Description
STATEMENT OF WORK
ARMORY ALARM SYSTEM MONITORING
USCG STATION WACHAPREAGUE
1. GENERAL REQUIREMENTS
The work consists of providing all labor, communications, equipment, and services
required to perform continuous 24 hours a day 7 days a week security alarm
monitoring for the Armory alarm system at Coast Guard Station Wachapreague,
located at 25 Atlantic Ave, Wachapreague,VA 23480. The alarm system to be
monitored is a DMP IDS solution (or government-approved equivalent).
2. COMMENCEMENT, PROSECUTION, AND COMPLETION
OF WORK
Upon acceptance, the contractor shall commence monitoring services as soon as
possible. The services shall proceed continuously in accordance with the contract
terms and option years. Daily operations and system signals must be maintained
without interruption.
3. SCOPE OF WORK
The Contractor shall provide professional off-site monitoring services for the
Station Armory's intrusion detection system (IDS) as follows:
Continuous Electronic Monitoring: Provide uninterrupted 24 hours a day 7
days a week electronic monitoring of the above alarm system.
Signal Transmission: Maintain secure GMS (cellular/IP) transmission channels
between the station's alarm panel and the contractor's UL-listed Central
-- 1 of 5 --
Monitoring Station to ensure signal delivery even in the event of local telephone
line disruption.
Emergency Dispatch & Notification Protocols: In the event of an alarm
activation, system fault, trouble signal, low battery, power failure, or tamper
alert, the contractor must immediately contact the Coast Guard Station
Wachapreague’s designated point of contact (POC) and, if required by the
station’s standing operating procedures, coordinate dispatch with the Accomack
Police.
Activity Reporting: Provide monthly signal activity, arm/disarm logs, and
system health reports to the designated Quality Assurance Evaluator (QAE) upon
request.
Annual System Testing: Support the Coast Guard in performing periodic testing
of system communication signals to verify connection integrity.
4. SITE VISIT
All bidders are strongly encouraged to visit the site to field-verify the existing
system configuration and signal strength before submitting bids. For area and
service formalization, appointment can be arranged through the Officer in Charge.
5. DESIGNATED CONTRACTING OFFICER’S QA EVALUATOR
(QAE) REPRESENTATIVE
Officer in Charge: BMC Bryant Gooch
336-504-9561
Bryant.j.gooch@uscg.mil.
Inquiries concerning any phase of this specification before or after award shall be
made directly to the QAE or the designated Contracting Officer.
6. CONDITIONS AFFECTING THE WORK
The Contractor should take such steps as may be reasonably necessary to ascertain
the nature and location of the work, and the general and local conditions which can
affect the cost of performing the work. Failure to do so will not relieve bidders from
responsibility for estimating properly the difficulty or cost of successfully
-- 2 of 5 --
performing the work. The government assumes no responsibility for any
understanding or misrepresentations concerning conditions made by any of its
officers or agents prior to the execution of this contract, unless included in the
request for quotes, specifications, or related documents.
7. AFTER AWARD OF THE CONTRACT
The contractor must immediately notify the QAE representative of their system
readiness and coordinate the transition of monitoring services prior to starting. All
work shall be done in accordance with this specification.
8. ORAL MODIFICATION
No oral statement of any person other than the Contracting Officer shall in any
manner or degree modify or otherwise affect the terms of this contract.
9. WORKMANSHIP
All monitoring, signaling, and system support services shall be accomplished in
accordance with the best standard industry practices, and by technicians thoroughly
experienced in security systems and central station monitoring. The work shall be
satisfactory to the Contracting Officer and the QAE.
10. PERMITS & COMPLIANCE
The contractor shall, without additional expense to the government, obtain all
licenses, certifications, and permits required for the prosecution of the monitoring
work. The contractor shall comply with all applicable federal, state, and local laws
and UL certification standards for security monitoring.
-- 3 of 5 --
11. CLEAN UP
In the event that on-site maintenance or technician service is required, all trash and
debris generated during the service call shall be removed from the site daily. The job
site shall be left in a clean and neat condition.
12. WORK OUTSIDE REGULAR HOURS
Routine on-site system testing, maintenance, or programming modifications shall be
performed during regular Coast Guard working hours (0700 to 1600, Monday
through Friday, excluding federal holidays). If the contractor desires to perform on-
site work outside regular hours, they must submit a written request to the QAE at
least forty-eight (48) hours in advance for approval.
13. UPON COMPLETION OF WORK
Upon initial system connection and any subsequent service or maintenance visits,
the contractor shall contact the QAE to verify that the monitoring signals are being
received properly at the central station and to arrange for inspection and formal
acceptance of the service.
14. IDENTIFICATION OF CONTRACTOR PERSONNEL AND
VEHICLES
All contractor employees entering the base must have a valid REAL ID, be US
citizens, be able to speak, read, and write English, and be able to pass a
Government security background screening.
The contractor shall provide a detailed list of all employees requiring access to
the QAE five (5) days prior to commencing any on-site work. The employee list
shall contain the employee’s full name, date and place of birth, current address,
and driver's license number/state.
Vehicles operated on government property must be registered, insured, and
maintained in a good state of repair.
-- 4 of 5 --
15. SAFETY REQUIREMENTS
Complia…
Source: SAM.gov, as posted. Verify the current solicitation before responding.