Z2JZ--Wellness Center Flooring Install / Service

SECTION 09 65 19RESILIENT TILE FLOORING SPEC WRITER NOTES: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the paragraphs. Specify type, color, size, thickness, and finish of tile in Section 09 06 00, SCHEDULE FOR FINISHES. Show floor patterns on drawings. PART 1 - GENERAL 1.1 DESCRIPTION: A. This section specifies the installation of // solid vinyl tile flooring, // // luxury vinyl tile, // // rubber tile,// // linoleum tile // and accessories required for a complete installation. 1.2 RELATED WORK: //A. Sustainable Design Requirements: Section 01 81 13, SUSTAINABLE CONSTRUCTION REQUIREMENTS. // B. Resilient Base: Section 09 65 13, RESILIENT BASE AND ACCESSORIES. C. Subfloor Testing and Preparation: Section 09 05 16, SUBSURFACE PREPARATION FOR FLOOR FINISHES. D. Removal of Existing Construction Containing Asbestos: Section 02 82 13.19, ASBESTOS FLOOR TILE AND MASTIC ABATEMENT. E. Color, Pattern and Texture for Resilient Tile Flooring and Accessories: Section 09 06 00, SCHEDULE FOR FINISHES. 1.3 SUBMITTALS: A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES. //B. Sustainable Design Submittals as described below: // //1. Volatile organic compounds per volume as described in PART 2 ‑ PRODUCTS.// //2. Postconsumer and preconsumer recycled content as described in PART 2 ‑ PRODUCTS.// // C. Manufacturer's Literature and Data: 1. Description of each product. 2. Resilient material manufacturer’s recommendations for adhesives, underlayment, primers, and polish. 3. Application, installation and maintenance instructions. D. Samples: 1. Tile: Each type, color, thickness and finish. 2. Edge Strips: Each type, color, thickness and finish. 3. Feature Strips: Each type, color, thickness and finish. E. Shop Drawings: 1. Layout of patterns as shown on the construction documents. 2. Edge strip locations showing types and detail cross sections. F. Test Reports: 1. Abrasion resistance: Depth of wear for each tile type and color and volume loss of tile, certified by independent laboratory. Tested per ASTM F510/F510M. 2. Moisture and pH test results as per Section 09 05 16, SUBSURFACE PREPARATION FOR FLOOR FINISHES. 1.4 DELIVERY: A. Deliver materials to the site in original sealed packages or containers, clearly marked with the manufacturer's name or brand, type and color, production run number and date of manufacture. B. Materials from containers which have been distorted, damaged or opened prior to installation are not acceptable. 1.5 STORAGE: A. Store materials in a clean, dry, enclosed space off the ground, protected from harmful weather conditions and at temperature and humidity conditions recommended by the manufacturer. Protect adhesives from freezing. Store flooring, adhesives, and accessories in the spaces where they will be installed for at least 48 hours before beginning installation. 1.6 QUALITY ASSURANCE: A. Installer Qualifications: A company specializing in installation with minimum three (3) years’ experience and employs experienced flooring installers who have retained, and currently hold, an INSTALL Certification, or a certification from a comparable certification program. 1. Installers to be certified by INSTALL or a comparable certification program with the following minimum criteria: a. US Department of Labor approved four (4) year apprenticeship program, 160 hours a year. b. Career long training. c. Manufacturer endorsed training. d. Fundamental journeyman skills certification. SPEC WRITER NOTE: Mock-up must be approved by Contracting Officer Representative (COR) in the project’s design stage before including requirement in specification. //B. Mockup: Build floor tile mockup to verify selections made under sample submittals and to demonstrate aesthetic effects and set quality standards for materials and execution. 1. Size: 9.3 sq. m (100 sq. ft.) for each type, color, and pattern. Locations as indicated on construction documents. 2. Contracting Officer Representative (COR) approved mockup may become part of the completed Project if undisturbed at time of Substantial Completion. // C. Furnish product type materials from the same production run. 1.7 warranty: A. Construction Warranty: Comply with FAR clause 52.246-21, “Warranty of Construction”. 1.8 APPLICABLE PUBLICATIONS: A. The publications listed below form a part of this specification to the extent referenced. The publications are referenced in the text by the basic designation only. B. ASTM International (ASTM): D2047-11 Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine D2240-05(R2010) Test Method for Rubber Property—Durometer Hardness D4078-02(R2008) Water Emulsion Floor Finish E648-14c Critical Radiant Flux of Floor Covering Systems Using a Radiant Energy Source E662-14 Specific Optical Density of Smoke Generated by Solid Materials E1155/E1155M-14 Determining Floor Flatness and Floor Levelness Numbers F510/F510M-14 Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method F710-11 Preparing Concrete Floors to Receive Resilient Flooring F925-13 Test Method for Resistance to Chemicals of Resilient Flooring F1344-12(R2013) Rubber Floor Tile F1700-13a Solid Vinyl Floor Tile F1869-11 Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride F2170-11 Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in Situ Probes F2195-13 Linoleum Floor Tile C. Code of Federal Regulation (CFR): 40 CFR 59 Determination of Volatile Matter Content, Water Content, Density Volume Solids, and Weight Solids of Surface Coating D. International Standards and Training Alliance (INSTALL): PART 2 - PRODUCTS 2.1 PERFORMANCE REQUIREMENTS: A. Provide adhesives, underlayment, primers, and pol…