What this opportunity is
The Department of Defense is seeking elevator repair and maintenance support services under NAICS 811310, specifically for the inspection, maintenance, and repair of elevator systems at Fort Huachuca in Arizona. This opportunity is set aside for small businesses, making it suitable for companies that qualify under this designation. Interested vendors should note that the solicitation notice type indicates they will need to track the opportunity closely for updates and amendments rather than submit a bid at this stage.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
Fort Huachuca, Directorate of Public Works
Preventive Maintenance of Electric Elevators
Check List
Test Performed: Preventive Maintenance (each visit)
Building & Unit Information
Building Name
Owner/Building Management Name
Building Address
Unit Identification / Unit PIN
8.11.2.1.1 INSIDE CAR INSPECTIONS
ASME Section
Pass
Fail
N/A
Door reopening device
8.11.2.1.1
Stop switches
8.11.2.1.1
Operating control dev.
8.11.2.1.1
Car floor and landing sill
8.11.2.1.1
Car lighting
8.11.2.1.1
Car emergency signal
8.11.2.1.1
Car door or gate
8.11.2.1.1
Door closing force
8.11.2.1.1
Power closing of doors or gates
8.11.2.1.1
Car vision panels and glass car doors
8.11.2.1.1
Car enclosure
8.11.2.1.1
Emergency exit
8.11.2.1.1
Ventilation
8.11.2.1.1
Signs and operating device symbols
8.11.2.1.1
Rated load, platform area, and data plate
8.11.2.1.1
Standby power operation
8.11.2.1.1
Restricted opening of car or hoistway doors
8.11.2.1.1
Car ride
8.11.2.1.1
Door monitoring system
8.11.2.1.1
Stopping accuracy
8.11.2.1.1
Machinery space/control space
8.11.2.1.1
Working areas in the car
- Means to prevent unexpected movement
- Unexpected car movement device
- Operating instructions for unexpected car movement
- Operating instructions for egress and reentry procedures
8.11.2.1.1
Equipment access panel electrical device
8.11.2.1.1
8.11.2.1.2 MACHINE/CONTROL ROOM/SPACE INSPECTIONS
ASME Section
Pass
Fail
N/A
Equipment exposure to weather
8.11.2.1.2
Means of access
8.11.2.1.2
Headroom
8.11.2.1.2
Means necessary for tests
8.11.2.1.2
Inspection and test panel
8.11.2.1.2
Lighting and receptacles
8.11.2.1.2
Enclosure of machine room/spaces, control room/spaces
8.11.2.1.2
Housekeeping
8.11.2.1.2
Ventilation
8.11.2.1.2
Fire extinguisher
8.11.2.1.2
Pipes, wiring, and ducts
8.11.2.1.2
Guarding of equipment
8.11.2.1.2
Numbering of elevators, machines, and disconnect switches
8.11.2.1.2
Maintenance path and maintenance clearance
8.11.2.1.2
Stop switch
8.11.2.1.2
Disconnecting means and control
8.11.2.1.2
Controller wiring, fused, grounding
8.11.2.1.2
Static control
8.11.2.1.2
Machinery supports and fastenings
8.11.2.1.2
Drive machine brake
8.11.2.1.2
Traction drive machines
8.11.2.1.2
Gears bearings and flexible connections
8.11.2.1.2
Winding drum machine
8.11.2.1.2
Belt-or chain drive machine
8.11.2.1.2
Motor generator
8.11.2.1.2
Absorption of regenerated power
8.11.2.1.2
Traction sheaves
8.11.2.1.2
Secondary and deflector sheaves
8.11.2.1.2
Rope fastenings
8.11.2.1.2
Terminal stopping devices
8.11.2.1.2
Operating devices
8.11.2.1.2
Governor over speed switch and seal
8.11.2.1.2
Car and counterweight safeties
8.11.2.1.2
Code data plate
8.11.2.1.2
Emergency brake
8.11.2.1.2
AC drives form a DC source
8.11.2.1.2
Slack rope device
8.11.2.1.2
Wiring diagrams
8.11.2.1.2
8.11.2.1.3 TOP-OF-CAR INSPECTIONS
ASME Section
Pass
Fail
N/A
Top-of-car stop switch
8.11.2.1.3
Car top light and outlet
8.11.2.1.3
Top-of-car operating device and platforms
8.11.2.1.3
Top counterweight clearance
8.11.2.1.3
Car, overhead, and deflector
8.11.2.1.3
Normal terminal stopping devices
8.11.2.1.3
Final Terminal Stopping Devices
8.11.2.1.3
Broken Rope, Chain, or Tape
Switch
8.11.2.1.3
Car Leveling Devices
8.11.2.1.3
Crosshead Data Plate
8.11.2.1.3
Top Emergency Exit
8.11.2.1.3
Counterweight and Counterweight
Buffer
8.11.2.1.3
Counterweight Safeties
8.11.2.1.3
Floor, and Emergency Identification
Numbering
8.11.2.1.3
Hoistway Construction
8.11.2.1.3
Hoistway Smoke Control
8.11.2.1.3
Pipes, Wiring, and Ducts
8.11.2.1.3
Windows, Projections, Recesses, and setbacks
Setbacks
8.11.2.1.3
Hoistway Clearances
8.11.2.1.3
Multiple Hoistways
8.11.2.1.3
Traveling Cables and Junction Boxes
8.11.2.1.3
Door and Gate Equipment
8.11.2.1.3
Car Frame and Stiles
8.11.2.1.3
Guide Rails Fastening and Equipment
8.11.2.1.3
Governor Rope. Governor ropes should be inspected and replaced as outlined for traction elevator suspension and compensating ropes
8.11.2.1.3
Governor Releasing Carrier
8.11.2.1.3
Wire Rope Fastening and Hitch
Plate
8.11.2.1.3
Suspension & Compensating Rose
- Wire suspension and compensating ropes shall be replaced
(a) if the broken wires are equally distributed per rope lay in the worst section of the rope exceeds the value shown in column A of table 8.11.2.1.3
(b) if the distribution of broken wires is unequal and broken wires
predominate in one or two stands, when the number of broken wires per rope lay in the worst section of the rope exceeds the values shown in column B of Table 8.11.2.3 (cc)(1); or
(c) if four or five wires, side by side, are broken across the crown of any strand, when the number of broken wires per rope lay in the worst section of rope exceeds values shown in column C of Table 8.11.2.1.3 (cc)(1); or
(d) if in the judgment of the inspector, any unfavorable condition,
such as fretting corrosion (red dust or rouge), excessive wear of individual wires in the strands, unequal tension, poor sheave grooves, etc., exists, the criteria for broken wires will be
reduced by 50% of the values indicated in Table 8.11.2.1.3(cc) (1)
for any of the three conditions described above; or
(e) if there is more than one valley break per rope lay.
- On winding drum m…
Source: SAM.gov, as posted. Verify the current solicitation before responding.