearance Replicas AATCC Photographic Seam Smoothness Replicas ASTM INTERNATIONAL ASTM D 6193 – Standard Practice for Stitches and Seams AMERICAN SOCIETY FOR QUALITY (ASQ) ANSI/ASQ Z1.4 – Sampling Procedures and Tables for Inspection by Attributes 2.4 Order of Precedence In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 First Article When specified, a sample shall be subjected to first article inspection in accordance with 4.2. 3.2 Recycled, Recovered, or Environmentally Preferable Materials Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life-cycle costs. 3.3 Design The overblouse is a long-sleeve or short-sleeve, semi-fitted, hip-length style with front princess seams and a three-piece back. The overblouse has shoulder loops, a convertible collar, and a six-button front. The collar and shoulder loops have fusible interlinings, and the collar has stays. -- 3 of 7 -- 3.4 Materials 3.4.1 Basic Material The basic material for the overblouse shall be a polyester/cotton herringbone cloth conforming to MIL-DTL-32231B, Type I, Class 1. The finished cloth shall have a nominal weight of and shall feature a durable press and soil release finish. The color shall match Army Shade White 521. 3.4.2 Button Stay The button stay material shall be the basic material of the overblouse, or as an alternate, a commercial button stay material may be used. 3.4.3 Fusible Interlining The fusible interlining material for the shoulder loops, collar, front facings, and cuffs (Class 2) shall conform to Type V, Style B, Class 2 of MIL-C-44296. 3.5 Components 3.5.1 Buttons The buttons shall conform to Type II, Class K, Style 25, 19 line of V-B-871. The color of the buttons shall match Army Shade White 521. 3.5.2 Thread The thread used for stitching and seaming shall be cotton- or polyester-covered polyester core, Tex 31-35, 2-ply and Tex 25-30, 2-ply conforming to A-A-50199. The thread for the buttonholes and button sewing shall be Tex 31-35, 2-ply only. As an alternate, the thread may be Tex 30, 2- ply and Tex 25, 2-ply conforming to MIL-T-43624. Colorfastness requirements shall apply. The color of the dyed thread shall match Army Shade White 521. 3.5.3 Collar Stays The collar stays shall be made from a polyethylene terephthalate plastic sheet and shall measure in thickness, in width, and in length. The color shall be natural (clear or opaque). 5.0 ± 0.25 ounces per square yard 0.010 ± 0.001 inches 3/8 inches 2-1/4 ± 1/16 inches -- 4 of 7 -- 3.6 Labels Each overblouse shall have a size and combination identification-instruction label conforming to MIL-DTL-32075. 3.6.1 Size Label The size label shall conform to Type V, Class 2 of MIL-DTL-32075 and be positioned on the center of the top collarstand. 3.6.2 Combination Label The combination identification-instruction label shall conform to Type V, Cl…

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 315210