What this opportunity is
The Department of Defense intends to award a sole-source contract to Vantive US Healthcare, LLC for the purchase of PRISMAX and THERMAX services, as indicated in solicitation number HT941026N0080. This opportunity is suited for small businesses that can provide similar healthcare services under NAICS code 811210. Since this is a notice of intent to award on a noncompetitive basis, interested parties should monitor the solicitation for any updates rather than preparing to bid.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
1 of 15
MQS2-NG Task Order Template Type I Configuration as of 12 Feb 25 Page 1 of 15
Department of Defense
Defense Health Agency
Medical Q-Coded Support & Services – Next
Generation (MQS2-NG)
Type I Configuration - Task Order (TO) Performance
Work Statement (PWS) Template (as of: 15 Jan 2025)
Service:
Prismax & Thermax Warming/Cooling Equipment; Hypercare Full Service
Maintenance Contract
Location:
Naval Medical Center San Diego / Intensive Care Unit
Date:
JUNE 29, 2026
PART 1 PERFORMANCE WORK STATEMENT
The contractor shall provide all services, materials and equipment
necessary for the repair/maintenance of the (2) Baxter Prismax
Hemodialysis units and their components, (2) Baxter Blood warming units
located at Naval Medical Readiness and Training Center (NMRTC) San Diego
Intensive Care Unit– BLDG 1, 4th floor or BIOMED Engineering located in
-- 1 of 15 --
2 of 15
MQS2-NG Task Order Template Type I Configuration as of 12 Feb 25 Page 2 of 15
bldg. 1, ground floor, San Diego CA to ensure dependable and reliable
equipment operation. The scope of work performed under these
specifications includes the furnishing of all labor, and parts to perform all
repairs on equipment listed, to assure continued operation at their
designed efficiency and capacity.
NO. ECN SERIAL NUMBER MODEL MFR
1 174062 PX205218 955724 Baxter
2 174063 PX205215 955724 Baxter
3 174064 TX205357 955630 Baxter
4 174065 TX205356 955630 Baxter
PREVENTIVE MAINTENANCE:
• Perform service repair/maintenance to industry standards.
• Ensure that only FULLY QUALIFIED FIELD ENGINEERS and
TECHNICIANS who have gone through original equipment manufacturer
(OEM) or comparable third-party service schools for the above mentioned
equipment, shall be employed in the performance of any and all work
performed under this contract. Upon request, the contractor shall provide
training certificates (or notarized copies) to the Biomed Repair Division for
verification. The highest standard of professional capability and
electrical/mechanical workmanship is to be maintained throughout the life
of this contract.
• Make repairs to the extent necessary (as determined by inspection
tests or disassembly) to ensure a functional system that will efficiently serve
its intended purpose.
• All travel, on-site labor and repair parts needed to perform repairs.
• One scheduled preventive maintenance check according to
Manufacturer.
• 24 x 7 Telephone Technical Support
• Extend to the Government all commercial warranties on replacement
parts, consistent with standard industry practices.
-- 2 of 15 --
3 of 15
MQS2-NG Task Order Template Type I Configuration as of 12 Feb 25 Page 3 of 15
If vendor will exceed work outside of normal working hours; they must get
prior approval from the Head, BioMedical Department, before proceeding
with any repairs.
TITLE TO EQUIPMENT: The contractor shall not assume possession or
control of any part of the equipment. The Government retains ownership to
title thereof.
LIABILITY: The contractor shall not be liable for any loss, damage, or delay
due to any cause beyond his reasonable control including but not limited
to, acts of government, strikes, lockouts, fire, explosion, theft, floods, riot,
civil commotion, war, malicious mischief or acts of God.
UTILITIES: The contractor may use Government utilities, (e.g., electrical
power, compressed air, and water) that are available and required for any
service performed under this contract. The building engineer, to ensure
compatibility with the Naval Hospital Camp Pendleton electrical wiring and
equipment, must approve contractor electrical equipment.
ACCESS TO EQUIPMENT: The contractor shall be provided reasonable access
to all equipment that is to be serviced and utility outlets required to do the
service. The contractor shall be free to start and stop all primary equipment
incidentals to the operation of the maintained equipment after permission
is received from on duty personnel responsible for such equipment.
CONTRACTOR CHECK-IN/CHECK-OUT: The Contractor, or his representative,
is required to check-in and out at the Naval Medical Readiness and Training
Center BIOMED division bldg. 1, ground floor during the hours of 0730 -
1600 hours, Monday through Friday, prior to and upon completion of any
service/repair performed.
FIELD SERVICE REPORTS: The contractor, or his representative shall furnish
to:
Biomedical Engineering Division
Naval Medical Readiness and Training Center San Diego
Building 1, Ground Floor
Phone: (619) 532- 8010
E-mail: usn.san-diego.navmedcensanca.list.nmcsd-
medrepairlist@health.mil.
-- 3 of 15 --
4 of 15
MQS2-NG Task Order Template Type I Configuration as of 12 Feb 25 Page 4 of 15
A legible copy of the Field Service Report upon completion of work
performed. The contractor, or his representative, shall complete the
Government copy of this Field Service Report to include the following:
• Date and Time Notified
• Date and Time Arrival
• ECN (Equipment Control Number), Type, serial # and model #
• Time expended repairing/servicing
• Description of malfunction
• General Description of replaced parts and service performed
• Comments as to cause of malfunction
FIELD SERVICE REPORTS ARE REQUIRED TO APPROVAL OF ALL INVOICES
GOVERNMENT PERSONNEL: NMRTC employees will not perform
maintenance or attempt repairs to equipment while such equipment is
under the purview of this contract unless agreed to in writing by the
contractor.
PARTS AVAILABILITY: To ensure minimal equipment downtime, the
contractor shall maintain replacement repair parts and materials necessary
to perform each repair or supply said parts and materials within three (3)
days.
Normal Work Hours – This Agreement specified equipment maintenance be
performed during normal work hours – 7AM through 4PM, Monday
through Friday. Work performed on equipment listed above outside the
scope of the contract will be billed at the preferred labor rate.
After Hours – Work performed after 5P…
Source: SAM.gov, as posted. Verify the current solicitation before responding.