Skip to content

Open for responses

Small CNC Vertical Milling Machine

DEPT OF DEFENSE

Notice type
Sources Sought
Solicitation #
FA910127QB0XX_Small_CNC_Vertical_Milling_Machine
NAICS
333517
PSC
3417
Set-aside
Small Business Set Aside - Total
Posted
October 30, 2026
Response due
November 6, 2027
Place of performance
0, TN

What this opportunity is

The Department of Defense is seeking sources for two new small CNC Vertical Milling Machines, specifically under NAICS code 333517. This opportunity is set aside for small businesses, making it suitable for those in the machine tool manufacturing sector. As this is a Sources Sought notice, it serves to gather information rather than solicit bids, meaning interested vendors should track the opportunity for future solicitation announcements rather than submit proposals at this stage.

Analysis by Mindy, grounded in the SAM.gov notice.

Description

Specifications for Small CNC Vertical Mill at Arnold Engineering Development Complex (AEDC) Arnold Air Force Base, TN; Provide all materials, labor, and equipment necessary to provide a new fully functional Small CNC Vertical Milling Machine. Refurbished or remanufactured parts are not authorized for this requirement.  Machining center construction o Base, Bed and Headstock shall be Meehanite Cast Iron o Ways shall be hardened and ground preferably with linear roller bearings o Protective way covers for 3-Axis to protect ways and ball screws  Headstock Specification o Spindle speed 12,000 Rpm Maximum o Spindle bearings shall be cooled o Spindle drive motor 25 HP minimum o Spindle Taper shall be CAT 40/ CAT 40 Big Plus o Air blast required at tool change o Through spindle coolant  Tool Changer (Automatic) o Changer Magazine shall hold a minimum of 30 tools o Changer shall handle tools weighing up to 17 lbs o Changer shall hold tools 3” cutter dia., and 11” in length with adjacent pocket occupied o Changer Magazine shall hold 6” diameter with adjacent pocket empty  Work Table o Work table size  X-axis 36”  Y-axis 14” o X-axis travel 30” minimum o Y-axis travel 18” minimum o Z-axis travel 18” minimum o Integrated A-axis and tail stock o Table shall support a Minimum of 1,500 lbs o Table equipped with standard “T” slots  4 th Axis o 8” 90 Deg. high speed rotary head with continuous machining capability o Tailstock o 8” diameter 6-jaw chuck o All hardware and software required to operate -- 1 of 3 --  Controls o Manufacturers latest version with 15” minimum Color LCD o Controls cabinet shall be cooled o Minimum program memory shall be 32MB Memory o DNC Capability o Programming should be compatible with FANUC protocol o Controls equipped with conversational programming capability o Helical interpolation and Custom Macro B o AC Digital Servo & Spindle Drivers o High Speed Machining Capability o Engraving Function o Tool path simulation o Data Server 256MB (DNC) min o Machine shall be equipped with Renishaw style probe tooling for part inspection o Renishaw tool setter o Remove / Disconnect Wi-Fi o Ethernet Connectivity o Simultaneous all axis control o Spindle speed override o Axis feed override o Rapid feed override o Manual pulse generator o High speed 3D machining contour control  Accuracy o Repeatability for X, Y, & Z Axis shall be +/- .0003” o Positioning for X, Y, & Z Axis shall be +/- .0003”/12” o Positioning for A-Axis shall be +/- .0003”/12”  General o Auto Lubrication system o Internal coolant tank o Full coverage removable splash guards o Chip removal auger/conveyor o 24 Retention Knobs o Rigged tapping capability o High pressure coolant 1000 psi o Coolant mist collector o Coolant tank oil skimmer o Upgraded work area lighting o Thermal expansion countermeasure o Chip air blower o Thru spindle air during machining o Work area wash gun o Shower coolant -- 2 of 3 --  Contractor shall provide: o Machine shall be built to NFPA 70 and operate with AEDC power system which is 480V, 3PH, 60 HZ or quote package should include step down transformer to machine operation voltage. o Machine quote shall include 16 of the required retention knobs o Operating Manual, Electrical Manual, maintenance Manual, & Schematics, hard copy and digital o Machine shall be equipped with A-axis capabilities o Machine shall include lifting, leveling, and floor attachment hardware o Standard tooling package turret tool holders applicable for this machine. Include a $10,000 Kennametal Tooling Certificate  Verification After delivery the Contractor shall test run the machine at the site in accordance with functional tests for accuracy required by ISO/ANSI Standards.  Warranty o This machine shall be warranted against any defects in material, parts, and workmanship for 24 months after the date of installation. The control, servomotors and main spindle motor are warranted against defects in material, parts, and workmanship for 24 months after the date of installation.  Maintenance, Parts and Service o The Contractor or representative shall be capable of responding to a repair service call on-site within 36 hours and repair parts delivery within 48 hours after placement of order.  Packaging/Delivery o Provide all preservation, packaging, and packing to ensure safe delivery of the machine and related components to AEDC (FOB Arnold Air Force Base, TN 37389). Deliver Machine to AEDC for off-loading by AEDC personnel.  Installation/Training o Installation will be at the Arnold Air Force Base, TN; Arnold Engineering Development Complex’s Model Shop, West Shop, Building 451. Installation of the machine shall be accomplished by Model Shop personnel and supervised by factory trained servicemen. This service shall be included in machine cost. Installation kit shall be provided in machine cost. Two-day initial training on machine features and operation shall be accomplished beginning at machine startup following machine installation and shall be included in machine cost. -- 3 of 3 --

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 333517