What this opportunity is
The Department of Defense is seeking services for preventive maintenance, unscheduled repairs, and certified air sampling for breathing air compressor systems at Edwards Air Force Base and Plant 42. This opportunity is open to all businesses, as there is no set-aside for small businesses. The work involves comprehensive maintenance tasks on specific compressor models, requiring contractors to provide all necessary resources. Interested parties should note that this is a combined synopsis/solicitation, indicating the need to track the opportunity closely rather than submit a formal bid.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
Page 1
Statement of Work
For
Breathing Air Compressor Systems
Preventive Maintenance, Unscheduled Repair,
and Certified Air Sampling
Edwards AFB Fire Emergency Services
and
Air Force Plant 42 Fire Department
Edwards AFB, CA
Revised 28 October 2026
(Supersedes SOW dated 19 October 2026)
-- 1 of 5 --
Page 2
1. SCOPE
This Statement of Work (SOW) provides for and outlines the requirements for conducting annual maintenance,
unscheduled repairs, and air samples on Bauer (TCOM-26 and DOTR26-WRAF) and Stallion (Centaur) compressor
systems utilized by the Edwards Air Force Base Fire Emergency Services and Plant 42 Fire Department. The Contractor
shall furnish all supervision, equipment, tools, labor, materials, and supplies necessary to perform the required work. The
work shall be performed in accordance with this SOW.
2. LOCATION and SITE VERIFICATION
The Contractor shall conduct work at Edwards AFB Fire Stations 1 and 4 and Plant 42 Fire Station 1. All required work
will be performed at these locations by the Contractor.
3. DESCRIPTION OF WORK
The intent of this effort is to have the department’s air compressor systems maintained and repaired in accordance with
manufacturer’s recommendations.
Annual Maintenance
Perform the following annual maintenance on the Centaur (Stallion Air Inc): replace oil and inspect oil pressure; inspect
air pressure gauges; calibrate CO monitor/moisture indicator; change purification filters and O-rings; service auto-drain
with a minor or major service kit; check auto drain for proper dump time; lubricate motor/engine; inspect on-off
button/emergency stop; inspect fill whips; inspect muffler, reservoir and drain; inspect regulators; inspect doors, panels,
and frame; inspect piping fittings and monitor for air leaks; ensure head bolts are at proper torque; inspect and clean
cooling fans; service final separator and replace O-rings; clean compressor; inspect compressor and fill system for air
leaks; inspect and replace air/intake filter; inspect and clean compressor coolers; inspect drive belts; check and record
inter-stage pressure readings; and inspect door opening air system and conduct air sampling in compliance with NFPA
1989.
Perform the following maintenance on the TCOM-26 (Bauer Compressors) and DOTR26-WRAF (Bauer Compressors) in
accordance with the manufacturer’s current recommendations and NFPA 1989, including but not limited to oil changes,
filter replacements, gauge calibration, CO monitor calibration, leak checks, and air sampling.
Unscheduled Repairs and Emergency Services
The Contractor shall provide diagnostic, troubleshooting, and unscheduled repair services for the Centaur (Stallion Air
Inc), Bauer (TCOM-26), and Bauer Mobile Breathing Air Compressor (DOTR26-WRAF) systems on an as-needed basis.
This agreement covers routine and emergency repairs; however, Major Overhauls, defined as the complete teardown and
rebuilding of the core compressor block, are considered out of scope of this BOA and must be acquired separately.
All repair work shall be executed via individual Task Orders issued against the Basic Ordering Agreement (BOA), or via a
formal modification to an existing Task Order, issued exclusively by the Contracting Officer (CO). The Contractor shall
adhere strictly to the following workflow:
a. Notification and Response Time: Upon equipment malfunction or total system failure, the designated
Government Point of Contact (GPOC) / Fire Chief (or authorized representative identified in the Task Order) will
notify the Contractor by telephone and email.
b. Emergency / Mission-Critical / Flight-Line Impacting Failures: For failures that directly compromise
immediate emergency response capabilities, structural firefighting operations, or flightline operations at Edwards
AFB (Station 1 or Station 4) or the Plant 42 Fire Station:
i. Contractor shall acknowledge receipt of notification within two (2) hours.
ii. Contractor certified personnel shall arrive on-site equipped for diagnosis within twenty-four (24) hours of
initial notification.
c. Routine / Non-Critical Failures: For auxiliary, secondary, or cascade line issues that do not immediately impede
primary response readiness:
-- 2 of 5 --
Page 3
i. Contractor shall acknowledge receipt within four (4) hours.
ii. Contractor-certified personnel shall arrive on-site within forty-eight (48) hours of notification.
d. Diagnosis and Itemized Estimate: Following on-site diagnostic inspection, the Contractor shall furnish a formal,
itemized written estimate to the Contracting Officer (CO) and the GPOC within twenty-four (24) hours of completing
the diagnostic inspection. The estimate must include:
i. Equipment serial number, equipment model, physical station location, and a detailed diagnostic description of
the root-cause failure.
ii. Itemized list of required part numbers and material costs, priced in accordance with the fixed percentage
discount for OEM parts established in the BOA (supported by vendor invoices/catalogs).
iii. Estimated labor hours broken down by pre-negotiated BOA labor rate categories.
iv. Estimated timeline for completion, including part-lead times and shipping schedules.
e. Task Order Authorization (Strictly Enforced): No repair work shall commence, no replacement parts shall be
ordered, and no costs will be reimbursed until a formal Task Order (or bilateral Task Order Modification) is signed
and issued by the Contracting Officer. Verbal authorization from any personnel or individual—including the Fire
Chief, Station Captain, Quality Assurance Evaluator, or Government Program Manager (GPM)—is strictly prohibited
and will not be recognized for payment.
f. Execution, Testing, and Final Acceptance: Once the Task Order (or Task Order Modification) is awarded, the
Contractor shall perform all work in accordance with the “Execution, Testing, and Final Acceptance” paragraphs of
this SOW.
4. PLACE OF PERFORMANCE
Fire Station-1: Bldg. 1223 Main Base, 145 Flightline Road, Edwards AFB, CA 93524…
Source: SAM.gov, as posted. Verify the current solicitation before responding.