Skip to content

Open for responses

Lifting Pull Strap

DEPT OF DEFENSE

Notice type
Solicitation
Solicitation #
W519TC27
NAICS
314994
PSC
5342
Set-aside
Small Business Set Aside - Total
Posted
November 5, 2026
Response due
November 23, 2026
Place of performance
White Hall, AR

What this opportunity is

The Department of Defense is seeking to procure Lifting Pull Straps, specifically a minimum of 13,500 units, under Solicitation W519TC27RA006. This opportunity is set aside for small businesses and involves a five-year, firm fixed price, indefinite delivery indefinite quantity (IDIQ) contract. Interested vendors should note that the solicitation is a total small business set aside, and they should carefully review the attached documents for specifications and updates, as well as track the solicitation for any amendments or additional information.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

DISTRIBUTION STATEMENT A. Approved for public release. Distribution unlimited MIL-DTL-4088L 1 April 2021 SUPERSEDING MIL-W-4088K 21 November 1988 DETAIL SPECIFICATION WEBBING, TEXTILE, WOVEN NYLON This specification is approved for use by all Departments and Agencies of the Department of Defense (DoD). 1. SCOPE 1.1 Scope. This specification covers woven nylon, textile webbing. 1.2. Classification. The nylon webbing will be available in the types and classes as specified (see 6.2). The types will conform to the requirements as specified in Table IV and V as applicable for the class specified. 1.2.1 Classes. Class 1 - Shuttle loom, nylon 6,6 Class 1A - Shuttleless loom, nylon 6,6 Class 2 - Shuttle or shuttleless loom, nylon 6 or nylon 6,6 1.2.1.1 Class reference. When procurement documents referencing this specification do not specify the class of webbing, any class in paragraph 1.2 may be used. Comments, suggestions, or questions on this document should be addressed: ATTN: DLA Troop Support, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of the address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database https://assist.dla.mil AMSC N/A FSC 8305 2. APPLICABLE DOCUMENTS INCH-POUND Source: https://assist.dla.mil -- Downloaded: 2021-04-21T14:51Z Check the source to verify that this is the current version before use. Copyright DLA Troop Support - Clothing & Textile Items of SupplyProvided by Accuris Licensee=Joint Munitions Command (JMC)-Pine Bluff Arsenal/5974512041, User=Fritsche, MatthewNot for Resale, 05/06/2025 07:29:27 MDT No reproduction or networking permitted without license from Accuris --``,,,`,,,,`,`,````,,,``,`,,,`,-``,,`,,,,-``,,`,,,,--- -- 1 of 26 -- MIL-DTL-4088L 2 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification, whether or not they are listed. 2.2. Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-1480 - Color Codes for Webbing, Textile; Manufacturers Identification MIL-STD-3064 - Evaluation of Quality of Textile Materials (Copies of these documents are available online at https://quicksearch.dla.mil.) 2.2.2 Other government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation or contract. FEDERAL TRADE COMMISSION Rules and Regulations Under the Textile Fiber Products Identification Act (Copies of this document are available online at https://www.ftc.gov.) 2.3 Non-government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. COLOR ASSOCIATION OF THE UNITED STATES (CAUS) (Copies of this document are available at https://www.colorassociation.com.) AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC EP1 - Evaluation Procedure for Gray Scale for Color Change AATCC EP2 - Evaluation Procedure for Gray Scale for Staining AATCC EP8 - Evaluation Procedure for AATCC 9-Step Chromatic Transference Scale AATCC EP9 - Evaluation Procedure for Visual Assessment of Color Difference of Textiles Source: https://assist.dla.mil -- Downloaded: 2021-04-21T14:51Z Check the source to verify that this is the current version before use. Copyright DLA Troop Support - Clothing & Textile Items of SupplyProvided by Accuris Licensee=Joint Munitions Command (JMC)-Pine Bluff Arsenal/5974512041, User=Fritsche, MatthewNot for Resale, 05/06/2025 07:29:27 MDT No reproduction or networking permitted without license from Accuris --``,,,`,,,,`,`,````,,,``,`,,,`,-``,,`,,,,-``,,`,,,,--- -- 2 of 26 -- MIL-DTL-4088L 3 AATCC TM8 - Test Method for Colorfastness to Crocking: Crockmeter AATCC TM16.3 - Test Method for Colorfastness to Light: Xenon Arc AATCC TM20 - Test Method for Fiber Analysis: Qualitative AATCC TM61 - Test Method for Colorfastness to Laundering: Accelerated AATCC TM81 - Test Method for pH of the Water-Extract from Wet Processed Textiles (Copies of these documents are available online at https://www.aatcc.org.) AMERICAN SOCIETY FOR QUALITY ASQ/ANSI Z1.4 – Sampling Procedures and Tables for Inspection by Attributes (Copies of this document are available online at https://asq.org.) ASTM INTERNATIONAL ASTM D1423/D1423M - Standard Test Method for Twist in Yarns by Direct-Counting ASTM D1776/D1776 - Standard Practice for Conditioning and Testing Textiles ASTM D1777 - Standard Test Method for Thickness of Textile Materials ASTM D1907/D1907M - Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method ASTM D3774 - Standard Test Method for Width of Textile Fabric ASTM D3775 - Standard Test Method for End (Warp) and Pick (Filling)Count of Woven Fabrics ASTM D3776/D3776M - Standard Test Methods for Mass Per Unit Area (Weight) of Fabric ASTM D6770 - Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method) ASTM D6775 - Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material (Copies of these documents are available online at https://ww…

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 314994