What this opportunity is
The U.S. Department of State is soliciting proposals for the supply, installation, testing, and commissioning of audiovisual systems for the Multi-Purpose Room and Executive Conference Room at the U.S. Embassy in Malé, Maldives. This opportunity is open to all businesses, as there is no set-aside for small businesses. Interested contractors should note that this is a solicitation notice, indicating the need to track the opportunity closely and prepare to submit bids in response to the solicitation.
Analysis by Mindy, grounded in the SAM.gov notice.
Description
UNCLASSIFIED
UNCLASSIFIED Page 1 of 2
Male, The Maldives; MPR and Executive
Conference Room
Audiovisual SOW, May 2026
Prepared by:
OBO DE EE AV
MPR:
The multi-purpose room is a large, flexible space designed to support a variety of audiovisual (AV) functions,
ranging from video teleconferencing to basic informational presentations.
Video SOW:
Content will be presented via dual 98-inch front-wall-mounted flat-panel displays. The AV input plate(s) shall
be used for GFGI laptop content for both local presentations and video conferencing calls. The plate(s) shall
include either a dedicated video transmitter and USB transmitter, or an RJ45 connection for both the video and
USB transmitters, with the actual hardware mounted below the MPR podium. Presentation sources will
include BYOD sources at a podium wall box and a rack mounted PC with USB extension to the wall box for local
keyboard/mouse and card reader functionality. The front-wall-mounted Vaddio camera shall be used for video
conferencing functionality. If there are multiple laptop connection points within the space, only one will be
utilized for BYOD, which makes the total number of BYOD devices two: the GFGI AV rack–mounted PC and the
podium or tabletop GFGI laptop.
A/V Rack:
All headend equipment shall be installed in the A/V cabinet located in the TR416 space.
Audio: Both local content audio and far-end audio from video conferencing shall be played through the
overhead speakers. Presenter and audience audio for VTC and voice lift will be provided by a ceiling mounted
microphone receiver and accompanying wireless conferencing microphones. A wireless Microflex solution shall
be provided. A total of eight Microflex microphones shall be used: four gooseneck, two handheld, and two
lavalier microphones. Microphone audio shall be transmitted to the far end, and local voice reinforcement
shall also be included.
Control:
A centralized control system shall be provided, with the processor installed in the A/V cabinet. The 10-inch
control panel shall be installed at the podium location. The control panel will serve as the primary interface for
controlling displays, audio levels, source selection, and other system functions.
The GUI shall be presented for approval prior to code deployment. Control panel should list all available
sources in the room and provide to options or un-route or clear any routed source:
Panel should provide volume controls via a slider bar for audio playback, all microphones, and mute
controls
Volume should be limited to appropriate maximum levels based on sources and room conditions
-- 1 of 2 --
UNCLASSIFIED
UNCLASSIFIED Page 2 of 2
All speaker zones and levels should be controllable
Additional notes:
UPS units, the audio processor, the control system, and other AV headend devices shall be installed in the AV
rack following Aixa standards.
The Vaddio AV Bridge, located in the rack, shall receive the Vaddio camera feed as well as analog audio
connections from the DSP. The Vaddio USB shall be extended to the AV wall box to allow GFGI laptop
connectivity for Soft-codec video conferencing. This USB connection shall enable full integration with the
laptop, including overhead speakers, the Vaddio camera, and the microphones.
An additional video input in the AV rack shall be provided for the Post-supplied Cable TV source. Recording
features may be added if required by Post personnel.
Executive Conference Room:
An executive conference room is a space used for local presentations as well as for Teams calls through the
GFGI PC.
Video SOW:
Content will be presented on a 98-inch display mounted on the front wall.
The video sources will include:
1. A GFGI PC located in the credenza.
2. A GFGI laptop connected to a wall-mounted transmitter.
The GFGI PC shall have an OpenNet connection. Both video sources shall be connected to a rack located 2×1
auto-switcher, with the PC designated as the priority source until a signal is detected from the laptop. Video
extenders over CAT6 shall be used to extend the auto-switcher’s output to the display.
The GFGI card reader shall be placed on top of the credenza, while the wireless keyboard and mouse shall be
placed on the conference table. All these peripherals shall be connected to the GFGI PC.
Audio:
Audio will play through the built-in display speakers. Volume control, as well as power on/off, will be managed
using the display’s remote control.
Control:
There will be no centralized control system. No control processors or touch panels are included.
Additional notes:
An all-in-one Poly bar will be used for video conferencing. The bar will be mounted below the display, at 3'-8"
to the center of lens. The bar will connect to the GFGI PC via a USB extender to support Webex, Teams, and
Zoom calls. The GFGI PC shall be the only video conferencing device in the system. The laptop shall be used
for presentation purposes only.
The A/V system design for both rooms shall follow OBO Specifications 274100, 270645, 271505, and 274114
-- 2 of 2 --
Source: SAM.gov, as posted. Verify the current solicitation before responding.