Open for responses
Silicone Free Annealing Oven
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
Notice type
Special Notice
Solicitation #
80NSSC27948735Q
NAICS
333994
PSC
4430
Posted
November 16, 2026
Response due
November 19, 2026
Description
Statement of Work (SOW)
Project: Silicone Free Annealing Oven
GENERAL INFORMATION
1.0 Scope of Work: This document describes the silicon free annealing oven for
installation in the cleanroom at NASA GSFC. The function of the oven is described,
including vacuum performance, size, construction (i.e., silicone free), cleanroom
compatibility, temperature range, calibratability, and other performance
characteristics. The document further describes the expectations for schedule of
completion of the work, support for packaging and shipping, support for installation
of the item and any needed training or customer support to get the tool operational,
and warranty of its performance for a one year time period.
2.0 Background: NASA GSFC has a need to anneal ultraclean samples at temperatures
up to 260 C. These samples are thin metal films on silicon substrates (or similar
metal and dielectric materials) and, post annealing, go on to become device wafers
for engineering prototypes and flight instruments and have requirements for
molecular and particulate contamination. The samples are relatively small (4” and
6” discs coated with thin films) so the oven needs to be sized appropriately for a
holder suitable for a small batch (up to 10) of such samples. The filtration and flow
control on the dry nitrogen purge are also critical as the samples tend to absorb
humidity and the goal of the annealing is reproducibility of the temperature cycle
without inducing unwanted aging in the samples. The oven will be housed in a
cleanroom environment and is expected to be fully cleanroom compatible and
silicone-free for all gaskets and interior and exterior parts, in order to reduce the
possibility of molecular contamination with difficult to remove contaminants like
silicone.
3.0 Objective: NASA GSFC will obtain a vacuum oven suitable for installation in a
cleanroom meeting specifications for interior cleanliness, nitrogen purge flow and
filtration, oven interior and exterior size (footprint and height), silicone-free
construction.
CONTRACTOR REQUIREMENTS
4.0 Technical Requirements or Description of the Work:
The oven shall be all new construction. No used or refurbished systems will be accepted.
The exterior of the oven shall be silicone free and suitable for a cleanroom environment
-- 1 of 4 --
The interior of the oven shall be clean polished surfaces that can be cleaned of particles
and do not shed particles
The oven shall be supplied with a nitrogen purge.
The oven nitrogen purge shall be filtered with a replaceable filter and have control over the
flow as indicated in the specifications
The oven shall have an interior sized to be suitable for a holder with 4” or 6” discs but not
exceed the overall exterior size indicated in the specifications
The oven shall be supplied with an Emergency Power Off (EPO) button or switch
II. Specifications
Work chamber (W x D x H): 15 x 14 x 14" (38 x 36 x 36 cm). Shelf supports restrict overall
clear width to 13.5” (35 cm)
Capacity: 1.6 cubic foot (45 liters).
Overall external dimensions (W x D x H): 32.5 x 39 x 21.5” (83 x 99 x 54.6 cm).
Heater with fast response open coils: Power Rating: 3 kW on 220-240/1/50-60 power
Operating range: 40°C to 260°C (104°F to 500°F). Minimum operating temperature is based
on 20°C ambient temperature measured at the fresh air inlet.
Temperature displays in degrees Centigrade unless advised otherwise at time of order.
Recirculating motor and fan wheel: 1/4 HP; airflow capacity: 240 CFM (18.9 LPS)
Horizontal airflow for maximum temperature uniformity: Uniformity Ratings: +/- 1°C at 100°C
+/- 2°C at 200°C +/- 3°C at 260°C
The oven performance for this design has been verified with a 9 point survey in an empty
oven after stabilization.
Standard Power and Utilities Required: Available Voltages: 240 Volts, 1-phase, 50/60 Hertz.
Max amp draw: 15.5A
Available Voltages for Additional Cost 208V,1-phase Full 3 kW Power, 50/60 Hertz
The Short Circuit Current Rating (SCCR) for this equipment is 5kA. The main electrical
connection on this equipment is not compatible with a Residual Current Circuit Breaker
(RCCB). If either of these options require higher ratings to comply with facility requirements,
contact Despatch Engineering for feasibility and pricing information.
Process gas (Nitrogen, inert gas or CDA) 58-86 psi (4-6 bar)
200 FH (95 lpm) maximum
-- 2 of 4 --
1/4" NPT connection
Cooling water inlet, outlet and drain 100 psi (6.9 bar) max, 20 psi (1.4 bar) minimum
pressure differential
2 gpm (7.6 lpm) nominal, 5 gpm (19 lpm) maximum
Three (3) 3/8" NPT connections
LCD display shows temperature process value and setpoint, high limit setpoint, and time or
profile progress
Three operating modes for quick and easy operation: Manual mode, Timer mode, Profile
mode
Four dry contact relay outputs can be configured to function as alarms, events, or end of
cycle, in any operating mode
Consists of a red light and a small alarm horn. A switch is provided to silence the alarm.
Shelf dimensions (W x D) are: 14.60 x 13.75" (37.0 x 35.0 cm).
Max 25 lbs. (11 kg) per shelf. Overall load capacity of 200 lbs. (90 kg).
Oven can accommodate up to five (5) shelves.
Forced exhaust: 35 CFM (16.5 LPS) for rapid cooling (Air atmosphere models only) or for
process gas exhaust.
Microprocessor-based temperature and high-limit controller with large LCD display and real
time clock for auto start capability.
Air & Nitrogen atmospheres available.
Magnehelic™ gauge monitors and indicates the HEPA filter pressure providing an indication
of filter status and the need for filter maintenance.
Lockable Disconnect Switch on the control panel for easy servicing.
Programmable door locks prevent the door from opening when a cycle is in process. Door
switch terminates power to the heater when door is open.
Electric door-release for ergonomic operation.
A 1” (2.5 cm) port with tri-clamp cap in rear of oven for temperature surveys.
End of Cycle/Hi limit Audible and Visual Alarm
RS-485 Mod…
Source: SAM.gov, as posted. Verify the current solicitation before responding.
Pursue this opportunity with Mindy
See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.
View the original notice on SAM.gov ↗Open opportunities in NAICS 333994
Vacuum Relief Furnace
DEPT OF DEFENSE · Solicitation · due November 30, 2026
Industrial Walk-In Oven
DEPT OF DEFENSE · Sources Sought · due November 20, 2026
Compressor-Dehydrator PN 11474244
DEPT OF DEFENSE · Presolicitation · due November 30, 2026
Industrial Walk-In Oven
DEPT OF DEFENSE · Sources Sought · due November 20, 2026
Custom R&D Industrial Furnace
ENERGY, DEPARTMENT OF · Solicitation · due December 1, 2026
Portable Liquid Nitrogen Circulation Heater
DEPT OF DEFENSE · Solicitation · due November 30, 2026