Skip to content

Open for responses

FIRE EXTINGUISHER INSPECTION, MAINTENANCE, RECHARGE, REPAIR, HYDROSTATIC TESTING

DEPT OF DEFENSE

Notice type
Combined Synopsis/Solicitation
Solicitation #
W5S09H27QA991
NAICS
811310
PSC
J012
Set-aside
No Set aside used
Posted
November 16, 2026
Response due
December 2, 2026
Place of performance
Camp Douglas, WI

Description

1 Statement of Work (SOW) For Portable Fire Extinguisher Inspection, Maintenance, Recharge, Repair, and Hydrostatic Testing Services - Blanket Purchase Agreement (BPA) Volk Field Air National Guard Base (ANGB) Camp Douglas, WI 54618 -- 1 of 9 -- 2 SECTION I – DESCRIPTION OF SERVICES 1. SCOPE The Contractor shall provide all management, labor, supervision, tools, materials, equipment, transportation, replacement parts, consumable extinguishing agents, quality control, and incidental services necessary to perform portable �ire extinguisher pickup, transportation, inspection, maintenance, recharge, internal examination, hydrostatic testing, repair, documentation, and return services, as required by individual Blanket Purchase Agreement (BPA) calls. Services shall be performed for Government-owned portable �ire extinguishers located at Volk Field Air National Guard Base (ANGB), Camp Douglas, Wisconsin 54618. Unless otherwise speci�ied in an individual BPA call, the Contractor shall pick up extinguishers from, and return extinguishers to, the Volk Field Fire Department or another Government-designated location on Volk Field ANGB. Inspection, maintenance, recharge, internal examination, repair, and hydrostatic testing may be performed at the Contractor’s place of business, provided the Contractor maintains custody, accountability, and protection of Government property from pickup through return and Government acceptance. The Contractor shall perform all work in accordance with: a. The manufacturer’s current instructions and speci�ications for the applicable extinguisher b. The most current edition of NFPA 10 c. Applicable federal, state, local, transportation, environmental, and safety requirements d. The requirements of this SOW and the applicable BPA call Where manufacturer instructions, applicable standards, or this SOW con�lict, the Contractor shall immediately notify the Contracting Of�icer (KO) or Contracting Of�icer’s Representative (COR), if appointed, and shall not proceed with the affected work until receiving written direction from the KO. This BPA is intended to support recurring requirements for portable �ire extinguisher inspection, maintenance, recharge, internal examination, hydrostatic testing, repair, and related documentation services. The Government will issue individual BPA calls on an as-needed basis. Each call shall identify, at a minimum: 1. Required service category or line item 2. Extinguisher type, size, quantity, and location, when available 3. Required pickup and return dates 4. Period of performance 5. Authorized not-to-exceed amount for repairs and replacement parts, if applicable 6. Whether temporary replacement or loaner extinguishers are required 7. Government point of contact for pickup, delivery, inspection, and acceptance The Government does not guarantee any minimum quantity or dollar value of services under this BPA. 2. BACKGROUND Volk Field ANGB requires serviceable portable �ire extinguishers to support installation �ire-protection requirements. Historically, the Government procured �ire extinguisher inspection, maintenance, recharge, repair, and hydrostatic-testing services through Government Purchase Card purchases, standalone contracts, and BPAs. The Government has determined that recurring requirements for these services are best supported through a single BPA with established unit pricing and procedures for individual calls. 3. REQUIREMENTS 3.1 General Requirements The Contractor shall: 1. Perform only services authorized by an individual BPA call or otherwise approved in writing by the KO. 2. Use trained and quali�ied personnel familiar with the applicable extinguisher types, extinguishing agents, maintenance procedures, and testing requirements. 3. Use new replacement parts only. Reconditioned, refurbished, salvaged, or used parts shall not be used unless speci�ically authorized in writing by the KO. 4. Use extinguishing agents and replacement components compatible with the speci�ic extinguisher manufacturer, model, capacity, classi�ication, and intended use. -- 2 of 9 -- 3 5. Maintain the original manufacturer, serial-number, speci�ication, UL, DOT, and other required markings unless their replacement or alteration is speci�ically authorized by the manufacturer, applicable regulation, and the Government. 6. Not substitute extinguishers, extinguishing agents, cylinders, valves, hoses, labels, or components without written Government approval. 7. Protect Government property from theft, loss, damage, unauthorized use, or substitution while in Contractor custody. 8. Immediately notify the Government of any lost, damaged, unserviceable, condemned, or potentially unsafe extinguisher. 9. Comply with all applicable requirements for transportation, handling, storage, recovery, recycling, and disposal of extinguishing agents and associated materials. 3.2 Pickup, Transportation, Custody, and Return 3.2.1 Pickup and Return The Contractor shall coordinate pickup and return times with the Government-designated point of contact. Unless otherwise stated in an individual call: a. The Contractor shall pick up, service, and return all �ire extinguishers within the period of performance speci�ied in the applicable BPA call. b. The Contractor shall notify the Government immediately when a return date cannot be met. c. The Contractor shall return extinguishers to the same location from which they were picked up unless otherwise directed by the Government. 3.2.2 Custody and Accountability At pickup, the Contractor and Government representative shall document the transfer of custody using a pickup manifest. The manifest shall identify 1. BPA number and call number 2. Date and time of pickup 3. Building and location 4. Extinguisher manufacturer and model 5. Serial number or Government asset number 6. Extinguisher type, agent, size, and classi�ication 7. Quantity 8. Known de�iciencies or visible damage At return, the Contractor shall provid…

Source: SAM.gov, as posted. Verify the current solicitation before responding.

Pursue this opportunity with Mindy

See who holds it now, who else is bidding, and draft your response — grounded in real government data, not generic AI.

View the original notice on SAM.gov ↗

Open opportunities in NAICS 811310